[Skiboot] [PATCH v2] libflash/blocklevel: Allow double ecc protecting a region

Cyril Bur cyril.bur at au1.ibm.com
Fri Jul 15 15:34:04 AEST 2016


Currently the policy for calling ECC protecting a range at the
blocklevel layer is that the requested region be completely
unprotected otherwise the call will return an error. It turns out that
duplicate calls to ffs_init() with true as the last parameter (for the
same blocklevel structure) will cause duplicate attempts to
ecc_protect() ranges.

Change the policy within blocklevel to allow duplicate protecting.
In fact the new policy almost guarantees no failure (baring something
odd like malloc() failing). It will detect that the range is currently
already fully protected and do nothing, detect that part of the range
is or is not and extend the existing range or detect that a range fits
perfectly between two ranges in which case it will merge the ranges.

Also adjust tests to match the new policy.

Signed-off-by: Cyril Bur <cyril.bur at au1.ibm.com>
---
V2: Significant rewrite, v1 was full of holes. This one should be
better
    Fixup the tests


 libflash/blocklevel.c           | 114 ++++++++++++++++++++++++++--------------
 libflash/libffs.c               |   2 +-
 libflash/test/test-blocklevel.c |  54 ++++++++++++++-----
 3 files changed, 119 insertions(+), 51 deletions(-)

diff --git a/libflash/blocklevel.c b/libflash/blocklevel.c
index 9591194..cbb9937 100644
--- a/libflash/blocklevel.c
+++ b/libflash/blocklevel.c
@@ -327,53 +327,95 @@ out_free:
 	return rc;
 }
 
-static int insert_bl_prot_range(struct blocklevel_range *ranges, struct bl_prot_range range)
+static bool insert_bl_prot_range(struct blocklevel_range *ranges, struct bl_prot_range range)
 {
-	struct bl_prot_range *new_ranges;
-	struct bl_prot_range *old_ranges = ranges->prot;
-	int i, count = ranges->n_prot;
+	int i;
+	uint32_t pos, len;
+	struct bl_prot_range *prot = ranges->prot;
 
-	/* Try to merge into an existing range */
-	for (i = 0; i < count; i++) {
-		if (!(range.start + range.len == old_ranges[i].start ||
-			  old_ranges[i].start + old_ranges[i].len == range.start))
-			continue;
+	pos = range.start;
+	len = range.len;
 
-		if (range.start + range.len == old_ranges[i].start)
-			old_ranges[i].start = range.start;
+	if (len == 0)
+		return true;
 
-		old_ranges[i].len += range.len;
+	/* Check for overflow */
+	if (pos + len < len)
+		return false;
 
-		/*
-		 * Check the inserted range isn't wedged between two ranges, if it
-		 * is, merge as well
-		 */
-		i++;
-		if (i < count && range.start + range.len == old_ranges[i].start) {
-			old_ranges[i - 1].len += old_ranges[i].len;
+	for (i = 0; i < ranges->n_prot && len > 0; i++) {
+		if (prot[i].start <= pos && prot[i].start + prot[i].len >= pos + len) {
+			len = 0;
+			break; /* Might as well, the next two conditions can't be true */
+		}
 
-			for (; i + 1 < count; i++)
-				old_ranges[i] = old_ranges[i + 1];
-			ranges->n_prot--;
+		/* Can easily extend this down just by adjusting start */
+		if (pos <= prot[i].start && pos + len >= prot[i].start) {
+			prot[i].len += prot[i].start - pos;
+			prot[i].start = pos;
+			pos += prot[i].len;
+			if (prot[i].len >= len)
+				len = 0;
+			else
+				len -= prot[i].len;
 		}
 
-		return 0;
+		/*
+		 * Jump over this range but the new range might be so big that
+		 * theres a chunk after
+		 */
+		if (pos >= prot[i].start && pos < prot[i].start + prot[i].len) {
+			if (prot[i].start + prot[i].len - pos > len) {
+				len -= prot[i].start + prot[i].len - pos;
+				pos = prot[i].start + prot[i].len;
+			} else {
+				len = 0;
+			}
+		}
+		/*
+		 * This condition will be true if the range is smaller than
+		 * the current range, therefore it should go here!
+		 */
+		if (pos < prot[i].start && pos + len <= prot[i].start)
+			break;
 	}
 
