[PATCH v2 0/2] gpio: cadence: Add Axiado AX3000 support and edge interrupts

[Bartosz Golaszewski]

On Fri, 09 Jan 2026 01:26:05 -0800, Swark Yang wrote:
> This patch series updates the gpio-cadence driver to support the Axiado
> AX3000 platform and extends its interrupt capabilities.
> 
> On the Axiado AX3000 platform, pinmux and pin configuration (such as
> direction and output enable) are configured by the hardware/firmware at
> boot time before Linux boots. To support this architecture, this series
> introduces a platform-specific quirk to skip default pin initialization
> during the probe sequence, preserving the pre-boot configuration.
> 
> [...]

Applied, thanks!

[1/2] gpio: cadence: Add quirk for Axiado AX3000 platform
      commit: ea5b4c68e097412f2d3ca13314b672837718a446
[2/2] gpio: cadence: Add support for edge-triggered interrupts
      commit: 43f37d44f2b8a75a896e218bac1e43d75063f8d3

Best regards,
-- 
Bartosz Golaszewski <bartosz.golaszewski at oss.qualcomm.com>