[Skiboot] [PATCH v3 1/4] hw/lpc-mbox: Add skiboot driver for the BMC mbox regs
Suraj Jitindar Singh
sjitindarsingh at gmail.com
Mon Feb 6 17:14:30 AEDT 2017
On Thu, 2017-02-02 at 17:54 +1100, Cyril Bur wrote:
> Signed-off-by: Cyril Bur <cyril.bur at au1.ibm.com>
> ---
> hw/Makefile.inc | 2 +-
> hw/lpc-mbox.c | 278
> +++++++++++++++++++++++++++++++++++++++++++++++++++++
> include/lpc-mbox.h | 58 +++++++++++
> include/skiboot.h | 1 +
> 4 files changed, 338 insertions(+), 1 deletion(-)
> create mode 100644 hw/lpc-mbox.c
> create mode 100644 include/lpc-mbox.h
>
> diff --git a/hw/Makefile.inc b/hw/Makefile.inc
> index f2dc328e..d87f85e4 100644
> --- a/hw/Makefile.inc
> +++ b/hw/Makefile.inc
> @@ -6,7 +6,7 @@ HW_OBJS += nx.o nx-rng.o nx-crypto.o nx-842.o
> HW_OBJS += p7ioc.o p7ioc-inits.o p7ioc-phb.o
> HW_OBJS += phb3.o sfc-ctrl.o fake-rtc.o bt.o p8-i2c.o prd.o
> HW_OBJS += dts.o lpc-rtc.o npu.o npu-hw-procedures.o xive.o phb4.o
> -HW_OBJS += fake-nvram.o
> +HW_OBJS += fake-nvram.o lpc-mbox.o
> HW=hw/built-in.o
>
> # FIXME hack this for now
> diff --git a/hw/lpc-mbox.c b/hw/lpc-mbox.c
> new file mode 100644
> index 00000000..2376f45f
> --- /dev/null
> +++ b/hw/lpc-mbox.c
> @@ -0,0 +1,278 @@
> +/* Copyright 2017 IBM Corp.
> + *
> + * Licensed under the Apache License, Version 2.0 (the "License");
> + * you may not use this file except in compliance with the License.
> + * You may obtain a copy of the License at
> + *
> + * http://www.apache.org/licenses/LICENSE-2.0
> + *
> + * Unless required by applicable law or agreed to in writing,
> software
> + * distributed under the License is distributed on an "AS IS" BASIS,
> + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
> + * implied.
> + * See the License for the specific language governing permissions
> and
> + * limitations under the License.
> + */
> +
> +#define pr_fmt(fmt) "LPC-MBOX: " fmt
> +
> +#include <skiboot.h>
> +#include <lpc.h>
> +#include <console.h>
> +#include <opal.h>
> +#include <device.h>
> +#include <interrupts.h>
> +#include <processor.h>
> +#include <errorlog.h>
> +#include <trace.h>
> +#include <timebase.h>
> +#include <timer.h>
> +#include <cpu.h>
> +#include <chip.h>
> +#include <io.h>
> +
> +#include <lpc-mbox.h>
> +
> +#define MBOX_FLAG_REG 0x0f
> +#define MBOX_STATUS_0 0x10
> +#define MBOX_STATUS_ATTN (1 << 7)
> +#define MBOX_STATUS_1 0x11
> +#define MBOX_BMC_CTRL 0x12
> +#define MBOX_CTRL_INT_STATUS (1 << 7)
