[PATCH] ARM: dts: aspeed: Add dts for ASUS Kommando IPMI card

[Anirudh Srinivasan]

Helo Andrew,

After doing some more reading and experimentation, I think I might
have a clearer understanding of how things work.

Andrew Lunn's suggestion in the patch series from Aspeed was to patch
u-boot to not insert clock delays anymore. And then use rgmii-id as
the phy mode in u-boot and linux for all new device trees.

I tested this by setting the mac2 clk delays to 0 in the u-boot device
tree like this

&scu {
    mac2-clk-delay = <0 0
              0 0
              0 0>;
};

Setting the phy-mode to rgmii-id now gives us working networking in
u-boot and linux.

So how do you suggest we proceed here?
1. Add this DT to u-boot now, set phy mode to rgmii-id and set
mac2-clk-delay values to 0. Networking will work in u-boot and linux.
Update the DT to remove the clk delay values once Aspeed updates
u-boot
2. Add this DT to u-boot now. set phy mode to rgmii-id. This means
networking won't work in u-boot, but it works once you're in linux
3. Add this DT to u-boot now without networking. Add networking later
when Aspeed updates u-boot based on the discussion in that thread.
3. Wait for aspeed to update u-boot, then add this DT to u-boot.

In any of these cases, we can also now add networking to the linux DT
for this card (it's missing currently) with phy-mode set to rgmii-id.
No need to wait for Aspeed to update the linux driver (or I think
they're not gonna make any updates at all if it's just u-boot that
needs fixing).

Let me know what you think (or if I've gotten any info incorrect here).

Regards
Anirudh Srinivasan