[OpenPower-Firmware] eSEL parser for P9

[Artem Senichev]

On Thu, Jul 25, 2019 at 2:17 PM Amit J Tendolkar <amit.tendolkar at in.ibm.com>
wrote:

> Hi All
>
> Sampa (in CC) has a tool in the works which she had already piloted and is
> supposed to do the magic to enable the latest ffdc parsers in errl in the
> op build world.
> I had a short discussion with her she has plans to push that to github
> sometime, which should do the trick.
>

It would be nice--
Regards,
Artem Senichev
Software Engineer, YADRO.. I have been wanting to integrate errl with
OpenBMC.


>
> She can also help with a temporary image if case its needed urgently.
> Please share the platform for which you need the errl utility and Sampa
> should be able to help with that.
>

I would be grateful if you share the errl utility for Romulus machine.
Our platform based on its reference design.


>
> Thanks
> Best Regards,
> Amit
> _______________________________________________
> Amit Tendolkar
> POWER Firmware Development
> IBM Systems & Technology Group
> Systems Software Development
>
> IBM India Private Limited
> G Floor, D2 Block, Manyata Embassy Business Park
> Nagwara, Outer Ring Road, Bangalore - 560 045 INDIA
>
> Phone: +91 80 406-39849
> Fax: +91-80-254 36903
> E-mail: amit.tendolkar at in.ibm.com
>
>
>
> ----- Original message -----
> From: Adrian Barrera/Austin/IBM
> To: Daniel M Crowell/Rochester/IBM at IBMUS
> Cc: artemsen at gmail.com, Hank CH Chang/Taiwan/IBM at IBMTW, Sampa
> Misra1/India/IBM at IBMIN, openpower-firmware at lists.ozlabs.org,
> stewart at linux.ibm.com, Amit J Tendolkar/India/IBM at IBMIN
> Subject: Re: [OpenPower-Firmware] eSEL parser for P9
> Date: Wed, Jul 24, 2019 9:47 PM
>
> No, I checked with the RAS team and only the source is available but not
> the prebuilt binary.
>
> I'm told Amit inherited the tool from Venkatesh, so hopefully he can
> provide the instructions. If nothing else, I can pull the binary from our
> Romulus CI builds and forward it along.
>
> Regards,
>
>
> *Adrián Barrera*
> OpenPOWER Chief Engineer
> IBM Systems
>
> ------------------------------
> Phone: 1-512-286-5249 | Tie-Line: 363-5249 | Mobile: 1-956-501-0817
> E-mail: abarrera at us.ibm.com
>
> [image: IBM]
>
> 11400 Burnet Rd
> Austin, TX 78758-3493
> United States
>
>
>
> ----- Original message -----
> From: Daniel M Crowell/Rochester/IBM
> To: "Stewart Smith" <stewart at linux.ibm.com>
> Cc: "Artem Senichev" <artemsen at gmail.com>, chhank at tw.ibm.com,
> openpower-firmware at lists.ozlabs.org, Sampa Misra1/India/IBM at IBMIN, Adrian
> Barrera/Austin/IBM at IBMUS
> Subject: Re: [OpenPower-Firmware] eSEL parser for P9
> Date: Tue, Jul 23, 2019 11:34 PM
>
> I wish I did.  I don't know how to build it externally either.  I think
> that Sampa is the one driving this now.  The last I heard there was
> supposed to be an op-build trigger to do this but it looks like it never
> got done.
>
> Adrian - Do you know of any public repositories that contain a prebuilt
> errl for P9?
> --
> Dan Crowell
> Senior Software Engineer - Power Systems Enablement Firmware
> IBM Rochester: t/l 553-2987
> dcrowell at us.ibm.com
>
> [image: Inactive hide details for "Stewart Smith" ---07/23/2019 08:49:49
> PM---Dan - do you know the magic here? Artem Senichev <artemse]"Stewart
> Smith" ---07/23/2019 08:49:49 PM---Dan - do you know the magic here? Artem
> Senichev <artemsen at gmail.com> writes:
>
> From: "Stewart Smith" <stewart at linux.ibm.com>
> To: "Artem Senichev" <artemsen at gmail.com>,
> openpower-firmware at lists.ozlabs.org, Daniel M Crowell/Rochester/IBM at IBMUS
> Cc: chhank at tw.ibm.com
> Date: 07/23/2019 08:49 PM
> Subject: Re: [OpenPower-Firmware] eSEL parser for P9
> ------------------------------
>
>
>
> Dan - do you know the magic here?
>
> Artem Senichev <artemsen at gmail.com> writes:
> > Hi all,
> >
> > We bringup our new server - Nicole, it's a P9 Romulus based machine.
> > One of the problems I encountered is the analysis of errors
> > generated by hostboot.
> >
> > For P8 servers, we use the `errl` utility to parse eSEL. Some time
> > ago I received this tool from IBM as a binary file for the i386
> > platform. Of course, this version is not intended for use with the
> > P9, many fields are not parsed completely (I get 'Unrecognized FFDC').
> >
> > I have built tools from https://github.com/open-power/errl and
> > https://github.com/open-power/libopalevents, but these programs give
> > me a general description only. As I understood, I need to compile
> > `errl` with plugin support to get human readable attribute values.
> > But there is no any documentation how to do it.
> >
> > Can anyone share secret knowledge how can I build `errl` to use it
> > for our P9 machine?
> > Or, may be there is exist a prebuilt binary tool that you use for
> > Romulus?
> >
> > --
> > Regards,
> > Artem Senichev
> > Software Engineer, YADRO.
> > _______________________________________________
> > OpenPower-Firmware mailing list
> > OpenPower-Firmware at lists.ozlabs.org
> > https://lists.ozlabs.org/listinfo/openpower-firmware
> >
>
> --
> Stewart Smith
> OPAL Architect, IBM.
>
>
>
>
> --
> Regards,
> Artem Senichev
> Software Engineer, YADRO.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openpower-firmware/attachments/20190726/75da056a/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Image.15639800157861.png
Type: image/png
Size: 5093 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/openpower-firmware/attachments/20190726/75da056a/attachment-0001.png>