[Skiboot] [PATCH 2/4] capi: Move phb3 capp registers to specialized files

[Christophe Lombard]

The definitions of the CAPP registers for PHB3 are moved in a specific
file.
The updated file capp.h will be used for the common functionalities
about the CAPP for PHB3 and PHB4.

Signed-off-by: Christophe Lombard <clombard at linux.vnet.ibm.com>
---
 core/hmi.c          |  2 +-
 hw/phb3.c           |  1 +
 include/capp.h      | 29 -----------------------------
 include/phb3-capp.h | 50 ++++++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 52 insertions(+), 30 deletions(-)
 create mode 100644 include/phb3-capp.h

diff --git a/core/hmi.c b/core/hmi.c
index 6fe060d..eb43807 100644
--- a/core/hmi.c
+++ b/core/hmi.c
@@ -19,7 +19,7 @@
 #include <processor.h>
 #include <chiptod.h>
 #include <xscom.h>
-#include <capp.h>
+#include <phb3-capp.h>
 #include <pci.h>
 #include <cpu.h>
 #include <chip.h>
diff --git a/hw/phb3.c b/hw/phb3.c
index 4010739..f0e957c 100644
--- a/hw/phb3.c
+++ b/hw/phb3.c
@@ -30,6 +30,7 @@
 #include <affinity.h>
 #include <phb3.h>
 #include <phb3-regs.h>
+#include <phb3-capp.h>
 #include <capp.h>
 #include <fsp.h>
 #include <chip.h>
diff --git a/include/capp.h b/include/capp.h
index c76258b..d0c28c9 100644
--- a/include/capp.h
+++ b/include/capp.h
@@ -62,33 +62,4 @@ enum capp_reg {
 	apc_master_powerbus_ctrl	= 0xB
 };
 
-#define CAPP_SNP_ARRAY_ADDR_REG			0x2013028
-#define CAPP_APC_MASTER_ARRAY_ADDR_REG		0x201302A
-#define CAPP_SNP_ARRAY_WRITE_REG		0x2013801
-#define CAPP_APC_MASTER_ARRAY_WRITE_REG		0x2013802
-
-#define CAPP_FIR                                0x2013000
-#define CAPP_ERR_RPT_CLR                        0x2013013
-#define APC_MASTER_PB_CTRL			0x2013018
-#define APC_MASTER_CAPI_CTRL			0x2013019
-#define TRANSPORT_CONTROL			0x201301C
-#define CANNED_PRESP_MAP0			0x201301D
-#define CANNED_PRESP_MAP1			0x201301E
-#define CANNED_PRESP_MAP2			0x201301F
-#define CAPP_ERR_STATUS_CTRL			0x201300E
-#define FLUSH_SUE_STATE_MAP			0x201300F
-#define CAPP_TB					0x2013026
-#define CAPP_TFMR				0x2013027
-#define CAPP_EPOCH_TIMER_CTRL			0x201302C
-#define FLUSH_UOP_CONFIG1			0x2013803
-#define FLUSH_UOP_CONFIG2			0x2013804
-#define SNOOP_CAPI_CONFIG			0x201301A
-
-/*
- * Naples has two CAPP units, statically mapped:
- * CAPP0 attached to PHB0, and CAPP1 attached to PHB1.
- * The addresses of CAPP1 XSCOMS registers are 0x180 away.
- */
-#define CAPP1_REG_OFFSET 0x180
-
 #endif /* __CAPP_H */
diff --git a/include/phb3-capp.h b/include/phb3-capp.h
new file mode 100644
index 0000000..3834ef4
--- /dev/null
+++ b/include/phb3-capp.h
@@ -0,0 +1,50 @@
+/* Copyright 2013-2017 IBM Corp.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * 	http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+ * implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __PHB3_CAPP_H
+#define __PHB3_CAPP_H
+
+
+#define CAPP_SNP_ARRAY_ADDR_REG 		0x2013028
+#define CAPP_APC_MASTER_ARRAY_ADDR_REG		0x201302A
+#define CAPP_SNP_ARRAY_WRITE_REG		0x2013801
+#define CAPP_APC_MASTER_ARRAY_WRITE_REG 	0x2013802
+
+#define CAPP_FIR				0x2013000
+#define CAPP_ERR_RPT_CLR			0x2013013
+#define APC_MASTER_PB_CTRL			0x2013018
+#define APC_MASTER_CAPI_CTRL			0x2013019
+#define TRANSPORT_CONTROL			0x201301C
+#define CANNED_PRESP_MAP0			0x201301D
+#define CANNED_PRESP_MAP1			0x201301E
+#define CANNED_PRESP_MAP2			0x201301F
+#define CAPP_ERR_STATUS_CTRL			0x201300E
+#define FLUSH_SUE_STATE_MAP			0x201300F
+#define CAPP_TB 				0x2013026
+#define CAPP_TFMR				0x2013027
+#define CAPP_EPOCH_TIMER_CTRL			0x201302C
+#define FLUSH_UOP_CONFIG1			0x2013803
+#define FLUSH_UOP_CONFIG2			0x2013804
+#define SNOOP_CAPI_CONFIG			0x201301A
+
+/*
+ * Naples has two CAPP units, statically mapped:
+ * CAPP0 attached to PHB0, and CAPP1 attached to PHB1.
+ * The addresses of CAPP1 XSCOMS registers are 0x180 away.
+ */
+#define CAPP1_REG_OFFSET 0x180
+
+#endif /* __PHB3_CAPP_H */
-- 
2.7.4