-	if (ranges->n_prot == ranges->total_prot) {
-		new_ranges = realloc(ranges->prot, sizeof(range) * ((ranges->n_prot) + PROT_REALLOC_NUM));
-		if (new_ranges)
+	if (len) {
+		int insert_pos = i;
+		struct bl_prot_range *new_ranges = ranges->prot;
+		if (ranges->n_prot == ranges->total_prot) {
+			new_ranges = realloc(ranges->prot,
+					sizeof(range) * ((ranges->n_prot) + PROT_REALLOC_NUM));
+			if (!new_ranges)
+				return false;
 			ranges->total_prot += PROT_REALLOC_NUM;
-	} else {
-		new_ranges = old_ranges;
-	}
-	if (new_ranges) {
-		memcpy(new_ranges + ranges->n_prot, &range, sizeof(range));
+		}
+		if (insert_pos != ranges->n_prot)
+			for (i = ranges->n_prot; i > insert_pos; i--)
+				memcpy(&new_ranges[i], &new_ranges[i - 1], sizeof(range));
+		range.start = pos;
+		range.len = len;
+		memcpy(&new_ranges[insert_pos], &range, sizeof(range));
 		ranges->prot = new_ranges;
 		ranges->n_prot++;
 	}
 
-	return !new_ranges;
+	/* Probably only worth mergeing when we're low on space */
+	if (ranges->n_prot + 1 == ranges->total_prot) {
+		/* Check to see if we can merge ranges */
+		for (i = 0; i < ranges->n_prot - 1; i++) {
+			if (prot[i].start + prot[i].len == prot[i + 1].start) {
+				int j;
+				prot[i].len += prot[i + 1].len;
+				for (j = i + 1; j < ranges->n_prot - 1; j++)
+					memcpy(&prot[j] , &prot[j + 1], sizeof(range));
+				ranges->n_prot--;
+				i--; /* Maybe the next one can merge too */
+			}
+		}
+	}
+
+	return true;
 }
 
 int blocklevel_ecc_protect(struct blocklevel_device *bl, uint32_t start, uint32_t len)
@@ -385,11 +427,7 @@ int blocklevel_ecc_protect(struct blocklevel_device *bl, uint32_t start, uint32_
 	 */
 	struct bl_prot_range range = { .start = start, .len = len };
 
-	/*
-	 * Refuse to add regions that are already protected or are partially
-	 * protected
-	 */
-	if (len < BYTES_PER_ECC || ecc_protected(bl, start, len))
+	if (len < BYTES_PER_ECC)
 		return -1;
-	return insert_bl_prot_range(&bl->ecc_prot, range);
+	return !insert_bl_prot_range(&bl->ecc_prot, range);
 }
diff --git a/libflash/libffs.c b/libflash/libffs.c
index 8134962..97b48c4 100644
--- a/libflash/libffs.c
+++ b/libflash/libffs.c
@@ -194,7 +194,7 @@ int ffs_init(uint32_t offset, uint32_t max_size, struct blocklevel_device *bl,
 			if (ecc) {
 				rc = blocklevel_ecc_protect(bl, start, total_size);
 				if (rc) {
-					FL_ERR("Failed to blocklevel_ecc_protect(0x%08x, 0x%08x)\n",
+					FL_ERR("FFS: Failed to blocklevel_ecc_protect(0x%08x, 0x%08x)\n",
 					       start, total_size);
 					goto out;
 				}
diff --git a/libflash/test/test-blocklevel.c b/libflash/test/test-blocklevel.c
index ef5d9b5..9630939 100644
--- a/libflash/test/test-blocklevel.c
+++ b/libflash/test/test-blocklevel.c
@@ -44,6 +44,10 @@ int main(void)
 		ERR("Failed to blocklevel_ecc_protect(0x3000, 0x1000)\n");
 		return 1;
 	}
+	if (blocklevel_ecc_protect(bl, 0x2f00, 0x1100)) {
+		ERR("Failed to blocklevel_ecc_protect(0x2f00, 0x1100)\n");
+		return 1;
+	}
 
 	/* Zero length protection */
 	if (!blocklevel_ecc_protect(bl, 0x4000, 0)) {
@@ -58,14 +62,20 @@ int main(void)
 	}
 
 	/* Deal with overlapping protections */
-	if (!blocklevel_ecc_protect(bl, 0x100, 0x1000)) {
-		ERR("Shouldn't have succeeded blocklevel_ecc_protect(0x100, 0x1000)\n");
+	if (blocklevel_ecc_protect(bl, 0x100, 0x1000)) {
+		ERR("Failed to protect overlaping region blocklevel_ecc_protect(0x100, 0x1000)\n");
+		return 1;
+	}
+
+	/* Deal with overflow */
+	if (!blocklevel_ecc_protect(bl, 1, 0xFFFFFFFF)) {
+		ERR("Added an 'overflow' protection blocklevel_ecc_protect(1, 0xFFFFFFFF)\n");
 		return 1;
 	}
 
