[Skiboot] [PATCH v2 1/8] platforms/astbmc: Support SMC's P8DNU
Gavin Shan
gwshan at linux.vnet.ibm.com
Mon Feb 20 10:57:45 AEDT 2017
From: Willie Liauw <williel at supermicro.com.tw>
This supports superMicro's P8DNU platform.
Signed-off-by: Willie Liauw <williel at supermicro.com.tw>
Signed-off-by: Hank Chang <hankmax0000 at gmail.com>
Signed-off-by: Gavin Shan <gwshan at linux.vnet.ibm.com>
---
platforms/astbmc/Makefile.inc | 3 +-
platforms/astbmc/p8dnu.c | 359 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 361 insertions(+), 1 deletion(-)
create mode 100644 platforms/astbmc/p8dnu.c
diff --git a/platforms/astbmc/Makefile.inc b/platforms/astbmc/Makefile.inc
index 9affb5d..5f44719 100644
--- a/platforms/astbmc/Makefile.inc
+++ b/platforms/astbmc/Makefile.inc
@@ -1,6 +1,7 @@
SUBDIRS += $(PLATDIR)/astbmc
-ASTBMC_OBJS = palmetto.o habanero.o firestone.o p8dtu.o garrison.o barreleye.o pnor.o common.o slots.o zaius.o
+ASTBMC_OBJS = palmetto.o habanero.o firestone.o p8dtu.o p8dnu.o \
+ garrison.o barreleye.o pnor.o common.o slots.o zaius.o
ASTBMC = $(PLATDIR)/astbmc/built-in.o
$(ASTBMC): $(ASTBMC_OBJS:%=$(PLATDIR)/astbmc/%)
diff --git a/platforms/astbmc/p8dnu.c b/platforms/astbmc/p8dnu.c
new file mode 100644
index 0000000..e4aeed4
--- /dev/null
+++ b/platforms/astbmc/p8dnu.c
@@ -0,0 +1,359 @@
+/* Copyright 2017 Supermicro and IBM Corp.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+ * implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+
+#include <skiboot.h>
+#include <device.h>
+#include <console.h>
+#include <chip.h>
+#include <ipmi.h>
+#include <psi.h>
+#include <npu-regs.h>
+
+#include "astbmc.h"
+
+static const struct slot_table_entry p8dnu_phb0_0_slot[] = {
+ {
+ .etype = st_pluggable_slot,
+ .location = ST_LOC_DEVFN(0,0),
+ .name = "UIO SLOT1",
+ },
+ { .etype = st_end },
+};
+
+
+static const struct slot_table_entry p8dnu_plx_slots_00[] = {
+ {
+ .etype = st_builtin_dev,
+ .location = ST_LOC_DEVFN(1,0),
+ .name = "Onboard SATA Marvell 88SE9230",
+ },
+ {
+ .etype = st_builtin_dev,
+ .location = ST_LOC_DEVFN(2,0),
+ .name = "Slot_DUIO ",
+ },
+ {
+ .etype = st_builtin_dev,
+ .location = ST_LOC_DEVFN(8,0),
+ .name = "Intel LAN X710/X557-AT",
+ },
+ {
+ .etype = st_builtin_dev,
+ .location = ST_LOC_DEVFN(9,0),
+ .name = "Onboard VGA AST2400",
+ },
+ {
+ .etype = st_builtin_dev,
+ .location = ST_LOC_DEVFN(0xa,0),
+ .name = "Onboard USB TI TUSB7340",
+ },
+ { .etype = st_end },
+};
+
+static const struct slot_table_entry p8dnu_plx_up_00[] = {
+ {
+ .etype = st_builtin_dev,
+ .location = ST_LOC_DEVFN(0,0),
+ .children = p8dnu_plx_slots_00,
+ },
+ { .etype = st_end },
+};
+
+
+
+static const struct slot_table_entry p8dnu_phb0_1_slot[] = {
+ {
+ .etype = st_builtin_dev,
+ .location = ST_LOC_DEVFN(0,0),
+ .name = "Backplane PLX VS0",
+ .children = p8dnu_plx_up_00,
+ },
+ { .etype = st_end },
+};
+
+static const struct slot_table_entry p8dnu_phb0_2_slot[] = {
+ {
+ .etype = st_pluggable_slot,
+ .location = ST_LOC_DEVFN(0,0),
+ .name = "GPU1",
+ },
+ { .etype = st_end },
+};
+
