[Skiboot] [PATCH v7 1/9] nest data structure definitions

Madhavan Srinivasan maddy at linux.vnet.ibm.com
Tue Mar 1 21:40:25 AEDT 2016


Add the data structures and macros needed for Nest instrumentation
support by creating a new file in include/ called "nest.h".

Signed-off-by: Madhavan Srinivasan <maddy at linux.vnet.ibm.com>
---
 include/nest.h | 214 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 214 insertions(+)
 create mode 100644 include/nest.h

diff --git a/include/nest.h b/include/nest.h
new file mode 100644
index 000000000000..4fbaa41b4e0b
--- /dev/null
+++ b/include/nest.h
@@ -0,0 +1,214 @@
+/* Copyright 2016 IBM Corp.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+ * implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __NEST_H
+#define __NEST_H
+
+/*
+ * Power8 has Nest Instrumentation support with which per-chip
+ * utilisation metrics like memory bandwidth, Xlink/Alink bandwidth and
+ * many other component metrics can be obtained. These Nest
+ * counters can be programmed via scoms or HW PORE Engine,
+ * called PORE_SLW_IMA.
+ *
+ * PORE_SLW_IMA:
+ * PORE_SLW_IMA is a firmware that runs on PORE Engine.
+ * This firmware programs the nest counter and moves counter values to
+ * per chip HOMER region in a fixed offset for each unit. Engine
+ * has a control block structure for communication with Hyperviosr(Host OS).
+ *
+ * PORE -- Power On Reset Engine
+ * SLW  -- Sleep/Winkle
+ * IMA  -- In Memory Accumulation.
+ */
+
+/*
+ * Control Block structure offset in HOMER IMA Region
+ */
+#define CB_STRUCT_OFFSET	0x39FC00
+#define CB_STRUCT_CMD		0x39FC08
+#define CB_STRUCT_SPEED		0x39FC10
+#define SLW_IMA_PAUSE		0x2
+#define SLW_IMA_RESUME		0x1
+#define SLW_IMA_NOP		0
+/*
+ * Control Block Structure:
+ *
+ * Name          Producer        Consumer        Values  Desc
+ * IMARunStatus   IMA Code       Hypervisor      0       Initializing
+ *                               (Host OS)       1       Running
+ *                                               2       Paused
+ *
+ * IMACommand     Hypervisor     IMA Code        0       NOP
+ *                                               1       Resume
+ *                                               2       Pause
+ *                                               3       Clear and Restart
+ *
+ * IMACollection Hypervisor      IMA Code        0       128us
+ * Speed					 1       256us
+ *                                               2       1ms
+ *                                               3       4ms
+ *                                               4       16ms
+ *                                               5       64ms
+ *                                               6       256ms
+ *                                               7       1000ms
+ */
+struct ima_chip_cb
+{
+        u64 ima_chip_run_status;
+        u64 ima_chip_command;
+        u64 ima_chip_collection_speed;
+};
+
+/*
+ * In Memory Accumulation modes
+ */
+#define IMA_CHIP_PRODUCTION_MODE	0x1
+
+/*
+ * PORE_SLW_IMA reserved memory (in HOMER region)
+ */
+#define SLW_IMA_OFFSET		0x00320000
+#define SLW_IMA_TOTAL_SIZE	0x80000
+
+/*
+ * Counter Storage size (exposed as part of DT)
+ */
+#define SLW_IMA_SIZE		0x30000
+
+/*
+ * PTS Scoms and values
+ */
