[Skiboot] [RFC PATCH 05/10] core/test: add a console flushing test

[Oliver O'Halloran]

Adds a test to verify that flushing the console buffer works properly.

Signed-off-by: Oliver O'Halloran <oohall at gmail.com>
---
 core/test/run-console-flush.c | 138 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 138 insertions(+)
 create mode 100644 core/test/run-console-flush.c

diff --git a/core/test/run-console-flush.c b/core/test/run-console-flush.c
new file mode 100644
index 000000000000..51451fde4030
--- /dev/null
+++ b/core/test/run-console-flush.c
@@ -0,0 +1,138 @@
+/* Copyright 2016 IBM Corp.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * 	http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+ * implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <config.h>
+#include <stdlib.h>
+#include <string.h>
+#include <assert.h>
+#include <stdarg.h>
+#include <stdbool.h>
+
+#include <sys/uio.h>
+#include <sys/socket.h>
+#include <sys/types.h>
+
+#define __TEST__
+#define _printf printf
+
+#if 0
+#define smt_very_low()
+#define smt_low()
+#define smt_medium()
+#define smt_high()
+#endif
+#define lwsync()
+
+/* fake out the timebase sett */
+unsigned long tb_hz = 512000000;
+
+static inline unsigned long mftb(void)
+{
+	return 0;
+}
+
+int _printf(const char *fmt, ...);
+
+static struct debug_descriptor debug_descriptor;
+
+#include "../console.c"
+#include "../console-log.c"
+
+int flush_buffer_offset = 0;
+static bool flushed_to_drivers = false;
+static char flush_buffer[65536];
+static char console_buffer[65536];
+
+/*
+ * Inside skiboot we have our own write() function that breaks
+ * the normal stdlib write(). We can use writev() instead though
+ */
+static size_t unix_write(int fd, const char *buf, size_t len)
+{
+	struct iovec iov = {(void *)buf, len};
+
+	return writev(fd, &iov, 1);
+}
+
+/* For debugging I usually hack in some mambo_printfs
+ * this implements the backend for the test */
+size_t mambo_console_write(const char *buf, size_t count)
+{
+	return unix_write(2, buf, count);
+}
+
+static size_t flush_write(const char *buf, size_t len)
+{
+	memcpy(flush_buffer + flush_buffer_offset, buf, len);
+
+	flush_buffer_offset += len;
+	flush_buffer_offset %= sizeof(flush_buffer);
+
+	return len;
+}
+
+static struct con_ops unix_con = {
+	.write = flush_write,
+};
+
+static void populate_console(int mem_lvl, int flush_lvl)
+{
+	int i;
+
+	memset(console_buffer, 0, sizeof(console_buffer));
+	con_in = 0;
+	con_out = 0;
+
+	debug_descriptor.console_log_levels = (mem_lvl << 4) | flush_lvl;
+
+	for (i = 0; i < 20; i++)
+		prlog(i % (PR_INSANE + 1), "Hello World! %d\r\n", i);
+}
+
+int main(void)
+{
+	int ret;
+
+	this_cpu()->con_suspend = false;
+	set_console(&unix_con);
+
+	/* fix up the console globals */
+	flushed_to_drivers = false;
+	con_buf = console_buffer;
+	memcons.obuf_phys = (uint64_t) console_buffer;
+	memcons.obuf_size = sizeof(console_buffer);
+
+	populate_console(PR_INSANE, PR_NOTICE);
+	__flush_console(true);
+
+	/*
+	 * Refill the console buffer dropping everything above PR_NOTICE
+	 * The contents of the flushed and the refilled buffer should
+	 * be identical.
+	 */
+	set_console(NULL); /* prevent writes into flush_buffer */
+	populate_console(PR_NOTICE, 0);
+
+	ret = memcmp(flush_buffer, console_buffer, con_in);
+	if (ret) {
+		unix_write(2, "=========\n", sizeof("=========\n") - 1);
+		unix_write(2, console_buffer, strlen(console_buffer));
+		unix_write(2, "=========\n", sizeof("=========\n") - 1);
+		unix_write(2, flush_buffer, strlen(flush_buffer));
+	}
+
+	return ret;
+}
-- 
2.7.4