[Skiboot] [PATCH 1/9] npu2: Split out common helper functions into separate file
Andrew Donnellan
andrew.donnellan at au1.ibm.com
Mon Dec 18 18:07:52 AEDT 2017
Split out common helper functions for NPU register access into a separate
file, as these will be used extensively by both NVLink and OpenCAPI code.
Signed-off-by: Andrew Donnellan <andrew.donnellan at au1.ibm.com>
---
hw/Makefile.inc | 2 +-
hw/npu2-common.c | 98 ++++++++++++++++++++++++++++++++++++++++++++++-
hw/npu2.c | 92 +-------------------------------------------
include/npu2-regs.h | 5 ++-
include/npu2.h | 2 +-
5 files changed, 106 insertions(+), 93 deletions(-)
create mode 100644 hw/npu2-common.c
diff --git a/hw/Makefile.inc b/hw/Makefile.inc
index 04cacd1..cf8649d 100644
--- a/hw/Makefile.inc
+++ b/hw/Makefile.inc
@@ -7,7 +7,7 @@ HW_OBJS += p7ioc.o p7ioc-inits.o p7ioc-phb.o
HW_OBJS += phb3.o sfc-ctrl.o fake-rtc.o bt.o p8-i2c.o prd.o
HW_OBJS += dts.o lpc-rtc.o npu.o npu-hw-procedures.o xive.o phb4.o
HW_OBJS += fake-nvram.o lpc-mbox.o npu2.o npu2-hw-procedures.o
-HW_OBJS += phys-map.o sbe-p9.o capp.o occ-sensor.o vas.o
+HW_OBJS += npu2-common.o phys-map.o sbe-p9.o capp.o occ-sensor.o vas.o
HW=hw/built-in.o
# FIXME hack this for now
diff --git a/hw/npu2-common.c b/hw/npu2-common.c
new file mode 100644
index 0000000..cf616f3
--- /dev/null
+++ b/hw/npu2-common.c
@@ -0,0 +1,98 @@
+#include <skiboot.h>
+#include <xscom.h>
+#include <pci.h>
+#include <npu2.h>
+#include <npu2-regs.h>
+#include <bitutils.h>
+
+bool is_p9dd1(void)
+{
+ struct proc_chip *chip = next_chip(NULL);
+
+ return chip &&
+ (chip->type == PROC_CHIP_P9_NIMBUS ||
+ chip->type == PROC_CHIP_P9_CUMULUS) &&
+ (chip->ec_level & 0xf0) == 0x10;
+}
+
+/*
+ * We use the indirect method because it uses the same addresses as
+ * the MMIO offsets (NPU RING)
+ */
+static void npu2_scom_set_addr(uint64_t gcid, uint64_t scom_base,
+ uint64_t addr, uint64_t size)
+{
+ uint64_t isa = is_p9dd1() ? NPU2_DD1_MISC_SCOM_IND_SCOM_ADDR :
+ NPU2_MISC_SCOM_IND_SCOM_ADDR;
+
+ addr = SETFIELD(NPU2_MISC_DA_ADDR, 0ull, addr);
+ addr = SETFIELD(NPU2_MISC_DA_LEN, addr, size);
+ xscom_write(gcid, scom_base + isa, addr);
+}
+
+void npu2_scom_write(uint64_t gcid, uint64_t scom_base,
+ uint64_t reg, uint64_t size,
+ uint64_t val)
+{
+ uint64_t isd = is_p9dd1() ? NPU2_DD1_MISC_SCOM_IND_SCOM_DATA :
+ NPU2_MISC_SCOM_IND_SCOM_DATA;
+
+ npu2_scom_set_addr(gcid, scom_base, reg, size);
+ xscom_write(gcid, scom_base + isd, val);
+}
+
+uint64_t npu2_scom_read(uint64_t gcid, uint64_t scom_base,
+ uint64_t reg, uint64_t size)
+{
+ uint64_t val;
+ uint64_t isd = is_p9dd1() ? NPU2_DD1_MISC_SCOM_IND_SCOM_DATA :
