[Skiboot] [PATCH 2/3] Introduce NPU2 support

Alistair Popple alistair at popple.id.au
Thu Jan 12 16:11:23 AEDT 2017


NVLink2 is a new feature introduced on POWER9 systems. It is an
evolution of of the NVLink1 feature included in POWER8+ systems but
adds several new features including support for GPU address
translation using the Nest MMU and cache coherence.

Similar to NVLink1 the functionality is exposed to the OS as a series
of virtual PCIe devices. However the actual hardware interfaces are
significantly different which limits the amount of common code that
can be shared between implementations in the firmware.

This patch adds basic hardware initialisation and exposure of the
virtual NVLink2 PCIe devices to the running OS.

Signed-off-by: Alistair Popple <alistair at popple.id.au>
---
 core/init.c                |    1 +
 doc/device-tree/nvlink.rst |   27 +-
 doc/nvlink.rst             |   22 +-
 hw/Makefile.inc            |    2 +-
 hw/npu2.c                  | 1416 ++++++++++++++++++++++++++++++++++++++++++++
 include/npu2-regs.h        |    3 +
 include/npu2.h             |  141 +++++
 include/pci.h              |    1 +
 include/skiboot.h          |    1 +
 9 files changed, 1607 insertions(+), 7 deletions(-)
 create mode 100644 hw/npu2.c
 create mode 100644 include/npu2.h

diff --git a/core/init.c b/core/init.c
index 81939dd..1cba0ae 100644
--- a/core/init.c
+++ b/core/init.c
@@ -922,6 +922,7 @@ void __noreturn __nomcount main_cpu_entry(const void *fdt)
 
 	/* Probe NPUs */
 	probe_npu();
+	probe_npu2();
 
 	/* Initialize PCI */
 	pci_init_slots();
diff --git a/doc/device-tree/nvlink.rst b/doc/device-tree/nvlink.rst
index 8375dc4..712a8a9 100644
--- a/doc/device-tree/nvlink.rst
+++ b/doc/device-tree/nvlink.rst
@@ -66,6 +66,27 @@ NPU bindings:
     };
   };
 
+GPU memory bindings
+-------------------
+
+.. code-block:: dts
+
+        memory at 100000000 {
+                device_type = "memory"
+                compatible = "ibm,coherent-device-memory";
+                status = "disabled";
+
+        ; denotes a region of unplugged system memory
+
+                reg = <0x0 0x100000000 0x0 0x80000000>;
+                ibm,associativity = <0x4 0x0 0x0 0x0 0x64>;
+
+        ; numa associativity for the memory once it is hotplugged
+
+                phandle = <0x10000abc>;
+                linux,phandle = <0x10000abc>;
+        };
+
 Emulated PCI device bindings
 ----------------------------
 
@@ -83,7 +104,8 @@ Emulated PCI device bindings
                         ibm,pci-config-space-type = <0x1>;
                         vendor-id = <0x1014>;
                         ibm,gpu = <0x100002f7>; /* phandle pointing the associated GPU PCI device node */
-  	  	        phandle = <0x100002fc>;
+			memory-region = <0x10000abc>; /* phandle pointing to the GPU memory */
+			phandle = <0x100002fc>;
                 };
 
                 pci at 1 {
@@ -94,6 +116,7 @@ Emulated PCI device bindings
                         ibm,pci-config-space-type = <0x1>;
                         vendor-id = <0x1014>;
                         ibm,gpu = <0x100002f5>;
+                        memory-region = <0x10000def>;
                         phandle = <0x100002fe>;
                         class-code = <0x60400>;
                         linux,phandle = <0x100002fe>;
@@ -107,6 +130,7 @@ Emulated PCI device bindings
                         ibm,pci-config-space-type = <0x1>;
                         vendor-id = <0x1014>;
                         ibm,gpu = <0x100002f7>;
+                        memory-region = <0x10000abc>;
                         phandle = <0x100002fd>;
                         class-code = <0x60400>;
                         linux,phandle = <0x100002fd>;
@@ -120,6 +144,7 @@ Emulated PCI device bindings
                         ibm,pci-config-space-type = <0x1>;
                         vendor-id = <0x1014>;
                         ibm,gpu = <0x100002f5>;
+                        memory-region = <0x10000def>;
                         phandle = <0x100002ff>;
                         class-code = <0x60400>;
                         linux,phandle = <0x100002ff>;
diff --git a/doc/nvlink.rst b/doc/nvlink.rst
index d035968..cba64df 100644
--- a/doc/nvlink.rst
+++ b/doc/nvlink.rst
@@ -38,14 +38,15 @@ related to the setup of DMA windows.
 Configuration Space Parameters
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-============ =============== =====
-============ =============== =====
-Vendor ID    0x1014          (IBM)
+============ =================== =====
+============ =================== =====
+Vendor ID    0x1014              (IBM)
 Device ID    0x04ea
 Revision ID  0x00
-Class        0x068000        (Bridge Device Other, ProgIf = 0x0)
+Class        0x068000 / 0x068001 (Bridge Device Other, ProgIf = 0x0 / 0x1)
 BAR0/1       TL/DL Registers
-============ =============== =====
+BAR2/3       GEN-ID Registers    (Only for rev-id = 0x1)
+============ =================== =====
 
 TL/DL Registers
 ^^^^^^^^^^^^^^^
@@ -59,6 +60,17 @@ to 64-bit BAR#0 of the emulated PCI device configuration space. ::
       	     | DL (64K)  |
  BAR#0	     +-----------+
 
+Generation Registers (GEN-ID)
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+On POWER9 each link has 64K of generation ID registers for the relaxed
+ordering mode syncronisation. Refer to the programming guide for
+details of the register layout in this BAR.
+
+Relaxed ordering mode will be disabled by default as it requires
+device driver support. Device drivers will need to request relaxed
+ordering mode through some yet to be designed mechanism.
+
 Vendor Specific Capabilities
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 ::
diff --git a/hw/Makefile.inc b/hw/Makefile.inc
index f2dc328..1df5ce2 100644
--- a/hw/Makefile.inc
+++ b/hw/Makefile.inc
@@ -6,7 +6,7 @@ HW_OBJS += nx.o nx-rng.o nx-crypto.o nx-842.o
 HW_OBJS += p7ioc.o p7ioc-inits.o p7ioc-phb.o
 HW_OBJS += phb3.o sfc-ctrl.o fake-rtc.o bt.o p8-i2c.o prd.o
 HW_OBJS += dts.o lpc-rtc.o npu.o npu-hw-procedures.o xive.o phb4.o
-HW_OBJS += fake-nvram.o
+HW_OBJS += fake-nvram.o npu2.o
 HW=hw/built-in.o
 
