[rhype] error booting 2.6.11

[Sushant Sharma]

Muli Ben-Yehuda wrote:

> I can't test it right now, but lboot is CVS is missing the hack to
> limit initial memory to 64MB. Sushant, you might want to try this
> patch:

:) it seems to work...but i'm not sure i understand what should be the 
next step.

here is the output

 >Choice [1]: 01
 >Got command: 01
 > 3
 > load_image: copying bits from lboot_boot: to 0x4100000[0x4001ac]
 > Copying partition img: 0x18cadc[0x4001ac] -> 0x4100000
 > Creating partition
 > Created partition  ID 4098
 >   starting it @ pc = 0x100000.
 >   Scheduled 0x1002: rot: 0 (0x0000000000000003, 0x0000000000000003 
0x0000000000000002)
 >   Building device entries for partition 0x1002
 >   insert prop image @: 0x3f00000, 0x900
 >   Copying partition img: 0x5d2e20[0x900] -> 0x7f00000
 >   launch_partition: yielding to sysId: 0x1002 now
 >   launch_partition: back from yielding to sysId: 0x1002

and then i'm again in the menu for choosing images...what to do from here?

and in the terminal from which i launched thinwire, this was output

 > activating thinwire
 >   **thinw./thinwire3: Got initialization string. 2 8 6.
    ire**
 >   CPUID: processor 0xf24, features 0x3febfbff
 >   Page allocator space: 0xfc1a5000 - 0xfc734fff, 0xfc735000 - 0xffffffff
 >   Page allocator marked used: 0xfc263000 - 0xfc734fff
 >   PIC init
 >   Assigned memory PA:0x4000000[0x18000000] -> LA:0x0
 >   arch_os_thread: thread lpid 0x1001, cr3 0x262000
 >   About to resume into controller ...
 >   Rescinding 0x300001
 >   Rescinding 0x300003
 >   arch_os_thread: thread lpid 0x1002, cr3 0x303000

Thanks
-Sushant