+#define IMA_PTS_SCOM		0x00068009
+#define IMA_PTS_ENABLE		0x00F0000000000000
+#define IMA_PTS_DISABLE		0x00E0000000000000
+#define IMA_PTS_START		0x1
+#define IMA_PTS_STOP		0
+#define IMA_PTS_ERROR		-1
+
+/*
+ * Catalog structures.
+ * Catalog is a meta data file provided as part of FW lid.
+ * This file contains information about the various events the
+ * HW supports under the "24x7" umbrella. Events are classified under
+ * 3 different Domains.
+ *	Domain 1  -- Chip Events (PORE_SLW_IMA)
+ *	Domain 2  -- Core Events (24x7 Core IMA)
+ *	Domain 3  -- per-Thread PMU Events
+ */
+
+#define CATALOG_MAGIC 0x32347837 /* "24x7" in ASCII */
+#define DOMAIN_CHIP	1
+#define DOMAIN_CORE	2
+
+struct nest_catalog_page_0 {
+	u32	magic;
+	u32	length; /* In 4096 byte pages */
+	u64	version;
+	u8	build_time_stamp[16]; /* "YYYYMMDDHHMMSS\0\0" */
+	u8	reserved2[32];
+	u16	schema_data_offs; /* in 4096 byte pages */
+	u16	schema_data_len; /* in 4096 byte pages */
+	u16	schema_entry_count;
+	u8	reserved3[2];
+	u16	event_data_offs;
+	u16	event_data_len;
+	u16	event_entry_count;
+	u8	reserved4[2];
+	u16	group_data_offs; /* in 4096 byte pages */
+	u16	group_data_len; /* in 4096 byte pages */
+	u16	group_entry_count;
+	u8	reserved5[2];
+	u16	formula_data_offs; /* in 4096 byte pages */
+	u16	formula_data_len; /* in 4096 byte pages */
+	u16	formula_entry_count;
+	u8	reserved6[2];
+	u32	core_event_offset;
+	u32	thread_event_offset;
+	u32	chip_event_offset;
+	u32	core_group_offset;
+	u32	thread_group_offset;
+	u32	chip_group_offset;
+} __packed;
+
+struct nest_catalog_group_data {
+	u16 length; /* in bytes, must be a multiple of 16 */
+	u8 reserved1[2];
+	u32 flags;
+	u8 domain;
+	u8 reserved2[1];
+	u16 event_group_record_start_offs;
+	u16 event_group_record_len;
+	u8 group_schema_index;
+	u8 event_count;
+	u16 event_index[16];
+	u16 group_name_len;
+	u8 remainder[1];
+} __packed;
+
+struct nest_catalog_events_data {
+	u16 length; /* in bytes, must be a multiple of 16 */
+	u16 formula_index;
+	u8 domain;
+	u8 reserved2[1];
+	u16 event_group_record_offs;
+	u16 event_group_record_len; /* in bytes */
+	u16 event_counter_offs;
+	u32 flags;
+	u16 primary_group_ix;
+	u16 group_count;
+	u16 event_name_len;
+	u8 remainder[1];
+} __packed;
+
+
+#define CHIP_EVENTS_SUPPORTED		1
+#define CHIP_EVENTS_NOT_SUPPORTED	0
+
+/*
+ * Just for optimisation, save only relevant addrs
+ */
+struct nest_catalog_desc {
+	char *catalog;
+	char *group_entry;
+	char *event_entry;
+	char *thread_event_entry;
+	char *core_event_entry;
+	char *chip_event_entry;
+	char *thread_group_entry;
+	char *core_group_entry;
+	char *chip_group_entry;
+};
+
+#define CATALOG(x)		(x)->catalog
+#define GROUP_ENTRY(x)		(x)->group_entry
+#define EVENT_ENTRY(x)		(x)->event_entry
+#define CORE_EVENT_ENTRY(x)	(x)->core_event_entry
+#define CHIP_EVENT_ENTRY(x)	(x)->chip_event_entry
+#define CORE_GROUP_ENTRY(x)	(x)->core_group_entry
+#define CHIP_GROUP_ENTRY(x)	(x)->chip_group_entry
+
+/* Size of Nest Catalog LID (256KBytes) */
+#define NEST_CATALOG_SIZE	0x40000
+
+/*
+ * Function prototypes
+ */
+int preload_catalog_lid(void);
+int load_catalog_lid(int loaded);
+void nest_pmu_init(int loaded);
+
+#endif	/* __NEST_H__ */
-- 
1.9.1



More information about the Skiboot mailing list