 # FIXME hack this for now
diff --git a/hw/npu2.c b/hw/npu2.c
new file mode 100644
index 0000000..77b5203
--- /dev/null
+++ b/hw/npu2.c
@@ -0,0 +1,1416 @@
+/* Copyright 2013-2016 IBM Corp.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+ * implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include <skiboot.h>
+#include <io.h>
+#include <timebase.h>
+#include <pci-cfg.h>
+#include <pci.h>
+#include <pci-slot.h>
+#include <pci-virt.h>
+#include <interrupts.h>
+#include <opal.h>
+#include <opal-api.h>
+#include <cpu.h>
+#include <device.h>
+#include <ccan/str/str.h>
+#include <ccan/array_size/array_size.h>
+#include <affinity.h>
+#include <npu2-regs.h>
+#include <npu2.h>
+#include <lock.h>
+#include <xscom.h>
+#include <bitutils.h>
+#include <chip.h>
+
+/*
+ * NPU2 BAR layout definition. We have 3 stacks and each of them
+ * contains 2 bricks. So every NPU2 has 6 bricks in total. There are 2
+ * PHY BARs and each of them is shared by 3 bricks. Every brick has
+ * one NTL BAR and two bricks share one GENID BAR. There is also a
+ * global MMIO BAR. We only expose DL and GENID BARs to the OS and all
+ * other BARs will be hidden in skiboot.
+ *
+ * Before the global MMIO BAR is configured, scom is the only way to
+ * access the BAR registers. At NPU2 PHB probing time, we rely on scom
+ * to assign all BARs until the global MMIO BAR is established.
+ *
+ * We need to access 4 SM registers in the same stack in order to
+ * configure one particular BAR.
+ */
+#define NPU2_DEFINE_BAR(t, n, s)					\
+	{ .flags         = 0,						\
+	  .type          = t,						\
+	  .reg           = NPU2_##n,					\
+	  .stack         = s,						\
+	  .base	         = 0ul,						\
+	  .size          = 0ul,						\
+	}
+
+#define VENDOR_CAP_START          0x80
+#define VENDOR_CAP_END	          0x90
+
+#define VENDOR_CAP_PCI_DEV_OFFSET 0x0d
+
+static struct npu2_bar npu2_bars[] = {
+	NPU2_DEFINE_BAR(NPU2_BAR_TYPE_GLOBAL,   PHY_BAR,   NPU2_STACK_STCK_2),
+	NPU2_DEFINE_BAR(NPU2_BAR_TYPE_PHY,	PHY_BAR,   NPU2_STACK_STCK_0),
+	NPU2_DEFINE_BAR(NPU2_BAR_TYPE_PHY,	PHY_BAR,   NPU2_STACK_STCK_1),
+	NPU2_DEFINE_BAR(NPU2_BAR_TYPE_NTL,	NTL0_BAR,  NPU2_STACK_STCK_0),
+	NPU2_DEFINE_BAR(NPU2_BAR_TYPE_NTL,	NTL1_BAR,  NPU2_STACK_STCK_0),
+	NPU2_DEFINE_BAR(NPU2_BAR_TYPE_NTL,	NTL0_BAR,  NPU2_STACK_STCK_1),
+	NPU2_DEFINE_BAR(NPU2_BAR_TYPE_NTL,	NTL1_BAR,  NPU2_STACK_STCK_1),
+	NPU2_DEFINE_BAR(NPU2_BAR_TYPE_NTL,	NTL0_BAR,  NPU2_STACK_STCK_2),
+	NPU2_DEFINE_BAR(NPU2_BAR_TYPE_NTL,	NTL1_BAR,  NPU2_STACK_STCK_2),
+	NPU2_DEFINE_BAR(NPU2_BAR_TYPE_GENID,	GENID_BAR, NPU2_STACK_STCK_0),
+	NPU2_DEFINE_BAR(NPU2_BAR_TYPE_GENID,	GENID_BAR, NPU2_STACK_STCK_1),
+	NPU2_DEFINE_BAR(NPU2_BAR_TYPE_GENID,	GENID_BAR, NPU2_STACK_STCK_2)
+};
+
+/*
+ * We use the indirect method because it uses the same addresses as
+ * the MMIO offsets (NPU RING)
+ */
+static void npu2_scom_set_addr(uint64_t gcid,
+			  uint64_t scom_base,
+			  uint64_t addr)
+{
+	addr = SETFIELD(NPU2_MISC_DA_ADDR, 0ul, addr);
+	addr = SETFIELD(NPU2_MISC_DA_LEN, addr, NPU2_MISC_DA_LEN_8B);
+
+	xscom_write(gcid, scom_base + NPU2_MISC_SCOM_IND_SCOM_ADDR, addr);
+}
+
+static void npu2_scom_write(uint64_t gcid,
+			    uint64_t scom_base,
+			    uint64_t reg,
+			    uint64_t val)
+{
+	npu2_scom_set_addr(gcid, scom_base, reg);
+	xscom_write(gcid, scom_base + NPU2_MISC_SCOM_IND_SCOM_DATA, val);
+}
+
+static uint64_t npu2_scom_read(uint64_t gcid,
+				    uint64_t scom_base,
+				    uint64_t reg)
+{
+	uint64_t val;
+
+	npu2_scom_set_addr(gcid, scom_base, reg);
+	xscom_read(gcid, scom_base + NPU2_MISC_SCOM_IND_SCOM_DATA, &val);
+
+	return val;
+}
+
+static void npu2_write(struct npu2 *p, uint64_t reg, uint64_t val)
+{
+	npu2_scom_write(p->chip_id, p->xscom_base, reg, val);
+}
+
+static uint64_t npu2_read(struct npu2 *p, uint64_t reg)
+{
+	return npu2_scom_read(p->chip_id, p->xscom_base, reg);
+}
+
+static inline void npu2_ioda_sel(struct npu2 *p, uint32_t table,
+				uint32_t index, bool autoinc)
+{
+	out_be64(p->regs + NPU2_ATS_IODA_TBL,
+		 (autoinc ? NPU2_ATS_IODA_TBL_AUTOINC : 0ul)	|
+		 SETFIELD(NPU2_ATS_IODA_TBL_SELECT, 0ul, table)	|
+		 SETFIELD(NPU2_ATS_IODA_TBL_INDEX,  0ul, index));
+}
+
+static struct npu2_dev *npu2_bdf_to_dev(struct npu2 *p,
+					uint32_t bdfn)
+{
+	struct pci_virt_device *pvd;
+
+	/* All emulated devices are attached to root bus */
+	if (bdfn & ~0xff)
+		return NULL;
+
+	pvd = pci_virt_find_device(&p->phb, bdfn);
+	if (pvd)
+		return pvd->data;
+
+	return NULL;
+}
+
+static void npu2_write_bar(struct npu2 *p,
+			   struct npu2_bar *bar,
+			   uint32_t gcid,
+			   uint32_t scom)
+{
+	uint64_t reg, val, enable = !!(bar->flags & NPU2_BAR_FLAG_ENABLED);
+	int block;
+
+	switch (bar->type) {
+	case NPU2_BAR_TYPE_GLOBAL:
+	case NPU2_BAR_TYPE_PHY:
+		val = SETFIELD(NPU2_PHY_BAR_ADDR, 0ul, bar->base >> 21);
+		val = SETFIELD(NPU2_PHY_BAR_ENABLE, val, enable);
+		break;
+	case NPU2_BAR_TYPE_NTL:
+		val = SETFIELD(NPU2_NTL_BAR_ADDR, 0ul, bar->base >> 17);
+		val = SETFIELD(NPU2_NTL_BAR_ENABLE, val, enable);
+		break;
+	case NPU2_BAR_TYPE_GENID:
+		val = SETFIELD(NPU2_GENID_BAR_ADDR, 0ul, bar->base >> 17);
+		val = SETFIELD(NPU2_GENID_BAR_ENABLE, val, enable);
+		break;
+	default:
+		val = 0ul;
+	}
+
+	for (block = NPU2_BLOCK_SM_0; block <= NPU2_BLOCK_SM_3; block++) {
+		reg = NPU2_REG_OFFSET(bar->stack, block, bar->reg);
+		if (p)
+			npu2_write(p, reg, val);
+		else
+			npu2_scom_write(gcid, scom, reg, val);
+	}
+}
+
+/* Trap for PCI command (0x4) to enable or disable device's BARs */
+static int64_t npu2_cfg_write_cmd(void *dev,
+				  struct pci_cfg_reg_filter *pcrf __unused,
+				  uint32_t offset, uint32_t size,
+				  uint32_t *data, bool write)
+{
+	struct pci_virt_device *pvd = dev;
+	struct npu2_dev *ndev = pvd->data;
+	struct npu2_bar *ntl_npu_bar, *genid_npu_bar;
+	bool enabled;
+
+	if (!write)
+		return OPAL_PARTIAL;
+
+	if (offset != PCI_CFG_CMD)
+		return OPAL_PARAMETER;
+	if (size != 1 && size != 2 && size != 4)
+		return OPAL_PARAMETER;
+
+	/*
+	 * Enable or disable NTL and GENID BAR. Two bricks share
+	 * one GENID BAR, which is exposed via the first brick.
+	 */
+	enabled = !!(*data & PCI_CFG_CMD_MEM_EN);
+	ntl_npu_bar = ndev->bars[0].npu2_bar;
+	genid_npu_bar = ndev->bars[1].npu2_bar;
+
+	ntl_npu_bar->flags = SETFIELD(NPU2_BAR_FLAG_ENABLED, ntl_npu_bar->flags, enabled);
+	npu2_write_bar(ndev->npu, ntl_npu_bar, 0, 0);
+
+	/*
+	 * Enable/disable the GENID BAR. Two bricks share one GENID
+	 * BAR which is exposed via the first brick so we need to
+	 * track the enables separately.
+	 */
+	if (ndev->index % 2)
+		genid_npu_bar->flags = SETFIELD(NPU2_BAR_FLAG_ENABLED1, genid_npu_bar->flags,