> +#define MBOX_CTRL_INT_MASK (1 << 1)
> +#define MBOX_CTRL_INT_SEND (1 << 0)
> +#define MBOX_HOST_CTRL 0x13
> +#define MBOX_BMC_INT_EN_0 0x14
> +#define MBOX_BMC_INT_EN_1 0x15
> +#define MBOX_HOST_INT_EN_0 0x16
> +#define MBOX_HOST_INT_EN_1 0x17
> +
> +#define MBOX_MAX_QUEUE_LEN 5
> +
> +#define BMC_RESET 1
> +#define BMC_COMPLETE 2
> +
> +struct mbox {
> + uint32_t base;
> + int queue_len;
> + bool irq_ok;
> + uint8_t seq;
> + struct timer poller;
> + struct lock lock; /* Protect in_flight */
> + struct bmc_mbox_msg *in_flight;
> +};
> +
> +static struct mbox mbox;
> +
> +/*
> + * MBOX accesses
> + */
> +
> +static void bmc_mbox_outb(uint8_t val, uint8_t reg)
> +{
> + lpc_outb(val, mbox.base + reg);
> +}
> +
> +static uint8_t bmc_mbox_inb(uint8_t reg)
> +{
> + return lpc_inb(mbox.base + reg);
> +}
> +
> +static void bmc_mbox_recv_message(struct bmc_mbox_msg *msg)
> +{
> + int i;
> +
> + msg->response = bmc_mbox_inb(13);
> + msg->seq = bmc_mbox_inb(1);
> + prlog(PR_DEBUG, "Receving message resp %d seq: %d\n",
> + msg->response, msg->seq);
> + for (i = 0; i < BMC_MBOX_DATA_BYTES; i++) {
> + msg->data[i] = bmc_mbox_inb(i + 2);
> + prlog(PR_TRACE, "Read byte %d val 0x%02x\n", i, msg-
> >data[i]);
> + }
> + prlog(PR_DEBUG, "Done\n");
> +}
> +
> +/* This needs work, don't write the data bytes that aren't needed */
> +static void bmc_mbox_send_message(struct bmc_mbox_msg *msg)
> +{
> + int i;
> +
> + if (!lpc_ok())
> + /* We're going to have to handle this better */
> + prlog(PR_ERR, "LPC isn't ok\n");
> + prlog(PR_DEBUG, "Sending command %d seq %d\n", msg->command,
> msg->seq);
> + bmc_mbox_outb(msg->command, 0);
> + bmc_mbox_outb(msg->seq, 1);
> + for (i = 0; i < BMC_MBOX_DATA_BYTES; i++) {
> + prlog(PR_TRACE, "Sending byte %d val %d\n", i + 2,
> msg->data[i]);
> + bmc_mbox_outb(msg->data[i], i + 2);
> + }
> +
> + /* Ping */
> + prlog(PR_DEBUG, "Sending BMC interrupt\n");
> + bmc_mbox_outb(MBOX_CTRL_INT_SEND, MBOX_HOST_CTRL);
> +}
> +
> +int bmc_mbox_enqueue(struct bmc_mbox_msg *msg)
> +{
> + if (!mbox.base) {
> + prlog(PR_CRIT, "Using MBOX without init!\n");
> + return OPAL_WRONG_STATE;
> + }
> +
> + lock(&mbox.lock);
> + if (mbox.in_flight) {
> + prlog(PR_DEBUG, "MBOX message already in flight\n");
> + unlock(&mbox.lock);
> + return OPAL_BUSY;
> + }
> +
> + mbox.in_flight = msg;
> + unlock(&mbox.lock);
> +
> + msg->seq = ++mbox.seq;
> + bmc_mbox_send_message(msg);
> +
> + schedule_timer(&mbox.poller, mbox.irq_ok ?
