[Skiboot] [PATCH v2 06/10] npu2: Add NPU2_GPU1_MEM_BAR

Reza Arbab arbab at linux.vnet.ibm.com
Sat Jul 22 01:47:43 AEST 2017


POWER9 DD2 has added a second GPU memory BAR. Use it, but continue to
program things the old way on DD1 systems.

Signed-off-by: Reza Arbab <arbab at linux.vnet.ibm.com>
Cc: Alistair Popple <alistair at popple.id.au>
Cc: Andrew Donnellan <andrew.donnellan at au1.ibm.com>
Cc: Frederic Barrat <fbarrat at linux.vnet.ibm.com>
---
 hw/npu2.c           | 22 +++++++++++-----------
 include/npu2-regs.h |  1 +
 2 files changed, 12 insertions(+), 11 deletions(-)

diff --git a/hw/npu2.c b/hw/npu2.c
index a752ab5..5555159 100644
--- a/hw/npu2.c
+++ b/hw/npu2.c
@@ -581,7 +581,7 @@ static int npu2_assign_gmb(struct npu2_dev *ndev)
 	struct npu2 *p = ndev->npu;
 	int peers, mode;
 	uint32_t bdfn;
-	uint64_t base, size, reg, val, old_val;
+	uint64_t base, size, reg, val, old_val, gmb;
 
 	/* Need to work out number of link peers. This amount to
 	 * working out the maximum function number. So work start at
@@ -598,13 +598,16 @@ static int npu2_assign_gmb(struct npu2_dev *ndev)
 	/* Base address is in GB */
 	base >>= 30;
 
+	gmb = NPU2_GPU0_MEM_BAR;
+	if (NPU2DEV_BRICK(ndev) && !is_p9dd1())
+		gmb = NPU2_GPU1_MEM_BAR;
+
 	reg = NPU2_REG_OFFSET(NPU2_STACK_STCK_0 + NPU2DEV_STACK(ndev),
-			      NPU2_BLOCK_SM_0,
-			      NPU2_GPU0_MEM_BAR);
+			      NPU2_BLOCK_SM_0, gmb);
 
 	val = npu2_read(p, reg);
 	old_val = val;
-	if (NPU2DEV_BRICK(ndev))
+	if (NPU2DEV_BRICK(ndev) && is_p9dd1())
 		val <<= 32;
 
 	val = SETFIELD(NPU2_MEM_BAR_SEL_MEM, val, 4);
@@ -640,21 +643,18 @@ static int npu2_assign_gmb(struct npu2_dev *ndev)
 
 	mode += ndev->bdfn & 0x7;
 	val = SETFIELD(NPU2_MEM_BAR_MODE, val, mode);
-	if (NPU2DEV_BRICK(ndev))
+	if (NPU2DEV_BRICK(ndev) && is_p9dd1())
 		val = (old_val & 0xffffffff00000000) | (val >> 32);
 
 	npu2_write(p, reg, val);
 	reg = NPU2_REG_OFFSET(NPU2_STACK_STCK_0 + NPU2DEV_STACK(ndev),
-			      NPU2_BLOCK_SM_1,
-			      NPU2_GPU0_MEM_BAR);
+			      NPU2_BLOCK_SM_1, gmb);
 	npu2_write(p, reg, val);
 	reg = NPU2_REG_OFFSET(NPU2_STACK_STCK_0 + NPU2DEV_STACK(ndev),
-			      NPU2_BLOCK_SM_2,
-			      NPU2_GPU0_MEM_BAR);
+			      NPU2_BLOCK_SM_2, gmb);
 	npu2_write(p, reg, val);
 	reg = NPU2_REG_OFFSET(NPU2_STACK_STCK_0 + NPU2DEV_STACK(ndev),
-			      NPU2_BLOCK_SM_3,
-			      NPU2_GPU0_MEM_BAR);
+			      NPU2_BLOCK_SM_3, gmb);
 	npu2_write(p, reg, val);
 
 	return 0;
diff --git a/include/npu2-regs.h b/include/npu2-regs.h
index 4b86f6f..fb85729 100644
--- a/include/npu2-regs.h
+++ b/include/npu2-regs.h
@@ -101,6 +101,7 @@ void npu2_write_mask(struct npu2 *p, uint64_t reg, uint64_t val, uint64_t mask);
 #define NPU2_PB_EPSILON				0x010
 #define NPU2_TIMER_CFG				0x018
 #define NPU2_GPU0_MEM_BAR			0x020
+#define NPU2_GPU1_MEM_BAR			0x028
 #define   NPU2_MEM_BAR_SEL_MEM			PPC_BITMASK(0,2)
 #define   NPU2_MEM_BAR_GROUP			PPC_BITMASK(3,6)
 #define   NPU2_MEM_BAR_CHIP			PPC_BITMASK(7,9)
-- 
1.8.3.1



More information about the Skiboot mailing list