+						enabled);
+	else
+		genid_npu_bar->flags = SETFIELD(NPU2_BAR_FLAG_ENABLED0, genid_npu_bar->flags,
+						enabled);
+
+	/* Enable the BAR if either deivce requests it enabled, otherwise disable it */
+	genid_npu_bar->flags = SETFIELD(NPU2_BAR_FLAG_ENABLED, genid_npu_bar->flags,
+					!!(genid_npu_bar->flags & (NPU2_BAR_FLAG_ENABLED0 |
+								   NPU2_BAR_FLAG_ENABLED1)));
+	npu2_write_bar(ndev->npu, genid_npu_bar, 0, 0);
+
+	return OPAL_PARTIAL;
+}
+
+static int64_t npu2_cfg_read_bar(struct npu2_dev *dev __unused,
+				 struct pci_cfg_reg_filter *pcrf,
+				 uint32_t offset, uint32_t size,
+				 uint32_t *data)
+{
+	struct npu2_pcie_bar *bar = (struct npu2_pcie_bar *) pcrf->data;
+
+	if (!(bar->flags & NPU2_PCIE_BAR_FLAG_TRAPPED))
+		return OPAL_PARTIAL;
+
+	if ((size != 4) ||
+	    (offset != pcrf->start && offset != pcrf->start + 4))
+		return OPAL_PARAMETER;
+
+	if (bar->flags & NPU2_PCIE_BAR_FLAG_SIZE_HI)
+		*data = bar->size >> 32;
+	else
+		*data = bar->size;
+	bar->flags &= ~(NPU2_PCIE_BAR_FLAG_TRAPPED | NPU2_PCIE_BAR_FLAG_SIZE_HI);
+
+	return OPAL_SUCCESS;
+}
+
+static int64_t npu2_cfg_write_bar(struct npu2_dev *dev,
+				  struct pci_cfg_reg_filter *pcrf,
+				  uint32_t offset, uint32_t size,
+				  uint32_t data)
+{
+	struct pci_virt_device *pvd = dev->pvd;
+	struct npu2_pcie_bar *bar = (struct npu2_pcie_bar *) pcrf->data;
+	uint32_t pci_cmd;
+
+	if ((size != 4) ||
+	    (offset != pcrf->start && offset != pcrf->start + 4))
+		return OPAL_PARAMETER;
+
+	/* Return BAR size on next read */
+	if (data == 0xffffffff) {
+		bar->flags |= NPU2_PCIE_BAR_FLAG_TRAPPED;
+		if (offset == pcrf->start + 4)
+			bar->flags |= NPU2_PCIE_BAR_FLAG_SIZE_HI;
+
+		return OPAL_SUCCESS;
+	}
+
+	if (offset == pcrf->start) {
+		bar->base &= 0xffffffff00000000;
+		bar->base |= (data & 0xfffffff0);
+	} else {
+		bar->base &= 0x00000000ffffffff;
+		bar->base |= ((uint64_t)data << 32);
+
+		PCI_VIRT_CFG_NORMAL_RD(pvd, PCI_CFG_CMD, 4, &pci_cmd);
+
+		if (bar->npu2_bar->type == NPU2_BAR_TYPE_GENID && dev->index % 2)
+			bar->base -= 0x10000;
+
+		/* Only allow changing the base address if the BAR is not enabled */
+		if ((bar->npu2_bar->flags & NPU2_BAR_FLAG_ENABLED) &&
+		    (bar->npu2_bar->base != bar->base))
+			return OPAL_HARDWARE;
+
+		bar->npu2_bar->base = bar->base;
+		npu2_write_bar(dev->npu, bar->npu2_bar, 0, 0);
+	}
+
+	/* To update the config cache */
+	return OPAL_PARTIAL;
+}
+
+static int64_t npu2_dev_cfg_bar(void *dev, struct pci_cfg_reg_filter *pcrf,
+				uint32_t offset, uint32_t len, uint32_t *data,
+				bool write)
+{
+	struct pci_virt_device *pvd = dev;
+	struct npu2_dev *ndev = (struct npu2_dev *) pvd->data;
+
+	if (write)
+		return npu2_cfg_write_bar(ndev, pcrf, offset, len, *data);
+
+	return npu2_cfg_read_bar(ndev, pcrf, offset, len, data);
+}
+
+#define NPU2_CFG_READ(size, type)					\
+static int64_t npu2_cfg_read##size(struct phb *phb, uint32_t bdfn,	\
+				   uint32_t offset, type *data)		\
+{									\
+	uint32_t val;							\
+	int64_t ret;							\
+									\
+	ret = pci_virt_cfg_read(phb, bdfn, offset,			\
+				sizeof(*data), &val);			\
+	*data = (type)val;						\
+        return ret;							\
+}
+#define NPU2_CFG_WRITE(size, type)					\
+static int64_t npu2_cfg_write##size(struct phb *phb, uint32_t bdfn,	\
+				    uint32_t offset, type data)		\
+{									\
+	uint32_t val = data;						\
+	int64_t ret;							\
+									\
+	ret = pci_virt_cfg_write(phb, bdfn, offset,			\
+				 sizeof(data), val);			\
+	return ret;							\
+}
+
+NPU2_CFG_READ(8, u8);
+NPU2_CFG_READ(16, u16);
+NPU2_CFG_READ(32, u32);
+NPU2_CFG_WRITE(8, u8);
+NPU2_CFG_WRITE(16, u16);
+NPU2_CFG_WRITE(32, u32);
+
+static int __npu2_dev_bind_pci_dev(struct phb *phb __unused,
+				  struct pci_device *pd,
+				  void *data)
+{
+	struct npu2_dev *dev = data;
+	struct dt_node *pci_dt_node;
+	char *pcislot;
+
+	/* Ignore non-nvidia PCI devices */
+	if ((pd->vdid & 0xffff) != 0x10de)
+		return 0;
+
+	/* Find the PCI device's slot location */
+	for (pci_dt_node = pd->dn;
+	     pci_dt_node && !dt_find_property(pci_dt_node, "ibm,slot-label");
+	     pci_dt_node = pci_dt_node->parent);
+
+	if (!pci_dt_node)
+		return 0;
+
+	pcislot = (char *)dt_prop_get(pci_dt_node, "ibm,slot-label");
+
+	prlog(PR_DEBUG, "NPU: comparing GPU %s and NPU %s\n",
+	      pcislot, dev->slot_label);
+
+	if (streq(pcislot, dev->slot_label))
+		return 1;
+
+	return 0;
+}
+
+static void npu2_dev_bind_pci_dev(struct npu2_dev *dev)
+{
+	struct phb *phb;
+	uint32_t i;
+
+	if (dev->pd)
+		return;
+
+	for (i = 0; i < 64; i++) {
+		if (dev->npu->phb.opal_id == i)
+			continue;
+
+		phb = pci_get_phb(i);
+		if (!phb)
+			continue;
+
+		dev->pd = pci_walk_dev(phb, NULL, __npu2_dev_bind_pci_dev, dev);
+		if (dev->pd) {
+			dev->phb = phb;
+			/* Found the device, set the bit in config space */
+			PCI_VIRT_CFG_INIT_RO(dev->pvd, VENDOR_CAP_START +
+				VENDOR_CAP_PCI_DEV_OFFSET, 1, 0x01);
+			return;
+		}
+	}
+
+	prlog(PR_INFO, "%s: No PCI device for NPU device %04x:00:%02x.0 to bind to. If you expect a GPU to be there, this is a problem.\n",
+	      __func__, dev->npu->phb.opal_id, dev->index);
+}
+
+static struct lock pci_npu_phandle_lock = LOCK_UNLOCKED;
+
+static void npu2_append_phandle(struct dt_node *dn,
+				u32 phandle)
+{
+	struct dt_property *prop;
+	uint32_t *npu_phandles;
+	size_t len;
+
+	/*
+	 * Use a lock to make sure no one else has a reference to an
+	 * ibm,npu property (this assumes this is the only function
+	 * that holds a reference to it)
+	 */
+	lock(&pci_npu_phandle_lock);
+
+	/* This function shouldn't be called unless ibm,npu exists */
+	prop = (struct dt_property *)dt_require_property(dn, "ibm,npu", -1);
+
+	/* Need to append to the properties */
+	len = prop->len + sizeof(*npu_phandles);
+	dt_resize_property(&prop, len);
+	prop->len = len;
+
+	npu_phandles = (uint32_t *)prop->prop;
+	npu_phandles[len / sizeof(*npu_phandles) - 1] = phandle;
+	unlock(&pci_npu_phandle_lock);
+}
+
+static int npu2_dn_fixup(struct phb *phb,
+			 struct pci_device *pd,
+			 void *data __unused)
+{
+	struct npu2 *p = phb_to_npu2(phb);
+	struct npu2_dev *dev;
+
+	dev = npu2_bdf_to_dev(p, pd->bdfn);
+	assert(dev);
+	if (dev->phb || dev->pd)
+		return 0;
+
+	/* NPU devices require a slot location to associate with GPUs */
+	dev->slot_label = dt_prop_get_def(pd->dn, "ibm,slot-label", NULL);
+	if (!dev->slot_label) {
+		/**
+		 * @fwts-label NPUNoPHBSlotLabel
+		 * @fwts-advice No GPU/NPU slot information was found.
+		 * NVLink2 functionality will not work.
+		 */
+		prlog(PR_ERR, "NPU: Cannot find GPU slot information\n");
