[Skiboot] [PATCH v2 07/10] npu2: Adjust content of the GENID BAR

[Alistair Popple]

Acked-by: Alistair Popple <alistair at popple.id.au>

On Fri, 21 Jul 2017 10:47:44 AM Reza Arbab wrote:
> Reflect the changed GENID BAR layout in POWER9 DD2.
> 
> Signed-off-by: Reza Arbab <arbab at linux.vnet.ibm.com>
> Cc: Alistair Popple <alistair at popple.id.au>
> Cc: Andrew Donnellan <andrew.donnellan at au1.ibm.com>
> Cc: Frederic Barrat <fbarrat at linux.vnet.ibm.com>
> ---
>  hw/npu2.c           | 4 ++--
>  include/npu2-regs.h | 5 +++--
>  2 files changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/hw/npu2.c b/hw/npu2.c
> index 5555159..3b6f8bf 100644
> --- a/hw/npu2.c
> +++ b/hw/npu2.c
> @@ -203,7 +203,7 @@ static void npu2_read_bar(struct npu2 *p, struct npu2_bar *bar)
>  		bar->size = 0x20000;
>  		break;
>  	case NPU2_GENID_BAR:
> -		bar->base = GETFIELD(NPU2_GENID_BAR_ADDR, val) << 17;
> +		bar->base = GETFIELD(NPU2_GENID_BAR_ADDR, val) << 16;
>  		enabled = GETFIELD(NPU2_GENID_BAR_ENABLE, val);
>  		bar->size = 0x20000;
>  		break;
> @@ -236,7 +236,7 @@ static void npu2_write_bar(struct npu2 *p,
>  		val = SETFIELD(NPU2_NTL_BAR_ENABLE, val, enable);
>  		break;
>  	case NPU2_GENID_BAR:
> -		val = SETFIELD(NPU2_GENID_BAR_ADDR, 0ul, bar->base >> 17);
> +		val = SETFIELD(NPU2_GENID_BAR_ADDR, 0ul, bar->base >> 16);
>  		val = SETFIELD(NPU2_GENID_BAR_ENABLE, val, enable);
>  		break;
>  	default:
> diff --git a/include/npu2-regs.h b/include/npu2-regs.h
> index fb85729..a10f74f 100644
> --- a/include/npu2-regs.h
> +++ b/include/npu2-regs.h
> @@ -122,8 +122,9 @@ void npu2_write_mask(struct npu2 *p, uint64_t reg, uint64_t val, uint64_t mask);
>  #define   NPU2_GENID_BAR_ENABLE			PPC_BIT(0)
>  #define   NPU2_GENID_BAR_GROUP			PPC_BITMASK(3,6)
>  #define   NPU2_GENID_BAR_CHIP			PPC_BITMASK(7,9)
> -#define   NPU2_GENID_BAR_NODE_ADDR		PPC_BITMASK(10,34)
> -#define   NPU2_GENID_BAR_ADDR			PPC_BITMASK(3,34)
> +#define   NPU2_GENID_BAR_NODE_ADDR		PPC_BITMASK(10,35)
> +#define   NPU2_GENID_BAR_ADDR			PPC_BITMASK(3,35)
> +#define   NPU2_GENID_BAR_POISON			PPC_BIT(39)
>  #define NPU2_LOW_WATER_MARKS			0x040
>  #define NPU2_HIGH_WATER_MARKS			0x048
>  #define NPU2_RELAXED_ORDERING_CFG0		0x050
>