+static const struct slot_table_entry p8dnu_phb0_3_slot[] = {
+ {
+ .etype = st_pluggable_slot,
+ .location = ST_LOC_DEVFN(0,0),
+ .name = "GPU2",
+ },
+ { .etype = st_end },
+};
+
+static const struct slot_table_entry p8dnu_npu0_slots[] = {
+ {
+ .etype = st_npu_slot,
+ .location = ST_LOC_NPU_GROUP(0),
+ .name = "GPU2",
+ },
+ {
+ .etype = st_npu_slot,
+ .location = ST_LOC_NPU_GROUP(1),
+ .name = "GPU1",
+ },
+ { .etype = st_end },
+};
+
+static const struct slot_table_entry p8dnu_phb1_0_slot[] = {
+ {
+ .etype = st_pluggable_slot,
+ .location = ST_LOC_DEVFN(0,0),
+ .name = "WIO SLOT1",
+ },
+ { .etype = st_end },
+};
+
+static const struct slot_table_entry p8dnu_plx_slots[] = {
+ {
+ .etype = st_pluggable_slot,
+ .location = ST_LOC_DEVFN(5,0),
+ .name = "RSC-R1UW-E8R SLOT1",
+ },
+ {
+ .etype = st_pluggable_slot,
+ .location = ST_LOC_DEVFN(0xd,0),
+ .name = "WIO SLOT2",
+ },
+ {
+ .etype = st_pluggable_slot,
+ .location = ST_LOC_DEVFN(0xc,0),
+ .name = "WIO SLOT3",
+ },
+ { .etype = st_end },
+};
+
+static const struct slot_table_entry p8dnu_plx_up[] = {
+ {
+ .etype = st_builtin_dev,
+ .location = ST_LOC_DEVFN(0,0),
+ .children = p8dnu_plx_slots,
+ },
+ { .etype = st_end },
+};
+
+static const struct slot_table_entry p8dnu_phb1_1_slot[] = {
+ {
+ .etype = st_builtin_dev,
+ .location = ST_LOC_DEVFN(0,0),
+ .name = "Backplane PLX VS1",
+ .children = p8dnu_plx_up,
+ },
+ { .etype = st_end },
+};
+
+static const struct slot_table_entry p8dnu_phb1_2_slot[] = {
+ {
+ .etype = st_pluggable_slot,
+ .location = ST_LOC_DEVFN(0,0),
+ .name = "GPU3",
+ },
+ { .etype = st_end },
+};
+
+static const struct slot_table_entry p8dnu_phb1_3_slot[] = {
+ {
+ .etype = st_pluggable_slot,
+ .location = ST_LOC_DEVFN(0,0),
+ .name = "GPU4",
+ },
+ { .etype = st_end },
+};
+
+static const struct slot_table_entry p8dnu_npu1_slots[] = {
+ {
+ .etype = st_npu_slot,
+ .location = ST_LOC_NPU_GROUP(0),
+ .name = "GPU4",
+ },
+ {
+ .etype = st_npu_slot,
+ .location = ST_LOC_NPU_GROUP(1),
+ .name = "GPU3",
+ },
+ { .etype = st_end },
+};
+
+static const struct slot_table_entry p8dnu_phb_table[] = {
+ {
+ .etype = st_phb,
+ .location = ST_LOC_PHB(0,0),
+ .children = p8dnu_phb0_0_slot,
+ },
+ {
+ .etype = st_phb,
+ .location = ST_LOC_PHB(0,1),
+ .children = p8dnu_phb0_1_slot,
+ },
+ {
+ .etype = st_phb,
+ .location = ST_LOC_PHB(0,2),
+ .children = p8dnu_phb0_2_slot,
+ },
+ {
+ .etype = st_phb,
+ .location = ST_LOC_PHB(0,3),
+ .children = p8dnu_phb0_3_slot,
+ },
+ {
+ .etype = st_phb,
+ .location = ST_LOC_PHB(0,4),
+ .children = p8dnu_npu0_slots,
+ },
+ {
+ .etype = st_phb,
+ .location = ST_LOC_PHB(1,0),
+ .children = p8dnu_phb1_0_slot,
+ },
+ {
+ .etype = st_phb,
+ .location = ST_LOC_PHB(1,1),
+ .children = p8dnu_phb1_1_slot,
+ },
+ {
+ .etype = st_phb,
+ .location = ST_LOC_PHB(1,2),
+ .children = p8dnu_phb1_2_slot,
+ },
+ {
+ .etype = st_phb,
+ .location = ST_LOC_PHB(1,3),
+ .children = p8dnu_phb1_3_slot,
+ },
+ {
+ .etype = st_phb,
+ .location = ST_LOC_PHB(1,4),
+ .children = p8dnu_npu1_slots,
+ },
+ { .etype = st_end },
+};
+