+		return 0;
+	}
+
+	/*
+	 * Bind the emulated PCI device with the real one, which can't
+	 * be done until the PCI devices are populated. Once the real
+	 * PCI device is identified, we also need fix the device-tree
+	 * for it
+	 */
+	npu2_dev_bind_pci_dev(dev);
+	if (dev->phb && dev->pd && dev->pd->dn) {
+		if (dt_find_property(dev->pd->dn, "ibm,npu"))
+			npu2_append_phandle(dev->pd->dn, pd->dn->phandle);
+		else
+			dt_add_property_cells(dev->pd->dn, "ibm,npu", pd->dn->phandle);
+
+		dt_add_property_cells(pd->dn, "ibm,gpu", dev->pd->dn->phandle);
+		dev->gpu_bdfn = dev->pd->bdfn;
+	}
+
+	return 0;
+}
+
+static void npu2_phb_final_fixup(struct phb *phb)
+{
+	pci_walk_dev(phb, NULL, npu2_dn_fixup, NULL);
+}
+
+static void npu2_init_ioda_cache(struct npu2 *p)
+{
+	uint64_t val[2];
+	uint32_t i;
+
+	/*
+	 * PE mapping: there are two sets of registers. One of them
+	 * is used to map PEs for transactions. Another set is used
+	 * for error routing. We should have consistent setting in
+	 * both of them. Note that each brick can support 3 PEs at
+	 * the maximal degree. For now, we just support one PE per
+	 * brick.
+	 */
+	val[0] = NPU2_CQ_BRICK_BDF2PE_MAP_ENABLE;
+	val[0] = SETFIELD(NPU2_CQ_BRICK_BDF2PE_MAP_PE,
+			  val[0], NPU2_RESERVED_PE_NUM);
+	val[1] = NPU2_MISC_BRICK_BDF2PE_MAP_ENABLE;
+	val[1] = SETFIELD(NPU2_MISC_BRICK_BDF2PE_MAP_PE,
+			  val[1], NPU2_RESERVED_PE_NUM);
+	for (i = 0; i < ARRAY_SIZE(p->bdf2pe_cache); i++) {
+		if (i < ARRAY_SIZE(p->bdf2pe_cache))
+			p->bdf2pe_cache[i] = SETFIELD(NPU2_CQ_BRICK_BDF2PE_MAP_BDF,
+						      val[0], i / 3);
+		else
+			p->bdf2pe_cache[i] = SETFIELD(NPU2_MISC_BRICK_BDF2PE_MAP_BDF,
+						      val[1], i / 3);
+
+		if (i % 3)
+			p->bdf2pe_cache[i] = 0ul;
+	}
+
+	/* TVT */
+	memset(p->tve_cache, 0, sizeof(p->tve_cache));
+}
+
+static int64_t npu2_ioda_reset(struct phb *phb, bool purge)
+{
+	struct npu2 *p = phb_to_npu2(phb);
+	uint32_t i;
+
+	if (purge) {
+		NPU2DBG(p, "Purging all IODA tables...\n");
+		npu2_init_ioda_cache(p);
+	}
+
+	/* TVT */
+	npu2_ioda_sel(p, NPU2_ATS_IODA_TBL_TVT, 0, true);
+	for (i = 0; i < ARRAY_SIZE(p->tve_cache); i++)
+		out_be64(p->regs + NPU2_ATS_IODA_DATA, p->tve_cache[i]);
+
+	return OPAL_SUCCESS;
+}
+
+static void npu2_hw_init(struct npu2 *p)
+{
+	uint64_t val;
+
+	npu2_ioda_reset(&p->phb, false);
+
+	/* Enable XTS retry mode */
+	val = npu2_read(p, NPU2_XTS_CFG);
+	npu2_write(p, NPU2_XTS_CFG, val | NPU2_XTS_CFG_TRY_ATR_RO);
+}
+
+static int64_t npu2_map_pe_dma_window_real(struct phb *phb,
+					   uint64_t pe_num,
+					   uint16_t window_id,
+					   uint64_t pci_start_addr,
+					   uint64_t pci_mem_size)
+{
+	struct npu2 *p = phb_to_npu2(phb);
+	uint64_t end;
+	uint64_t tve;
+
+	/* Sanity check. Each PE has one corresponding TVE */
+	if (pe_num >= NPU2_MAX_PE_NUM ||
+	    window_id != pe_num)
+		return OPAL_PARAMETER;
+
+	if (pci_mem_size) {
+		/* Enable */
+
+		end = pci_start_addr + pci_mem_size;
+
+		/* We have to be 16M aligned */
+		if ((pci_start_addr & 0x00ffffff) ||
+		    (pci_mem_size & 0x00ffffff))
+			return OPAL_PARAMETER;
+
+		/*
+		 * It *looks* like this is the max we can support (we need
+		 * to verify this. Also we are not checking for rollover,
+		 * but then we aren't trying too hard to protect ourselves
+		 * againt a completely broken OS.
+		 */
+		if (end > 0x0003ffffffffffffull)
+			return OPAL_PARAMETER;
+
+		/*
+		 * Put start address bits 49:24 into TVE[52:53]||[0:23]
+		 * and end address bits 49:24 into TVE[54:55]||[24:47]
+		 * and set TVE[51]
+		 */
+		tve  = (pci_start_addr << 16) & (0xffffffull << 48);
+		tve |= (pci_start_addr >> 38) & (3ull << 10);
+		tve |= (end >>  8) & (0xfffffful << 16);
+		tve |= (end >> 40) & (3ull << 8);
+		tve |= PPC_BIT(51);
+	} else {
+		/* Disable */
+		tve = 0;
+	}
+
+	npu2_ioda_sel(p, NPU2_ATS_IODA_TBL_TVT, window_id, false);
+	out_be64(p->regs + NPU2_ATS_IODA_DATA, tve);
+	p->tve_cache[window_id] = tve;
+
+	return OPAL_SUCCESS;
+}
+
+static int64_t npu2_map_pe_dma_window(struct phb *phb,
+				      uint64_t pe_num,
+				      uint16_t window_id,
+				      uint16_t tce_levels,
+				      uint64_t tce_table_addr,
+				      uint64_t tce_table_size,
+				      uint64_t tce_page_size)
+{
+	struct npu2 *p = phb_to_npu2(phb);
+	uint64_t tts_encoded;
+	uint64_t data64 = 0;
+
+	/* Sanity check. Each PE has one corresponding TVE */
+	if (pe_num >= NPU2_MAX_PE_NUM ||
+	    window_id != pe_num)
+		return OPAL_PARAMETER;
+
+	/*
+	 * Special condition, zero TCE table size used to disable
+	 * the TVE.
+	 */
+	if (!tce_table_size) {
+		npu2_ioda_sel(p, NPU2_ATS_IODA_TBL_TVT, window_id, false);
+		out_be64(p->regs + NPU2_ATS_IODA_DATA, 0ul);
+		p->tve_cache[window_id] = 0ul;
+		return OPAL_SUCCESS;
+	}
+
+	/* Additional arguments validation */
+	if (tce_levels < 1 ||
+	    tce_levels > 4 ||
+	    !is_pow2(tce_table_size) ||
+	    tce_table_size < 0x1000)
+		return OPAL_PARAMETER;
+
+	/* TCE table size */
+	data64 = SETFIELD(NPU2_ATS_IODA_TBL_TVT_TTA, 0ul, tce_table_addr >> 12);
+	tts_encoded = ilog2(tce_table_size) - 11;
+	if (tts_encoded > 39)
+		return OPAL_PARAMETER;
+	data64 = SETFIELD(NPU2_ATS_IODA_TBL_TVT_SIZE, data64, tts_encoded);
+
+	/* TCE page size */
+	switch (tce_page_size) {
+	case 0x10000:		/* 64K */
+		data64 = SETFIELD(NPU2_ATS_IODA_TBL_TVT_PSIZE, data64, 5);
+		break;
+	case 0x1000000:		/* 16M */
+		data64 = SETFIELD(NPU2_ATS_IODA_TBL_TVT_PSIZE, data64, 13);
+		break;
+	case 0x10000000:	/* 256M */
+		data64 = SETFIELD(NPU2_ATS_IODA_TBL_TVT_PSIZE, data64, 17);
+		break;
+	case 0x1000:		/* 4K */
+	default:
+		data64 = SETFIELD(NPU2_ATS_IODA_TBL_TVT_PSIZE, data64, 1);
+	}
+
+	/* Number of levels */
+	data64 = SETFIELD(NPU2_ATS_IODA_TBL_TVT_LEVEL, data64, tce_levels - 1);
+
+	/* Update to hardware */
+	npu2_ioda_sel(p, NPU2_ATS_IODA_TBL_TVT, window_id, false);
+	out_be64(p->regs + NPU2_ATS_IODA_DATA, data64);
+	p->tve_cache[window_id] = data64;
+
+	return OPAL_SUCCESS;
+}
+
+static int64_t npu2_set_pe(struct phb *phb,
+			   uint64_t pe_num,
+			   uint64_t bdfn,
+			   uint8_t bcompare,
+			   uint8_t dcompare,
+			   uint8_t fcompare,
+			   uint8_t action)
+{
+	struct npu2 *p = phb_to_npu2(phb);
+	struct npu2_dev *dev;
+	uint64_t reg, val;
+	int i, index = -1;
+
+	/* Sanity check */
+	if (action != OPAL_MAP_PE && action != OPAL_UNMAP_PE)
+		return OPAL_PARAMETER;
+	if (pe_num >= NPU2_MAX_PE_NUM)
+		return OPAL_PARAMETER;
+	if (bdfn >> 8)
+		return OPAL_PARAMETER;
+	if (bcompare != OpalPciBusAll ||
+	    dcompare != OPAL_COMPARE_RID_DEVICE_NUMBER ||
+	    fcompare != OPAL_COMPARE_RID_FUNCTION_NUMBER)