+ NPU2_MISC_SCOM_IND_SCOM_DATA;
+
+ npu2_scom_set_addr(gcid, scom_base, reg, size);
+ xscom_read(gcid, scom_base + isd, &val);
+
+ return val;
+}
+
+void npu2_write_4b(struct npu2 *p, uint64_t reg, uint32_t val)
+{
+ npu2_scom_write(p->chip_id, p->xscom_base, reg, NPU2_MISC_DA_LEN_4B,
+ (uint64_t)val << 32);
+}
+
+uint32_t npu2_read_4b(struct npu2 *p, uint64_t reg)
+{
+ return npu2_scom_read(p->chip_id, p->xscom_base, reg,
+ NPU2_MISC_DA_LEN_4B) >> 32;
+}
+
+void npu2_write(struct npu2 *p, uint64_t reg, uint64_t val)
+{
+ npu2_scom_write(p->chip_id, p->xscom_base, reg, NPU2_MISC_DA_LEN_8B, val);
+}
+
+uint64_t npu2_read(struct npu2 *p, uint64_t reg)
+{
+ return npu2_scom_read(p->chip_id, p->xscom_base, reg, NPU2_MISC_DA_LEN_8B);
+}
+
+void npu2_write_mask(struct npu2 *p, uint64_t reg, uint64_t val, uint64_t mask)
+{
+ uint64_t new_val;
+
+ new_val = npu2_read(p, reg);
+ new_val &= ~mask;
+ new_val |= val & mask;
+ npu2_scom_write(p->chip_id, p->xscom_base, reg, NPU2_MISC_DA_LEN_8B, new_val);
+}
+
+void npu2_write_mask_4b(struct npu2 *p, uint64_t reg, uint32_t val, uint32_t mask)
+{
+ uint32_t new_val;
+
+ new_val = npu2_read_4b(p, reg);
+ new_val &= ~mask;
+ new_val |= val & mask;
+ npu2_scom_write(p->chip_id, p->xscom_base, reg, NPU2_MISC_DA_LEN_4B,
+ (uint64_t)new_val << 32);
+}
diff --git a/hw/npu2.c b/hw/npu2.c
index 7ffb094..e66ceb9 100644
--- a/hw/npu2.c
+++ b/hw/npu2.c
@@ -64,98 +64,6 @@
* configure one particular BAR.
*/
-static bool is_p9dd1(void)
-{
- struct proc_chip *chip = next_chip(NULL);
-
- return chip &&
- (chip->type == PROC_CHIP_P9_NIMBUS ||
- chip->type == PROC_CHIP_P9_CUMULUS) &&
- (chip->ec_level & 0xf0) == 0x10;
-}
-
-/*
- * We use the indirect method because it uses the same addresses as
- * the MMIO offsets (NPU RING)
- */
-static void npu2_scom_set_addr(uint64_t gcid, uint64_t scom_base,
- uint64_t addr, uint64_t size)
-{
- uint64_t isa = is_p9dd1() ? NPU2_DD1_MISC_SCOM_IND_SCOM_ADDR :
- NPU2_MISC_SCOM_IND_SCOM_ADDR;
-
- addr = SETFIELD(NPU2_MISC_DA_ADDR, 0ull, addr);
- addr = SETFIELD(NPU2_MISC_DA_LEN, addr, size);
- xscom_write(gcid, scom_base + isa, addr);
-}
-
-static void npu2_scom_write(uint64_t gcid, uint64_t scom_base,
- uint64_t reg, uint64_t size,
- uint64_t val)
-{
- uint64_t isd = is_p9dd1() ? NPU2_DD1_MISC_SCOM_IND_SCOM_DATA :
- NPU2_MISC_SCOM_IND_SCOM_DATA;
-
- npu2_scom_set_addr(gcid, scom_base, reg, size);
- xscom_write(gcid, scom_base + isd, val);
-}
-
-static uint64_t npu2_scom_read(uint64_t gcid, uint64_t scom_base,
- uint64_t reg, uint64_t size)
-{
- uint64_t val;
