[Skiboot] [PATCH v3 05/10] console: move mambo con_ops into the platform
Oliver O'Halloran
oohall at gmail.com
Wed Dec 21 15:52:27 AEDT 2016
There's no need for this to be in the skiboot core console code. Also do
a few cleanups while we're shovling code around.
Signed-off-by: Oliver O'Halloran <oohall at gmail.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan at au1.ibm.com>
---
v2 -> v3:
Removed redundant functions
---
core/console.c | 42 ---------------------------
include/console.h | 3 +-
platforms/mambo/Makefile.inc | 2 +-
platforms/mambo/console.c | 68 ++++++++++++++++++++++++++++++++++++++++++++
platforms/mambo/mambo.c | 10 -------
5 files changed, 70 insertions(+), 55 deletions(-)
create mode 100644 platforms/mambo/console.c
diff --git a/core/console.c b/core/console.c
index 10f105d437fe..bb0bdef13f7d 100644
--- a/core/console.c
+++ b/core/console.c
@@ -61,48 +61,6 @@ void force_dummy_console(void)
NULL, 0);
}
-
-static int mambo_char = -1;
-
-static bool mambo_con_poll_read(void)
-{
- if (mambo_char < 0)
- mambo_char = mambo_console_read();
- return mambo_char >= 0;
-}
-
-static size_t mambo_con_read(char *buf, size_t len)
-{
- size_t count = 0;
-
- while(count < len) {
- if (!mambo_con_poll_read())
- break;
- *(buf++) = mambo_char;
- mambo_char = -1;
- count++;
- }
- return count;
-}
-
-static size_t mambo_con_write(const char *buf, size_t len)
-{
- mambo_console_write(buf, len);
- return len;
-}
-
-static struct con_ops mambo_con_driver = {
- .poll_read = mambo_con_poll_read,
- .read = mambo_con_read,
- .write = mambo_con_write,
-};
-
-void enable_mambo_console(void)
-{
- prlog(PR_NOTICE, "Enabling Mambo console\n");
- set_console(&mambo_con_driver);
-}
-
/*
* Helper function for adding /ibm,opal/consoles/serial@<xyz> nodes
*/
diff --git a/include/console.h b/include/console.h
index 6a80bef96c7a..08d2961e527a 100644
--- a/include/console.h
+++ b/include/console.h
@@ -61,8 +61,7 @@ extern void set_console(struct con_ops *driver);
extern void console_complete_flush(void);
-extern int mambo_console_read(void);
-extern void mambo_console_write(const char *buf, size_t count);
+extern size_t mambo_console_write(const char *buf, size_t count);
extern void enable_mambo_console(void);
ssize_t console_write(bool flush_to_drivers, const void *buf, size_t count);
diff --git a/platforms/mambo/Makefile.inc b/platforms/mambo/Makefile.inc
index 2cc86136dc71..f3023ef0194d 100644
--- a/platforms/mambo/Makefile.inc
+++ b/platforms/mambo/Makefile.inc
@@ -1,6 +1,6 @@
SUBDIRS += $(PLATDIR)/mambo
-MAMBO_OBJS = mambo.o
+MAMBO_OBJS = mambo.o console.o
MAMBO = $(PLATDIR)/mambo/built-in.o
$(MAMBO): $(MAMBO_OBJS:%=$(PLATDIR)/mambo/%)
diff --git a/platforms/mambo/console.c b/platforms/mambo/console.c
new file mode 100644
index 000000000000..c7d7ab030c30
--- /dev/null
+++ b/platforms/mambo/console.c
@@ -0,0 +1,68 @@
+/* Copyright 2016 IBM Corp.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+ * implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <skiboot.h>
+#include <console.h>
+
+#include "mambo.h"
+
+/*
+ * The SIM_READ_CONSOLE callout will return -1 if there is no character to read.
+ * There's no explicit poll callout so we "poll" by doing a read and stashing
+ * the result until we do an actual read.
+ */
+static int mambo_char = -1;
+
+static bool mambo_console_poll(void)
+{
+ if (mambo_char < 0)
+ mambo_char = callthru0(SIM_READ_CONSOLE_CODE);
+
+ return mambo_char >= 0;
+}
+
+static size_t mambo_console_read(char *buf, size_t len)
+{
+ size_t count = 0;
+
+ while (count < len) {
+ if (!mambo_console_poll())
+ break;
+
+ buf[count++] = mambo_char;
+ mambo_char = -1;
+ }
+
+ return count;
+}
+
+size_t mambo_console_write(const char *buf, size_t len)
+{
+ callthru2(SIM_WRITE_CONSOLE_CODE, (unsigned long)buf, len);
+ return len;
+}
+
+static struct con_ops mambo_con_driver = {
+ .poll_read = mambo_console_poll,
+ .read = mambo_console_read,
+ .write = mambo_console_write,
+};
+
+void enable_mambo_console(void)
+{
+ prlog(PR_NOTICE, "Enabling Mambo console\n");
+ set_console(&mambo_con_driver);
+}
diff --git a/platforms/mambo/mambo.c b/platforms/mambo/mambo.c
index a5788b872585..807931392bf0 100644
--- a/platforms/mambo/mambo.c
+++ b/platforms/mambo/mambo.c
@@ -211,16 +211,6 @@ static void mambo_rtc_init(void)
opal_register(OPAL_RTC_READ, mambo_rtc_read, 2);
}
-int mambo_console_read(void)
-{
- return callthru0(SIM_READ_CONSOLE_CODE);
-}
-
-void mambo_console_write(const char *buf, size_t count)
-{
- callthru2(SIM_WRITE_CONSOLE_CODE, (unsigned long)buf, count);
-}
-
static void mambo_platform_init(void)
{
force_dummy_console();
--
2.7.4
More information about the Skiboot
mailing list