> + TIMER_POLL :
> msecs_to_tb(MBOX_DEFAULT_POLL_MS));
> +
> + return 0;
> +}
> +
> +static void mbox_poll(struct timer *t __unused, void *data __unused,
> + uint64_t now __unused)
> +{
> + struct bmc_mbox_msg *msg;
> +
> + /* This is a 'registered' the message you just sent me */
> + if (bmc_mbox_inb(MBOX_HOST_CTRL) & MBOX_CTRL_INT_STATUS) {
> + /* W1C on that reg */
> + bmc_mbox_outb(MBOX_CTRL_INT_STATUS, MBOX_HOST_CTRL);
> +
> + prlog(PR_INSANE, "Got a regular interrupt\n");
> + /*
> + * Better implementations could allow for having
> + * mulitiple outstanding messages to the BMC, in
> that
> + * case the responded message wouldn't necessarily
> be
> + * list_top()
> + */
> + /*
> + * This should be safe lockless
> + */
> + msg = mbox.in_flight;
> + if (msg == NULL) {
> + prlog(PR_CRIT, "Couldn't find the
> message!!\n");
> + return;
> + }
> + bmc_mbox_recv_message(msg);
> + msg->callback(msg);
> + prlog(PR_INSANE, "Callback returned\n");
> +
> + /* Yeah we'll need locks here */
> + lock(&mbox.lock);
> + mbox.in_flight = NULL;
> + unlock(&mbox.lock);
> + }
> +
> + /* This is to indicate that the BMC has information to tell
> us */
> + if (bmc_mbox_inb(MBOX_STATUS_1) & MBOX_STATUS_ATTN) {
> + uint8_t action;
> +
> + /* W1C on that reg */
> + bmc_mbox_outb(MBOX_STATUS_ATTN, MBOX_STATUS_1);
> +
> + action = bmc_mbox_inb(MBOX_FLAG_REG);
> + prlog(PR_INSANE, "Got a status register interrupt
> with action 0x%02x\n",
> + action);
> +
> + if (action & BMC_RESET) {
> + /* TODO Freak */
> + prlog(PR_WARNING, "BMC reset detected\n");
> + action &= ~BMC_RESET;
> + }
> +
> + if (action)
> + prlog(PR_ERR, "Got a status bit set that
> don't know about: 0x%02x\n",
> + action);
> + }
> +
> + schedule_timer(&mbox.poller,
> + mbox.irq_ok ? TIMER_POLL :
> msecs_to_tb(MBOX_DEFAULT_POLL_MS));
> +}
> +
> +static void mbox_irq(uint32_t chip_id __unused, uint32_t irq_mask
> __unused)
> +{
> + mbox.irq_ok = true;
> + mbox_poll(NULL, NULL, 0);
> +}
> +
> +static struct lpc_client mbox_lpc_client = {
> + .interrupt = mbox_irq,
> +};
> +
> +static bool mbox_init_hw(void)
> +{
> + /*
> + * Turns out there isn't anything to do.
> + * It might be a good idea to santise the registers though.
> + * TODO
> + */
> + return true;
> +}
> +
> +void mbox_init(void)
> +{
> + const struct dt_property *prop;
> + struct dt_node *n;
> + uint32_t irq, chip_id;
> +
> + prlog(PR_DEBUG, "Attempting mbox init\n");
> + n = dt_find_compatible_node(dt_root, NULL, "mbox");
> + if (!n) {
> + prlog(PR_ERR, "No device tree entry\n");
> + return;
> + }
> +
> + /* Read the interrupts property if any */
> + irq = dt_prop_get_u32_def(n, "interrupts", 0);
> + if (!irq) {
> + prlog(PR_ERR, "No interrupts property\n");
> + return;
> + }
> +
> + if (!lpc_present()) {
> + prlog(PR_ERR, "LPC not present\n");
> + return;
> + }
> +
> + /* Get IO base */
> + prop = dt_find_property(n, "reg");
> + if (!prop) {
> + prlog(PR_ERR, "Can't find reg property\n");
> + return;
> + }
> + if (dt_property_get_cell(prop, 0) != OPAL_LPC_IO) {
> + prlog(PR_ERR, "Only supports IO addresses\n");
> + return;
> + }
> + mbox.base = dt_property_get_cell(prop, 1);
> +
> + if (!mbox_init_hw()) {
> + prlog(PR_DEBUG, "Couldn't init HW\n");
> + return;
> + }
> +
> + mbox.queue_len = 0;
> + mbox.in_flight = NULL;
> + init_lock(&mbox.lock);
> +
> + init_timer(&mbox.poller, mbox_poll, NULL);
> +
> + chip_id = dt_get_chip_id(n);
> + mbox_lpc_client.interrupts = LPC_IRQ(irq);
> + lpc_register_client(chip_id, &mbox_lpc_client);
> + prlog(PR_DEBUG, "Using %d chipid and %d IRQ at 0x%08x\n",
> chip_id, irq, mbox.base);
> +}
> +
> +
> diff --git a/include/lpc-mbox.h b/include/lpc-mbox.h
> new file mode 100644
> index 00000000..f9a54d9a
> --- /dev/null
> +++ b/include/lpc-mbox.h
> @@ -0,0 +1,58 @@
> +/* Copyright 2017 IBM Corp.