-	/* Deal with protections greater than max size */
-	if (!blocklevel_ecc_protect(bl, 0, 0xFFFFFFFF)) {
-		ERR("Failed to blocklevel_ecc_protect(0, 0xFFFFFFFF)\n");
+	/* Protect everything */
+	if (blocklevel_ecc_protect(bl, 0, 0xFFFFFFFF)) {
+		ERR("Couldn't protect everything blocklevel_ecc_protect(0, 0xFFFFFFFF)\n");
 		return 1;
 	}
 
@@ -84,17 +94,30 @@ int main(void)
 		return 1;
 	}
 
-	if (ecc_protected(bl, 0x1000, 0) != 0) {
+	/* Clear the protections */
+	bl->ecc_prot.n_prot = 0;
+	/* Reprotect */
+	if (blocklevel_ecc_protect(bl, 0x3000, 0x1000)) {
+		ERR("Failed to blocklevel_ecc_protect(0x3000, 0x1000)\n");
+		return 1;
+	}
+	/* Deal with overlapping protections */
+	if (blocklevel_ecc_protect(bl, 0x100, 0x1000)) {
+		ERR("Failed to protect overlaping region blocklevel_ecc_protect(0x100, 0x1000)\n");
+		return 1;
+	}
+
+	if (ecc_protected(bl, 0x1000, 0) != 1) {
 		ERR("Invalid result for ecc_protected(0x1000, 0)\n");
 		return 1;
 	}
 
-	if (ecc_protected(bl, 0x1000, 0x1000) != 0) {
+	if (ecc_protected(bl, 0x1000, 0x1000) != -1) {
 		ERR("Invalid result for ecc_protected(0x1000, 0x1000)\n");
 		return 1;
 	}
 
-	if (ecc_protected(bl, 0x1000, 0x100) != 0) {
+	if (ecc_protected(bl, 0x1000, 0x100) != 1) {
 		ERR("Invalid result for ecc_protected(0x1000, 0x100)\n");
 		return 1;
 	}
@@ -104,7 +127,7 @@ int main(void)
 		return 1;
 	}
 
-	if (ecc_protected(bl, 0x4000, 1) != 1) {
+	if (ecc_protected(bl, 0x4000, 1) != 0) {
 		ERR("Invalid result for ecc_protected(0x4000, 1)\n");
 		return 1;
 	}
@@ -136,6 +159,11 @@ int main(void)
 		return 1;
 	}
 
+	if (blocklevel_ecc_protect(bl, 0x4f00, 0x100)) {
+		ERR("Failed to blocklevel_ecc_protected(0x4900, 0x100)\n");
+		return 1;
+	}
+
 	if (blocklevel_ecc_protect(bl, 0x4900, 0x100)) {
 		ERR("Failed to blocklevel_ecc_protected(0x4900, 0x100)\n");
 		return 1;
@@ -146,8 +174,8 @@ int main(void)
 		return 1;
 	}
 
-	if (!blocklevel_ecc_protect(bl, 0x5290, 0x10)) {
-		ERR("Shouldn't have been able to blocklevel_ecc_protect(0x5290, 0x10)\n");
+	if (blocklevel_ecc_protect(bl, 0x5290, 0x10)) {
+		ERR("Failed to blocklevel_ecc_protect(0x5290, 0x10)\n");
 		return 1;
 	}
 
@@ -166,7 +194,9 @@ int main(void)
 		ERR("Failed to blocklevel_ecc_protect(0x6100, 0x100)\n");
 		return 1;
 	}
-
+	/* Make sure we trigger the merging code */
+	for (i = bl->ecc_prot.n_prot; i < bl->ecc_prot.total_prot; i++)
+		blocklevel_ecc_protect(bl, 0x10000 + i * 0x200, 0x10);
 	/* Check that the region merging works */
 	for (i = 0; i < bl->ecc_prot.n_prot - 1; i++) {
 		if (bl->ecc_prot.prot[i].start + bl->ecc_prot.prot[i].len == bl->ecc_prot.prot[i + 1].start ||
-- 
2.9.0



More information about the Skiboot mailing list