+		return OPAL_UNSUPPORTED;
+
+	/* Get the NPU2 device */
+	dev = npu2_bdf_to_dev(p, bdfn);
+	if (!dev)
+		return OPAL_PARAMETER;
+
+	/* Check if the PE number has been used or not */
+	for (i = 0; i < ARRAY_SIZE(p->bdf2pe_cache) / 2; i++) {
+		val = p->bdf2pe_cache[i];
+		if (!(val & NPU2_CQ_BRICK_BDF2PE_MAP_ENABLE)) {
+			if (index < 0 &&
+			    i >= dev->index * 3 &&
+			    i < (dev->index + 1) * 3)
+				index = i;
+			continue;
+		}
+
+		if (val & NPU2_CQ_BRICK_BDF2PE_MAP_WILDCARD)
+			return OPAL_PARAMETER;
+
+		if (GETFIELD(NPU2_CQ_BRICK_BDF2PE_MAP_PE, val) != pe_num)
+			continue;
+		if (GETFIELD(NPU2_CQ_BRICK_BDF2PE_MAP_BDF, val) != dev->gpu_bdfn)
+			return OPAL_RESOURCE;
+		else
+			return OPAL_BUSY;
+	}
+
+	val = NPU2_CQ_BRICK_BDF2PE_MAP_ENABLE;
+	val = SETFIELD(NPU2_CQ_BRICK_BDF2PE_MAP_PE, val, pe_num);
+	val = SETFIELD(NPU2_CQ_BRICK_BDF2PE_MAP_BDF, val, dev->gpu_bdfn);
+
+	if (!(index % 2))
+		reg = NPU2_REG_OFFSET(NPU2_STACK_STCK_0 + index/2,
+				      NPU2_BLOCK_CTL, NPU2_CQ_BRICK0_BDF2PE_MAP0);
+	else
+		reg = NPU2_REG_OFFSET(NPU2_STACK_STCK_0 + index/2,
+				      NPU2_BLOCK_CTL, NPU2_CQ_BRICK1_BDF2PE_MAP0);
+	p->bdf2pe_cache[i] = val;
+	npu2_write(p, reg, val);
+	val = NPU2_MISC_BRICK_BDF2PE_MAP_ENABLE;
+	val = SETFIELD(NPU2_MISC_BRICK_BDF2PE_MAP_PE, val, pe_num);
+	val = SETFIELD(NPU2_MISC_BRICK_BDF2PE_MAP_BDF, val, dev->gpu_bdfn);
+
+	reg = NPU2_REG_OFFSET(NPU2_STACK_MISC, NPU2_BLOCK_MISC,
+			      NPU2_MISC_BRICK0_BDF2PE_MAP0 + (index * 8));
+	p->bdf2pe_cache[index + 18] = val;
+	npu2_write(p, reg, val);
+
+	return OPAL_SUCCESS;
+}
+
+static int64_t npu2_get_link_state(struct pci_slot *slot __unused, uint8_t *val)
+{
+	/*
+	 * As we're emulating all PCI stuff, the link bandwidth
+	 * isn't big deal anyway.
+	 */
+	*val = OPAL_SHPC_LINK_UP_x1;
+	return OPAL_SUCCESS;
+}
+
+static int64_t npu2_get_power_state(struct pci_slot *slot __unused, uint8_t *val)
+{
+	*val = PCI_SLOT_POWER_ON;
+	return OPAL_SUCCESS;
+}
+
+static int64_t npu2_hreset(struct pci_slot *slot __unused)
+{
+	return OPAL_SUCCESS;
+}
+
+static int64_t npu2_freset(struct pci_slot *slot __unused)
+{
+	return OPAL_SUCCESS;
+}
+
+static struct pci_slot *npu2_slot_create(struct phb *phb)
+{
+	struct pci_slot *slot;
+
+	slot = pci_slot_alloc(phb, NULL);
+	if (!slot)
+		return slot;
+
+	/* Elementary functions */
+	slot->ops.get_presence_state  = NULL;
+	slot->ops.get_link_state      = npu2_get_link_state;
+	slot->ops.get_power_state     = npu2_get_power_state;
+	slot->ops.get_attention_state = NULL;
+	slot->ops.get_latch_state     = NULL;
+	slot->ops.set_power_state     = NULL;
+	slot->ops.set_attention_state = NULL;
+
+	slot->ops.prepare_link_change = NULL;
+	slot->ops.poll_link           = NULL;
+	slot->ops.hreset              = npu2_hreset;
+	slot->ops.freset              = npu2_freset;
+	slot->ops.creset              = NULL;
+
+	return slot;
+}
+
+static int64_t npu2_freeze_status(struct phb *phb __unused,
+				  uint64_t pe_number __unused,
+				  uint8_t *freeze_state,
+				  uint16_t *pci_error_type __unused,
+				  uint16_t *severity __unused,
+				  uint64_t *phb_status __unused)
+{
+	/*
+	 * FIXME: When it's called by skiboot PCI config accessor,
+	 * the PE number is fixed to 0, which is incorrect. We need
+	 * introduce another PHB callback to translate it. For now,
+	 * it keeps the skiboot PCI enumeration going.
+	 */
+	*freeze_state = OPAL_EEH_STOPPED_NOT_FROZEN;
+	return OPAL_SUCCESS;
+}
+
+static int64_t npu2_tce_kill(struct phb *phb, uint32_t kill_type,
+			     uint64_t pe_number, uint32_t tce_size,
+			     uint64_t dma_addr, uint32_t npages)
+{
+	struct npu2 *npu = phb_to_npu2(phb);
+	uint32_t tce_page_size;
+	uint64_t val;
+
+	if (pe_number > NPU2_MAX_PE_NUM)
+		return OPAL_PARAMETER;
+
+	sync();
+	switch(kill_type) {
+	case OPAL_PCI_TCE_KILL_PAGES:
+		tce_page_size = GETFIELD(npu->tve_cache[pe_number], NPU2_ATS_IODA_TBL_TVT_PSIZE);
+		if (tce_page_size != tce_size) {
+			NPU2ERR(npu, "npu2_tce_kill: Unexpected TCE size (got 0x%x expected 0x%x)\n",
+				tce_size, tce_page_size);
+			return OPAL_PARAMETER;
+		}
+
+		while (npages--) {
+			val = SETFIELD(NPU2_ATS_TCE_KILL_PENUM, dma_addr, pe_number);
+			npu2_write(npu, NPU2_ATS_TCE_KILL, NPU2_ATS_TCE_KILL_ONE | val);
+		}
+		break;
+	case OPAL_PCI_TCE_KILL_PE:
+		/*
+		 * NPU2 doesn't support killing a PE so fall through
+		 * and do a kill all instead.
+		 */
+	case OPAL_PCI_TCE_KILL:
+		npu2_write(npu, NPU2_ATS_TCE_KILL, NPU2_ATS_TCE_KILL_ALL);
+		break;
+	default:
+		return OPAL_PARAMETER;
+	}
+
+	return OPAL_SUCCESS;
+}
+
+static const struct phb_ops npu_ops = {
+	.cfg_read8		= npu2_cfg_read8,
+	.cfg_read16		= npu2_cfg_read16,
+	.cfg_read32		= npu2_cfg_read32,
+	.cfg_write8		= npu2_cfg_write8,
+	.cfg_write16		= npu2_cfg_write16,
+	.cfg_write32		= npu2_cfg_write32,
+	.choose_bus		= NULL,
+	.device_init		= NULL,
+	.phb_final_fixup	= npu2_phb_final_fixup,
+	.ioda_reset		= npu2_ioda_reset,
+	.papr_errinjct_reset	= NULL,
+	.pci_reinit		= NULL,
+	.set_phb_mem_window	= NULL,
+	.phb_mmio_enable	= NULL,
+	.map_pe_mmio_window	= NULL,
+	.map_pe_dma_window	= npu2_map_pe_dma_window,
+	.map_pe_dma_window_real	= npu2_map_pe_dma_window_real,
+	.pci_msi_eoi		= NULL,
+	.set_xive_pe		= NULL,
+	.get_msi_32		= NULL,
+	.get_msi_64		= NULL,
+	.set_pe			= npu2_set_pe,
+	.set_peltv		= NULL,
+	.eeh_freeze_status	= npu2_freeze_status,
+	.eeh_freeze_clear	= NULL,
+	.eeh_freeze_set		= NULL,
+	.next_error		= NULL,
+	.err_inject		= NULL,
+	.get_diag_data		= NULL,
+	.get_diag_data2		= NULL,
+	.set_capi_mode		= NULL,
+	.set_capp_recovery	= NULL,
+	.tce_kill		= npu2_tce_kill,
+};
+
+static void assign_mmio_bars(uint32_t gcid,
+			     uint32_t scom)
+{
+	uint64_t mem_start;
+	struct npu2_bar *bar;
+	uint32_t i;
+
+	mem_start = 0x6030200000000;
+	mem_start |= gcid * PPC_BIT(21);
+
+	/*
+	 * We're going to assign the BARs in reversed order according
+	 * to their sizes, just like the order we have in npu_bars[].
+	 * In that way, all BARs will be aligned perfectly without
+	 * wasting resources. Also, the Linux kernel won't change
+	 * anything though it attempts to reassign the BARs that
+	 * it can see, which are NTL and GENID BARs.
+	 *
+	 * GLOBAL MMIO (16MB)
+	 *        PHY0 (2MB)
+	 *        PHB1 (2MB)
+	 *        NTL0 (128KB)
+	 *        NTL1 (128KB)
+	 *        NTL2 (128KB)
+	 *        NTL3 (128KB)
+	 *        NTL4 (128KB)
+	 *        NTL5 (128KB)
+	 *      GENID0 (128KB)
+	 *      GENID1 (128KB)
+	 *      GENID2 (128KB)
+	 */
+	for (i = 0; i < ARRAY_SIZE(npu2_bars); i++) {
+		bar = &npu2_bars[i];
+		switch (bar->type) {
+		case NPU2_BAR_TYPE_GLOBAL:
