[Skiboot-stable] [Skiboot] [PATCH v7 1/3] include/ipmi: Fix incorrect chassis commands

[Oliver]

On Thu, May 9, 2019 at 1:09 PM Samuel Mendoza-Jonas
<sam at mendozajonas.com> wrote:
>
> These commands are listed in the order they appear in the IPMI
> specification but with the wrong values - correct them!
>
> Signed-off-by: Samuel Mendoza-Jonas <sam at mendozajonas.com>
> Reviewed-by: Andrew Jeffery <andrew at aj.id.au>

Thanks, series merged to master as v6.3-3-gbc2b1de3beb2

> ---
>  include/ipmi.h | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/include/ipmi.h b/include/ipmi.h
> index 4999bb5a..da85c4b0 100644
> --- a/include/ipmi.h
> +++ b/include/ipmi.h
> @@ -47,13 +47,13 @@
>  #define IPMI_CHASSIS_CONTROL_CMD               0x02
>  #define IPMI_CHASSIS_RESET_CMD                 0x03
>  #define IPMI_CHASSIS_IDENTIFY_CMD              0x04
> -#define IPMI_CHASSIS_SET_PANEL_BUTTON_EN_CMD   0x05
> -#define IPMI_CHASSIS_SET_CAP_CMD               0x06
> -#define IPMI_CHASSIS_SET_PWR_RESTORE_CMD       0x07
> -#define IPMI_CHASSIS_SET_PWR_CYCLE_CMD         0x08
> -#define IPMI_CHASSIS_GET_SYS_RESTART_CAUSE_CMD 0x09
> -#define IPMI_CHASSIS_SET_SYS_BOOT_OPT_CMD      0x0a
> -#define IPMI_CHASSIS_GET_SYS_BOOT_OPT_CMD      0x0b
> +#define IPMI_CHASSIS_SET_PANEL_BUTTON_EN_CMD   0x0a
> +#define IPMI_CHASSIS_SET_CAP_CMD               0x05
> +#define IPMI_CHASSIS_SET_PWR_RESTORE_CMD       0x06
> +#define IPMI_CHASSIS_SET_PWR_CYCLE_CMD         0x0b
> +#define IPMI_CHASSIS_GET_SYS_RESTART_CAUSE_CMD 0x07
> +#define IPMI_CHASSIS_SET_SYS_BOOT_OPT_CMD      0x08
> +#define IPMI_CHASSIS_GET_SYS_BOOT_OPT_CMD      0x09
>  #define IPMI_CHASSIS_GET_POH_COUNTER_CMD       0x0f
>
>
> --
> 2.21.0
>
> _______________________________________________
> Skiboot mailing list
> Skiboot at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/skiboot