> + *
> + * Licensed under the Apache License, Version 2.0 (the "License");
> + * you may not use this file except in compliance with the License.
> + * You may obtain a copy of the License at
> + *
> + * http://www.apache.org/licenses/LICENSE-2.0
> + *
> + * Unless required by applicable law or agreed to in writing,
> software
> + * distributed under the License is distributed on an "AS IS" BASIS,
> + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
> + * implied.
> + * See the License for the specific language governing permissions
> and
> + * limitations under the License.
> + */
> +
> +#ifndef __LPC_MBOX_H
> +#define __LPC_MBOX_H
> +
> +#include <opal.h>
> +#include <ccan/endian/endian.h>
> +
> +#define BMC_MBOX_DATA_BYTES 11
> +
> +#define MBOX_C_RESET_STATE 0x01
> +#define MBOX_C_GET_MBOX_INFO 0x02
> +#define MBOX_C_GET_FLASH_INFO 0x03
> +#define MBOX_C_CREATE_READ_WINDOW 0x04
> +#define MBOX_C_CLOSE_WINDOW 0x05
> +#define MBOX_C_CREATE_WRITE_WINDOW 0x06
> +#define MBOX_C_MARK_WRITE_DIRTY 0x07
> +#define MBOX_C_WRITE_FLUSH 0x08
> +#define MBOX_C_BMC_EVENT_ACK 0x09
> +
> +#define MBOX_R_SUCCESS 0x01
> +#define MBOX_R_PARAM_ERROR 0x02
> +#define MBOX_R_WRITE_ERROR 0x03
> +#define MBOX_R_SYSTEM_ERROR 0x04
> +#define MBOX_R_TIMEOUT 0x05
> +
> +/* Default poll interval before interrupts are working */
> +#define MBOX_DEFAULT_POLL_MS 200
> +
> +struct bmc_mbox_msg {
> + uint8_t command;
> + uint8_t seq;
> + uint8_t data[BMC_MBOX_DATA_BYTES];
Also, since we changed the name of this in the protocol description,
can we also change this to args[].
> + uint8_t response;
> + uint8_t host;
> + uint8_t bmc;
> + void (*callback)(struct bmc_mbox_msg *);
> + void *priv;
> + struct list_node link;
> +};
> +
> +int bmc_mbox_enqueue(struct bmc_mbox_msg *msg);
> +
> +#endif /* __LPC_MBOX_H */
> diff --git a/include/skiboot.h b/include/skiboot.h
> index 2ea64de3..bc716f9f 100644
> --- a/include/skiboot.h
> +++ b/include/skiboot.h
> @@ -216,6 +216,7 @@ extern int phb4_preload_capp_ucode(void);
> extern void phb4_preload_vpd(void);
> extern void probe_npu(void);
> extern void uart_init(void);
> +extern void mbox_init(void);
> extern void homer_init(void);
> extern void occ_pstates_init(void);
> extern void slw_init(void);
More information about the Skiboot
mailing list