+			bar->flags |= NPU2_BAR_FLAG_ENABLED;
+			bar->size = 0x1000000;
+			break;
+		case NPU2_BAR_TYPE_PHY:
+			bar->flags |= NPU2_BAR_FLAG_ENABLED;
+			bar->size = 0x200000;
+			break;
+		case NPU2_BAR_TYPE_NTL:
+			bar->flags &= ~NPU2_BAR_FLAG_ENABLED;
+			bar->size = 0x20000;
+			break;
+		case NPU2_BAR_TYPE_GENID:
+			bar->flags &= ~NPU2_BAR_FLAG_ENABLED;
+			bar->size = 0x20000;
+			break;
+		default:
+			bar->size = 0ul;
+		}
+
+		bar->base = mem_start;
+		mem_start += bar->size;
+		npu2_write_bar(NULL, bar, gcid, scom);
+	}
+}
+
+/*
+ *Probe NPU device node and create PCI root device node
+ * accordingly. The NPU deivce node should specify number
+ * of links and xscom base address to access links.
+ */
+static void npu2_probe_phb(struct dt_node *dn)
+{
+	struct dt_node *np;
+	uint32_t gcid, scom, index, phb_index, links;
+	uint64_t reg[2], mm_win[2];
+	char *path;
+
+	/* Retrieve chip id */
+	path = dt_get_path(dn);
+	gcid = dt_get_chip_id(dn);
+	index = dt_prop_get_u32(dn, "ibm,npu-index");
+	phb_index = dt_prop_get_u32(dn, "ibm,phb-index");
+	links = dt_prop_get_u32(dn, "ibm,npu-links");
+	prlog(PR_INFO, "Chip %d Found NPU%d (%d links) at %s\n",
+	      gcid, index, links, path);
+	free(path);
+
+	/* Retrieve scom base address */
+	scom = dt_get_address(dn, 0, NULL);
+	prlog(PR_INFO, "   SCOM Base:  %08x\n", scom);
+
+	/* Reassign the BARs */
+	assign_mmio_bars(gcid, scom);
+
+	/* Global MMIO BAR */
+	reg[0] = npu2_bars[0].base;
+	reg[1] = npu2_bars[0].size;
+	if (reg[0] && reg[1])
+		prlog(PR_INFO, "   Global MMIO BAR:  %016llx (%lldMB)\n",
+		      reg[0], reg[1] >> 20);
+	else
+		prlog(PR_ERR, "    Global MMIO BAR: Disabled\n");
+
+	/* NTL and GENID BARs are exposed to kernel */
+	mm_win[0] = npu2_bars[3].base;
+	mm_win[1] = npu2_bars[ARRAY_SIZE(npu2_bars) - 1].base +
+		    npu2_bars[ARRAY_SIZE(npu2_bars) - 1].size -
+		    mm_win[0];
+
+	/* Populate PCI root device node */
+	np = dt_new_addr(dt_root, "pciex", reg[0]);
+	assert(np);
+	dt_add_property_strings(np,
+				"compatible",
+				"ibm,power9-npu-pciex",
+				"ibm,ioda2-npu2-phb");
+	dt_add_property_strings(np, "device_type", "pciex");
+	dt_add_property(np, "reg", reg, sizeof(reg));
+	dt_add_property_cells(np, "ibm,phb-index", phb_index);
+	dt_add_property_cells(np, "ibm,npu-index", index);
+	dt_add_property_cells(np, "ibm,chip-id", gcid);
+	dt_add_property_cells(np, "ibm,xscom-base", scom);
+	dt_add_property_cells(np, "ibm,npcq", dn->phandle);
+	dt_add_property_cells(np, "ibm,links", links);
+	dt_add_property(np, "ibm,mmio-window", mm_win, sizeof(mm_win));
+}
+
+static uint32_t npu2_populate_pcie_cap(struct npu2_dev *dev,
+				       uint32_t start,
+				       uint32_t prev_cap)
+{
+	struct pci_virt_device *pvd = dev->pvd;
+	uint32_t val;
+
+	/* Add capability list */
+	PCI_VIRT_CFG_INIT_RO(pvd, prev_cap, 1, start);
+	PCI_VIRT_CFG_INIT_RO(pvd, start, 1, PCI_CFG_CAP_ID_EXP);
+
+	/* 0x00 - ID/PCIE capability */
+	val = PCI_CFG_CAP_ID_EXP;
+	val |= ((0x2 << 16) | (PCIE_TYPE_ENDPOINT << 20));
+	PCI_VIRT_CFG_INIT_RO(pvd, start, 4, val);
+
+	/* 0x04 - Device capability
+	 *
+	 * We should support FLR. Oterwhsie, it might have
+	 * problem passing it through to userland via Linux
+	 * VFIO infrastructure
+	 */
+	val = ((PCIE_MPSS_128) |
+	       (PCIE_PHANTOM_NONE << 3) |
+	       (PCIE_L0SL_MAX_NO_LIMIT << 6) |
+	       (PCIE_L1L_MAX_NO_LIMIT << 9) |
+	       (PCICAP_EXP_DEVCAP_FUNC_RESET));
+	PCI_VIRT_CFG_INIT_RO(pvd, start + PCICAP_EXP_DEVCAP, 4, val);
+
+	/* 0x08 - Device control and status */
+	PCI_VIRT_CFG_INIT(pvd, start + PCICAP_EXP_DEVCTL, 4, 0x00002810,
+			  0xffff0000, 0x000f0000);
+
+	/* 0x0c - Link capability */
+	val = (PCIE_LSPEED_VECBIT_2 | (PCIE_LWIDTH_1X << 4));
+	PCI_VIRT_CFG_INIT_RO(pvd, start + PCICAP_EXP_LCAP, 4, val);
+
+	/* 0x10 - Link control and status */
+	PCI_VIRT_CFG_INIT(pvd, start + PCICAP_EXP_LCTL, 4, 0x00130000,
+			 0xfffff000, 0xc0000000);
+
+	/* 0x14 - Slot capability */
+	PCI_VIRT_CFG_INIT_RO(pvd, start + PCICAP_EXP_SLOTCAP, 4, 0x00000000);
+
+	/* 0x18 - Slot control and status */
+	PCI_VIRT_CFG_INIT_RO(pvd, start + PCICAP_EXP_SLOTCTL, 4, 0x00000000);
+
+	/* 0x1c - Root control and capability */
+	PCI_VIRT_CFG_INIT(pvd, start + PCICAP_EXP_RC, 4, 0x00000000,
+			  0xffffffe0, 0x00000000);
+
+	/* 0x20 - Root status */
+	PCI_VIRT_CFG_INIT(pvd, start + PCICAP_EXP_RSTAT, 4, 0x00000000,
+			 0xffffffff, 0x00010000);
+
+	/* 0x24 - Device capability 2 */
+	PCI_VIRT_CFG_INIT_RO(pvd, start + PCIECAP_EXP_DCAP2, 4, 0x00000000);
+
+	/* 0x28 - Device Control and status 2 */
+	PCI_VIRT_CFG_INIT(pvd, start + PCICAP_EXP_DCTL2, 4, 0x00070000,
+			 0xffff0000, 0x00000000);
+
+	/* 0x2c - Link capability 2 */
+	PCI_VIRT_CFG_INIT_RO(pvd, start + PCICAP_EXP_LCAP2, 4, 0x00000007);
+
+	/* 0x30 - Link control and status 2 */
+	PCI_VIRT_CFG_INIT(pvd, start + PCICAP_EXP_LCTL2, 4, 0x00000003,
+			 0xffff0000, 0x00200000);
+
+	/* 0x34 - Slot capability 2 */
+	PCI_VIRT_CFG_INIT_RO(pvd, start + PCICAP_EXP_SCAP2, 4, 0x00000000);
+
+	/* 0x38 - Slot control and status 2 */
+	PCI_VIRT_CFG_INIT_RO(pvd, start + PCICAP_EXP_SCTL2, 4, 0x00000000);
+
+	return start + PCICAP_EXP_SCTL2 + 4;
+}
+
+static int64_t npu2_hw_procedure(void *dev __unused, struct pci_cfg_reg_filter *pcrf __unused,
+				 uint32_t offset __unused, uint32_t len __unused,
+				 uint32_t *data __unused, bool write __unused)
+{
+	struct pci_virt_device *pvd = dev;
+	struct npu2_dev *ndev = pvd->data;
+
+	NPU2ERR(ndev->npu, "NPU2 PHY Hardware Procedures not implemented\n");
+
+	/*
+	 * Return OPAL_SUCCESS as the PHY may already have been
+	 * initialised externally (eg. via Cronus).
+	 */
+	return OPAL_SUCCESS;
+}
+
+static uint32_t npu2_populate_vendor_cap(struct npu2_dev *dev,
+					 uint32_t start,
+					 uint32_t prev_cap)
+{
+	struct pci_virt_device *pvd = dev->pvd;
+
+#define NPU2_VENDOR_CAP_VERSION	0x00
+#define NPU2_VENDOR_CAP_LEN	0x10
+
+	/* Capbility list */
+	PCI_VIRT_CFG_INIT_RO(pvd, prev_cap, 1, start);
+	PCI_VIRT_CFG_INIT_RO(pvd, start, 1, PCI_CFG_CAP_ID_VENDOR);
+	dev->vendor_cap = start;
+
+	/* Length and version */
+	PCI_VIRT_CFG_INIT_RO(pvd, start + 2, 1, NPU2_VENDOR_CAP_LEN);
+	PCI_VIRT_CFG_INIT_RO(pvd, start + 3, 1, NPU2_VENDOR_CAP_VERSION);
+
+	/*
+	 * Defaults when the trap can't handle the read/write (eg. due
+	 * to reading/writing less than 4 bytes).
+	 */
+	PCI_VIRT_CFG_INIT_RO(pvd, start + 4, 4, 0);
+	PCI_VIRT_CFG_INIT_RO(pvd, start + 8, 4, 0);
+
+	/* TODO: NVLink2 PHY procedures are unknown at this point in time. */
+	pci_virt_add_filter(pvd, start + 4, 8,
+			    PCI_REG_FLAG_READ | PCI_REG_FLAG_WRITE,
+			    npu2_hw_procedure,