+#define NPU_BASE 0x8013c00
+#define NPU_SIZE 0x2c
+#define NPU_INDIRECT0 0x8000000008010c3f
+#define NPU_INDIRECT1 0x8000000008010c7f
+
+static void create_link(struct dt_node *npu, int group, int index)
+{
+ struct dt_node *link;
+ uint32_t lane_mask;
+ uint64_t phy;
+ char namebuf[32];
+
+ snprintf(namebuf, sizeof(namebuf), "link@%x", index);
+ link = dt_new(npu, namebuf);
+
+ dt_add_property_string(link, "compatible", "ibm,npu-link");
+ dt_add_property_cells(link, "ibm,npu-link-index", index);
+
+ if (index < 4) {
+ phy = NPU_INDIRECT0;
+ lane_mask = 0xff << (index * 8);
+ } else {
+ phy = NPU_INDIRECT1;
+ lane_mask = 0xff0000 >> (index - 3) * 8;
+ }
+ dt_add_property_u64s(link, "ibm,npu-phy", phy);
+ dt_add_property_cells(link, "ibm,npu-lane-mask", lane_mask);
+ dt_add_property_cells(link, "ibm,npu-group-id", group);
+}
+
+static void dt_create_npu(void)
+{
+ struct dt_node *xscom, *npu;
+ char namebuf[32];
+
+ dt_for_each_compatible(dt_root, xscom, "ibm,xscom") {
+ snprintf(namebuf, sizeof(namebuf), "npu@%x", NPU_BASE);
+ npu = dt_new(xscom, namebuf);
+ dt_add_property_cells(npu, "reg", NPU_BASE, NPU_SIZE);
+ dt_add_property_strings(npu, "compatible", "ibm,power8-npu");
+
+ /*
+ * Use the first available PHB index which is 4 given
+ * there are three normal PHBs.
+ */
+ dt_add_property_cells(npu, "ibm,phb-index", 4);
+ dt_add_property_cells(npu, "ibm,npu-index", 0);
+ dt_add_property_cells(npu, "ibm,npu-links", 4);
+
+ /*
+ * On p8dnu we have 2 links per GPU device. These are
+ * grouped together as per the slot tables above.
+ */
+ create_link(npu, 0, 0);
+ create_link(npu, 0, 1);
+ create_link(npu, 1, 4);
+ create_link(npu, 1, 5);
+ }
+}
+
+static bool p8dnu_probe(void)
+{
+ if (!dt_node_is_compatible(dt_root, "supermicro,p8dnu"))
+ return false;
+
+ /* Lot of common early inits here */
+ astbmc_early_init();
+
+ /*
+ * Override external interrupt policy -> send to Linux
+ *
+ * On Naples, we get LPC interrupts via the built-in LPC
+ * controller demuxer, not an external CPLD. The external
+ * interrupt is for other uses, such as the TPM chip, we
+ * currently route it to Linux, but we might change that
+ * later if we decide we need it.
+ */
+ psi_set_external_irq_policy(EXTERNAL_IRQ_POLICY_LINUX);
+
+ /* Fixups until HB get the NPU bindings */
+ dt_create_npu();
+
+ slot_table_init(p8dnu_phb_table);
+
+ return true;
+}
+
+static const struct bmc_platform astbmc_smc = {
+ .name = "SMC",
+ .ipmi_oem_partial_add_esel = IPMI_CODE(0x3a, 0xf0),
+ .ipmi_oem_pnor_access_status = IPMI_CODE(0x3a, 0x07),
+};
+
+DECLARE_PLATFORM(p8dnu) = {
+ .name = "P8DNU",
+ .probe = p8dnu_probe,
+ .bmc = &astbmc_smc,
+ .init = astbmc_init,
+ .pci_get_slot_info = slot_table_get_slot_info,
+ .cec_power_down = astbmc_ipmi_power_down,
+ .cec_reboot = astbmc_ipmi_reboot,
+ .elog_commit = ipmi_elog_commit,
+ .start_preload_resource = flash_start_preload_resource,
+ .resource_loaded = flash_resource_loaded,
+ .exit = ipmi_wdt_final_reset,
+ .terminate = ipmi_terminate,
+};
--
2.7.4
More information about the Skiboot
mailing list