- uint64_t isd = is_p9dd1() ? NPU2_DD1_MISC_SCOM_IND_SCOM_DATA :
- NPU2_MISC_SCOM_IND_SCOM_DATA;
-
- npu2_scom_set_addr(gcid, scom_base, reg, size);
- xscom_read(gcid, scom_base + isd, &val);
-
- return val;
-}
-
-void npu2_write_4b(struct npu2 *p, uint64_t reg, uint32_t val)
-{
- npu2_scom_write(p->chip_id, p->xscom_base, reg, NPU2_MISC_DA_LEN_4B,
- (uint64_t)val << 32);
-}
-
-uint32_t npu2_read_4b(struct npu2 *p, uint64_t reg)
-{
- return npu2_scom_read(p->chip_id, p->xscom_base, reg,
- NPU2_MISC_DA_LEN_4B) >> 32;
-}
-
-void npu2_write(struct npu2 *p, uint64_t reg, uint64_t val)
-{
- npu2_scom_write(p->chip_id, p->xscom_base, reg, NPU2_MISC_DA_LEN_8B, val);
-}
-
-uint64_t npu2_read(struct npu2 *p, uint64_t reg)
-{
- return npu2_scom_read(p->chip_id, p->xscom_base, reg, NPU2_MISC_DA_LEN_8B);
-}
-
-void npu2_write_mask(struct npu2 *p, uint64_t reg, uint64_t val, uint64_t mask)
-{
- uint64_t new_val;
-
- new_val = npu2_read(p, reg);
- new_val &= ~mask;
- new_val |= val & mask;
- npu2_scom_write(p->chip_id, p->xscom_base, reg, NPU2_MISC_DA_LEN_8B, new_val);
-}
-
-void npu2_write_mask_4b(struct npu2 *p, uint64_t reg, uint32_t val, uint32_t mask)
-{
- uint32_t new_val;
-
- new_val = npu2_read_4b(p, reg);
- new_val &= ~mask;
- new_val |= val & mask;
- npu2_scom_write(p->chip_id, p->xscom_base, reg, NPU2_MISC_DA_LEN_4B,
- (uint64_t)new_val << 32);
-}
-
/* Set a specific flag in the vendor config space */
void npu2_set_link_flag(struct npu2_dev *ndev, uint8_t flag)
{
diff --git a/include/npu2-regs.h b/include/npu2-regs.h
index fdaad19..cf74431 100644
--- a/include/npu2-regs.h
+++ b/include/npu2-regs.h
@@ -23,6 +23,11 @@ void npu2_write4(struct npu2 *p, uint64_t reg, uint64_t val);
uint64_t npu2_read(struct npu2 *p, uint64_t reg);
void npu2_write(struct npu2 *p, uint64_t reg, uint64_t val);
void npu2_write_mask(struct npu2 *p, uint64_t reg, uint64_t val, uint64_t mask);
+uint64_t npu2_scom_read(uint64_t gcid, uint64_t scom_base,
+ uint64_t reg, uint64_t size);
+void npu2_scom_write(uint64_t gcid, uint64_t scom_base,
+ uint64_t reg, uint64_t size,
+ uint64_t val);
/* These aren't really NPU specific registers but we initialise them in NPU
* code */
diff --git a/include/npu2.h b/include/npu2.h
index dae152a..d0c9ac5 100644
--- a/include/npu2.h
+++ b/include/npu2.h
@@ -163,4 +163,6 @@ void npu2_dev_procedure_reset(struct npu2_dev *dev);
void npu2_set_link_flag(struct npu2_dev *ndev, uint8_t flag);
void npu2_clear_link_flag(struct npu2_dev *ndev, uint8_t flag);
extern int nv_zcal_nominal;
+bool is_p9dd1(void);
+
#endif /* __NPU2_H */
--
git-series 0.9.1
More information about the Skiboot
mailing list