+			    NULL);
+
+	/* Link index */
+	PCI_VIRT_CFG_INIT_RO(pvd, start + 0xc, 1, dev->index);
+
+	return start + NPU2_VENDOR_CAP_LEN;
+}
+
+static void npu2_populate_cfg(struct npu2_dev *dev)
+{
+	struct pci_virt_device *pvd = dev->pvd;
+	struct npu2_pcie_bar *bar;
+	uint32_t pos;
+
+	/* 0x00 - Vendor/Device ID */
+	PCI_VIRT_CFG_INIT_RO(pvd, PCI_CFG_VENDOR_ID, 4, 0x04ea1014);
+
+	/* 0x04 - Command/Status */
+	PCI_VIRT_CFG_INIT(pvd, PCI_CFG_CMD, 4, 0x00100000, 0xffb802b8,
+			  0xf9000000);
+
+	pci_virt_add_filter(pvd, PCI_CFG_CMD, 1, PCI_REG_FLAG_WRITE,
+			    npu2_cfg_write_cmd, NULL);
+
+	/* 0x08 - Rev/Class/Cache */
+	PCI_VIRT_CFG_INIT_RO(pvd, PCI_CFG_REV_ID, 4, 0x06800001);
+
+	/* 0x0c - CLS/Latency Timer/Header/BIST */
+	PCI_VIRT_CFG_INIT_RO(pvd, PCI_CFG_CACHE_LINE_SIZE, 4, 0x00800000);
+
+	/* 0x10/14 - BAR#0, NTL BAR */
+	bar = &dev->bars[0];
+	PCI_VIRT_CFG_INIT(pvd, PCI_CFG_BAR0, 4,
+			  (bar->base & 0xfffffff0) | (bar->flags & 0xF),
+			  0x0000000f, 0x00000000);
+	PCI_VIRT_CFG_INIT(pvd, PCI_CFG_BAR1, 4, (bar->base >> 32),
+			  0x00000000, 0x00000000);
+	pci_virt_add_filter(pvd, PCI_CFG_BAR0, 8,
+			    PCI_REG_FLAG_READ | PCI_REG_FLAG_WRITE,
+			    npu2_dev_cfg_bar, bar);
+
+	/* 0x18/1c - BAR#1, GENID BAR */
+	bar = &dev->bars[1];
+	PCI_VIRT_CFG_INIT(pvd, PCI_CFG_BAR2, 4, (bar->base & 0xfffffff0) |
+			  (bar->flags & 0xF),
+			  0x0000000f, 0x00000000);
+	PCI_VIRT_CFG_INIT(pvd, PCI_CFG_BAR3, 4, (bar->base >> 32), 0x00000000,
+			  0x00000000);
+	pci_virt_add_filter(pvd, PCI_CFG_BAR2, 8,
+			    PCI_REG_FLAG_READ | PCI_REG_FLAG_WRITE,
+			    npu2_dev_cfg_bar, bar);
+
+	/* 0x20/0x24 - BARs, disabled */
+	PCI_VIRT_CFG_INIT_RO(pvd, PCI_CFG_BAR4, 4, 0x00000000);
+	PCI_VIRT_CFG_INIT_RO(pvd, PCI_CFG_BAR5, 4, 0x00000000);
+
+	/* 0x28 - Cardbus CIS pointer */
+	PCI_VIRT_CFG_INIT_RO(pvd, PCI_CFG_CARDBUS_CIS, 4, 0x00000000);
+
+	/* 0x2c - Subsystem ID */
+	PCI_VIRT_CFG_INIT_RO(pvd, PCI_CFG_SUBSYS_VENDOR_ID, 4, 0x00000000);
+
+	/* 0x30 - ROM BAR, zero sized */
+	PCI_VIRT_CFG_INIT_RO(pvd, PCI_CFG_ROMBAR, 4, 0xffffffff);
+
+	/* 0x34 - PCI Capability */
+	PCI_VIRT_CFG_INIT_RO(pvd, PCI_CFG_CAP, 4, 0x00000000);
+
+	/* 0x38 - Reserved */
+	PCI_VIRT_CFG_INIT_RO(pvd, 0x38, 4, 0x00000000);
+
+	/* 0x3c - INT line/pin/Minimal grant/Maximal latency */
+	if (!(dev->index % 2))
+		PCI_VIRT_CFG_INIT_RO(pvd, PCI_CFG_INT_LINE, 4, 0x00000100);
+	else
+		PCI_VIRT_CFG_INIT_RO(pvd, PCI_CFG_INT_LINE, 4, 0x00000200);
+
+	/* PCIE and vendor specific capability */
+	pos = npu2_populate_pcie_cap(dev, 0x40, PCI_CFG_CAP);
+	npu2_populate_vendor_cap(dev, pos, 0x41);
+	PCI_VIRT_CFG_INIT_RO(pvd, pos + 1, 1, 0);
+}
+
+static uint32_t npu_allocate_bdfn(struct npu2 *p, uint32_t group)
+{
+	int i;
+	int bdfn = (group << 3);
+
+	for (i = 0; i < p->total_devices; i++) {
+		if ((p->devices[i].bdfn & 0xf8) == (bdfn & 0xf8))
+			bdfn++;
+	}
+
+	return bdfn;
+}
+
+static void npu2_populate_devices(struct npu2 *p,
+				  struct dt_node *dn)
+{
+	struct npu2_dev *dev;
+	struct dt_node *npu2_dn, *link;
+	uint32_t npu_phandle, index = 0;
+
+	/*
+	 * Get the npu node which has the links which we expand here
+	 * into pci like devices attached to our emulated phb.
+	 */
+	npu_phandle = dt_prop_get_u32(dn, "ibm,npcq");
+	npu2_dn = dt_find_by_phandle(dt_root, npu_phandle);
+	assert(npu2_dn);
+
+	/* Walk the link at x nodes to initialize devices */
+	p->total_devices = 0;
+	p->phb.scan_map = 0;
+	dt_for_each_compatible(npu2_dn, link, "ibm,npu-link") {
+		uint32_t group_id;
+
+		dev = &p->devices[index];
+		dev->npu = p;
+		dev->dt_node = link;
+		dev->index = dt_prop_get_u32(link, "ibm,npu-link-index");
+
+		group_id = dt_prop_get_u32(link, "ibm,npu-group-id");
+		dev->bdfn = npu_allocate_bdfn(p, group_id);
+
+		/* This must be done after calling
+		 * npu_allocate_bdfn() */
+		p->total_devices++;
+		p->phb.scan_map |= 0x1 << ((dev->bdfn & 0xf8) >> 3);
+
+		dev->lane_mask = dt_prop_get_u32(link, "ibm,npu-lane-mask");
+
+		/* Populate BARs. BAR0/1 is the NTL bar. */
+		dev->bars[0].npu2_bar = &npu2_bars[3 + dev->index];
+		dev->bars[0].base = dev->bars[0].npu2_bar->base;
+		dev->bars[0].size = dev->bars[0].npu2_bar->size;
+		dev->bars[0].flags = PCI_CFG_BAR_TYPE_MEM | PCI_CFG_BAR_MEM64;
+
+		/* BAR2/3 is the GENID bar. */
+		dev->bars[1].npu2_bar = &npu2_bars[9 + dev->index / 2];
+		dev->bars[1].base = dev->bars[1].npu2_bar->base + ((dev->index % 2) * 0x10000);
+		dev->bars[1].size = 0x10000;
+		dev->bars[1].flags = PCI_CFG_BAR_TYPE_MEM | PCI_CFG_BAR_MEM64;
+
+		/* Initialize PCI virtual device */
+		dev->pvd = pci_virt_add_device(&p->phb, dev->bdfn, 0x100, dev);
+		if (dev->pvd) {
+			p->phb.scan_map |=
+				0x1 << ((dev->pvd->bdfn & 0xf8) >> 3);
+			npu2_populate_cfg(dev);
+		}
+
+		index++;
+	}
+}
+
+static void npu2_add_phb_properties(struct npu2 *p)
+{
+	struct dt_node *np = p->phb.dt_node;
+	uint32_t icsp = get_ics_phandle();
+	uint64_t mm_base, mm_size, mmio_atsd;
+
+	/*
+	 * Add various properties that HB doesn't have to
+	 * add, some of them simply because they result from
+	 * policy decisions made in skiboot rather than in HB
+	 * such as the MMIO windows going to PCI, interrupts,
+	 * etc.
+	 */
+	dt_add_property_cells(np, "#address-cells", 3);
+	dt_add_property_cells(np, "#size-cells", 2);
+	dt_add_property_cells(np, "#interrupt-cells", 1);
+	dt_add_property_cells(np, "bus-range", 0, 0xff);
+	dt_add_property_cells(np, "clock-frequency", 0x200, 0);
+        dt_add_property_cells(np, "interrupt-parent", icsp);
+
+	/* NPU PHB properties */
+	dt_add_property_cells(np, "ibm,opal-num-pes",
+			      NPU2_MAX_PE_NUM);
+	dt_add_property_cells(np, "ibm,opal-reserved-pe",
+			      NPU2_RESERVED_PE_NUM);
+
+	mmio_atsd = (u64) p->regs +
+		NPU2_REG_OFFSET(NPU2_STACK_ATSD, NPU2_BLOCK_ATSD0, NPU2_XTS_MMIO_ATSD_LAUNCH);
+	dt_add_property_cells(np, "ibm,mmio-atsd", hi32(mmio_atsd),
+			      lo32(mmio_atsd));
+
+	/*
+	 * Memory window is exposed as 64-bits non-prefetchable
+	 * one because 64-bits prefetchable one is kind of special
+	 * to kernel.
+	 */
+	mm_base = p->mm_base;
+	mm_size = p->mm_size;
+	dt_add_property_cells(np, "ranges", 0x02000000,
+			      hi32(mm_base), lo32(mm_base),
+			      hi32(mm_base), lo32(mm_base),
+			      hi32(mm_size), lo32(mm_size));
+}
+
+static void npu2_create_phb(struct dt_node *dn)
+{
+	const struct dt_property *prop;
+	struct npu2 *p;
+	struct pci_slot *slot;
+	uint32_t links;
+	void *pmem;
+
+	/* Retrieve number of devices */
+	links = dt_prop_get_u32(dn, "ibm,links");
+	pmem = zalloc(sizeof(struct npu2) + links * sizeof(struct npu2_dev));
+	assert(pmem);
+
+	/* Populate PHB */
+	p = pmem;
