[Skiboot] [PATCH V4 5/5] NX: Describe device-tree changes for P9 NX compression engines

Haren Myneni haren at linux.vnet.ibm.com
Tue Jul 18 12:51:48 AEST 2017

Describe device-tree entries needed for 842 and gzip compression
engines on P9 NX.

Signed-off-by: Haren Myneni <haren at us.ibm.com>
 doc/device-tree/nx.rst |   37 +++++++++++++++++++++++++++++++++----
 1 files changed, 33 insertions(+), 4 deletions(-)

diff --git a/doc/device-tree/nx.rst b/doc/device-tree/nx.rst
index 4c54d4b..1589be6 100644
--- a/doc/device-tree/nx.rst
+++ b/doc/device-tree/nx.rst
@@ -11,11 +11,11 @@ With unique xscom and nx addresses.  Their compatible node contains
-NX 842 Coprocessor
+NX Compression Coprocessor
-This is the memory compression coprocessor, which uses the IBM proprietary
-842 compression algorithm and format.  Each nx node contains an 842 engine.
+This is the memory compression coprocessor. which uses the IBM proprietary
+842 compression algorithm and format. Each NX node contains an 842 engine.
    ibm,842-coprocessor-type	: CT value common to all 842 coprocessors
@@ -29,6 +29,35 @@ all 842 coprocessors in the system, the CT value will (should) be the same,
 while each will have a different CI value.  The driver can use CI 0 to allow
 the hardware to automatically select which coprocessor instance to use.
+On P9, this compression coprocessor also supports standard GZIP/ZLIB
+compression algorithm and format. Virtual Accelerator Swirchboard (VAS) is used
+to access this coprocessor. VAS writes each request to receive FIFOs (RXFIFO)
+which are either high or normal priority  and these FIFOs are bound to
+coprocessor types (842 and gzip).
+VAS distinguishes NX requests for the target engines based on logical
+partition ID (lpid), process ID (pid) and Thread ID (tid). So (lpid, pid, tid)
+combination has to be unique in the system. Each NX node contains high and
+normal FIFOs for each  842 and GZIP engines.
+  /ibm,842-high-fifo		: High priority 842 RxFIFO
+  /ibm,842-normal-fifo		: Normal priority 842 RxFIFO
+  /ibm,gzip-high-fifo		: High priority gzip RxFIFO
+  /ibm,gzip-normal-fifo		: Normal priority gzip RxFIFO
+Each RxFIFO node contains: ::
+	compatible		: ibm,p9-nx-842 or ibm,p9-nx-gzip
+	priority		: High or Normal
+	rx-fifo-address		: RxFIFO buffer address
+	rx-fifo-size		: RxFIFO size
+	lpid			: 0xfff (1's for 12 bits in UMAC notify match
+				  register)
+	pid			: Coprocessor type (either 842 or gzip)
+	tid			: counter in each coprocessor type
+During initialization, the driver invokes VAS interface for each coprocessor
+type (842 and gzip) to configure the RxFIFO with rx_fifo_address, lpid, pid
+and tid for high and nornmal priority FIFOs.
 NX RNG Coprocessor

More information about the Skiboot mailing list