+	p->index = dt_prop_get_u32(dn, "ibm,phb-index");
+	p->chip_id = dt_prop_get_u32(dn, "ibm,chip-id");
+	p->xscom_base = dt_prop_get_u32(dn, "ibm,xscom-base");
+	p->total_devices = links;
+
+	p->regs = (void *)dt_get_address(dn, 0, NULL);
+
+	prop = dt_require_property(dn, "ibm,mmio-window", -1);
+	assert(prop->len >= (2 * sizeof(uint64_t)));
+	p->mm_base = ((const uint64_t *)prop->prop)[0];
+	p->mm_size = ((const uint64_t *)prop->prop)[1];
+
+	p->devices = pmem + sizeof(struct npu2);
+
+	/* Generic PHB */
+	p->phb.dt_node = dn;
+	p->phb.ops = &npu_ops;
+	p->phb.phb_type = phb_type_npu_v2;
+	init_lock(&p->lock);
+	init_lock(&p->phb.lock);
+	list_head_init(&p->phb.devices);
+	list_head_init(&p->phb.virt_devices);
+
+	npu2_populate_devices(p, dn);
+	npu2_add_phb_properties(p);
+
+	slot = npu2_slot_create(&p->phb);
+	if (!slot)
+	{
+		/**
+		 * @fwts-label NPUCannotCreatePHBSlot
+		 * @fwts-advice Firmware probably ran out of memory creating
+		 * NPU slot. NVLink functionality could be broken.
+		 */
+		prlog(PR_ERR, "NPU: Cannot create PHB slot\n");
+	}
+
+	pci_register_phb(&p->phb, OPAL_DYNAMIC_PHB_ID);
+
+	npu2_init_ioda_cache(p);
+	npu2_hw_init(p);
+}
+
+void probe_npu2(void)
+{
+	struct dt_node *np;
+
+	/* Scan NPU XSCOM nodes */
+	dt_for_each_compatible(dt_root, np, "ibm,power9-npu")
+		npu2_probe_phb(np);
+
+	/* Scan newly created PHB nodes */
+	dt_for_each_compatible(dt_root, np, "ibm,power9-npu-pciex")
+		npu2_create_phb(np);
+}
diff --git a/include/npu2-regs.h b/include/npu2-regs.h
index 91bddb2..b00a27c 100644
--- a/include/npu2-regs.h
+++ b/include/npu2-regs.h
@@ -339,6 +339,9 @@
 #define NPU2_ATS_IODA_DATA			NPU2_REG_OFFSET(NPU2_STACK_MISC, NPU2_BLOCK_ATS, 0x110)
 #define NPU2_ATS_DMA_SYNC			NPU2_REG_OFFSET(NPU2_STACK_MISC, NPU2_BLOCK_ATS, 0x118)
 #define NPU2_ATS_TCE_KILL			NPU2_REG_OFFSET(NPU2_STACK_MISC, NPU2_BLOCK_ATS, 0x120)
+#define   NPU2_ATS_TCE_KILL_ALL			PPC_BIT(0)
+#define   NPU2_ATS_TCE_KILL_ONE			PPC_BIT(2)
+#define   NPU2_ATS_TCE_KILL_PENUM		PPC_BITMASK(4, 7)
 #define NPU2_ATS_QUIESCE_DMA			NPU2_REG_OFFSET(NPU2_STACK_MISC, NPU2_BLOCK_ATS, 0x128)
 #define NPU2_ATS_TCE_TIMEOUT_CTL		NPU2_REG_OFFSET(NPU2_STACK_MISC, NPU2_BLOCK_ATS, 0x130)
 #define NPU2_ATS_ERR_STATUS			NPU2_REG_OFFSET(NPU2_STACK_MISC, NPU2_BLOCK_ATS, 0x138)
diff --git a/include/npu2.h b/include/npu2.h
new file mode 100644
index 0000000..bf331de
--- /dev/null
+++ b/include/npu2.h
@@ -0,0 +1,141 @@
+/* Copyright 2013-2016 IBM Corp.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+ * implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __NPU2_H
+#define __NPU2_H
+
+/* Debugging options */
+#define NPU2DBG(p, fmt, a...)	prlog(PR_DEBUG, "NPU%d: " fmt, \
+				      (p)->phb.opal_id, ##a)
+#define NPU2INF(p, fmt, a...)	prlog(PR_INFO,  "NPU%d: " fmt, \
+				      (p)->phb.opal_id, ##a)
+#define NPU2ERR(p, fmt, a...)	prlog(PR_ERR,   "NPU%d: " fmt, \
+				      (p)->phb.opal_id, ##a)
+
+/* Number of PEs supported */
+#define NPU2_MAX_PE_NUM		16
+#define NPU2_RESERVED_PE_NUM	15
+
+/* This represents the state of the actual hardware BARs not the
+ * emulated PCIe BARs. The is a subtle difference between the two as
+ * not all BARs are exposed outside of skiboot. */
+struct npu2_bar {
+#define NPU2_BAR_FLAG_ENABLED	0x0010
+
+/* Generation ID's are a single space in the hardware but we split
+ * them in two for the emulated PCIe devices so we need to keep track
+ * of which one has been enabled/disabled. */
+#define NPU2_BAR_FLAG_ENABLED0	0x0080
+#define NPU2_BAR_FLAG_ENABLED1  0x0100
+	uint32_t		flags;
+
+#define NPU2_BAR_TYPE_GLOBAL	0
+#define NPU2_BAR_TYPE_PHY	1
+#define NPU2_BAR_TYPE_NTL	2
+#define NPU2_BAR_TYPE_GENID	3
+#define NPU2_BAR_TYPE_MAX	4
+	uint32_t		type;
+	uint64_t		reg;
+	uint64_t		stack;
+	uint64_t		base;
+	uint64_t		size;
+};
+
+/* Rpresents a BAR that is exposed via the PCIe emulated
+ * devices */
+struct npu2_pcie_bar {
+#define NPU2_PCIE_BAR_FLAG_SIZE_HI	0x0020
+#define NPU2_PCIE_BAR_FLAG_TRAPPED	0x0040
+	uint32_t		flags;
+	struct npu2_bar		*npu2_bar;
+	uint64_t		base;
+	uint64_t		size;
+};
+
+struct npu2;
+struct npu2_dev {
+	uint32_t		index;
+	uint32_t                flags;
+	uint64_t                xscom;
+	void			*regs;
+	struct dt_node		*dt_node;
+	struct npu2_pcie_bar	bars[2];
+	struct npu2		*npu;
+
+	/* Device and function numbers are allocated based on GPU
+	 * association. Links to connected to the same GPU will be
+	 * exposed as different functions of the same bus/device. */
+	uint32_t		bdfn;
+	uint32_t		gpu_bdfn;
+
+	/* PCI virtual device and the associated GPU device */
+	struct pci_virt_device	*pvd;
+	struct phb		*phb;
+	struct pci_device	*pd;
+
+	/* Vendor specific capability */
+	uint32_t		vendor_cap;
+
+	/* Which PHY lanes this device is associated with */
+	uint16_t		lane_mask;
+
+	/* Track currently running procedure and step number */
+	uint16_t		procedure_number;
+	uint16_t		procedure_step;
+	uint64_t		procedure_data;
+	unsigned long		procedure_tb;
+	uint32_t		procedure_status;
+
+	/* Used to associate the NPU device with GPU PCI devices */
+	const char		*slot_label;
+};
+
+struct npu2 {
+	uint32_t	index;
+	uint32_t	flags;
+	uint32_t	chip_id;
+	uint64_t	xscom_base;
+	uint64_t	at_xscom;
+	void		*regs;
+	uint64_t	mm_base;
+	uint64_t	mm_size;
+	uint32_t	base_lsi;
+	uint32_t	total_devices;
+	struct npu2_dev	*devices;
+
+	/* IODA cache */
+	uint64_t	lxive_cache[8];
+	uint64_t	bdf2pe_cache[36];
+	uint64_t	tve_cache[16];
+	bool		tx_zcal_complete[2];
+
+	/* Used to protect global MMIO space, in particular the XTS
+	 * tables. */
+	struct lock	lock;
+
+	struct phb	phb;
+};
+
+static inline struct npu2 *phb_to_npu2(struct phb *phb)
+{
+	return container_of(phb, struct npu2, phb);
+}
+
+int64_t npu2_dev_procedure(void *dev, struct pci_cfg_reg_filter *pcrf,
+			   uint32_t offset, uint32_t len, uint32_t *data,
+			   bool write);
+
+#endif /* __NPU2_H */
diff --git a/include/pci.h b/include/pci.h
index 92e3dce..704b7ad 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -315,6 +315,7 @@ enum phb_type {
 	phb_type_pcie_v2,
 	phb_type_pcie_v3,
 	phb_type_pcie_v4,
+	phb_type_npu_v2,
 };
 
 struct phb {
diff --git a/include/skiboot.h b/include/skiboot.h
index 2ea64de..73f585f 100644
--- a/include/skiboot.h
+++ b/include/skiboot.h
@@ -215,6 +215,7 @@ extern void phb3_preload_vpd(void);
 extern int phb4_preload_capp_ucode(void);
 extern void phb4_preload_vpd(void);
 extern void probe_npu(void);
+extern void probe_npu2(void);
 extern void uart_init(void);
 extern void homer_init(void);
 extern void occ_pstates_init(void);
-- 
2.1.4



More information about the Skiboot mailing list