[PATCH v20 1/4] dt-bindings: i2c: Split AST2600 binding into a new YAML

[Krzysztof Kozlowski]

On 29/10/2025 09:29, Ryan Chen wrote:
>> Subject: Re: [PATCH v20 1/4] dt-bindings: i2c: Split AST2600 binding into a new
>> YAML
>>
>> On 21/10/2025 03:35, Ryan Chen wrote:
>>> The AST2600 I2C controller is a new hardware design compared to the
>>> I2C controllers in previous ASPEED SoCs (e.g., AST2400, AST2500).
>>>
>>> It introduces new features such as:
>>>  - A redesigned register layout
>>>  - Separation between controller and target mode registers
>>>  - Transfer mode selection (byte, buffer, DMA)
>>>  - Support for a shared global register block for configuration
>>>
>>> Due to these fundamental differences, maintaining a separate
>>> devicetree binding file for AST2600 helps to clearly distinguish the
>>> hardware capabilities and configuration options from the older
>>> controllers.
>>>
>>> Signed-off-by: Ryan Chen <ryan_chen at aspeedtech.com>
>>> ---
>>>  .../devicetree/bindings/i2c/aspeed,i2c.yaml   |  3 +-
>>>  .../devicetree/bindings/i2c/ast2600-i2c.yaml  | 66
>>> +++++++++++++++++++
>>>  2 files changed, 67 insertions(+), 2 deletions(-)  create mode 100644
>>> Documentation/devicetree/bindings/i2c/ast2600-i2c.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
>>> b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
>>> index 5b9bd2feda3b..d4e4f412feba 100644
>>> --- a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
>>> +++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
>>> @@ -4,7 +4,7 @@
>>>  $id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
>>>  $schema: http://devicetree.org/meta-schemas/core.yaml#
>>>
>>> -title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs
>>> +title: ASPEED I2C on the AST24XX, AST25XX SoCs
>>>
>>>  maintainers:
>>>    - Rayn Chen <rayn_chen at aspeedtech.com> @@ -17,7 +17,6 @@
>>> properties:
>>>      enum:
>>>        - aspeed,ast2400-i2c-bus
>>>        - aspeed,ast2500-i2c-bus
>>> -      - aspeed,ast2600-i2c-bus
>>>
>>>    reg:
>>>      minItems: 1
>>> diff --git a/Documentation/devicetree/bindings/i2c/ast2600-i2c.yaml
>>> b/Documentation/devicetree/bindings/i2c/ast2600-i2c.yaml
>>
>> Why completely breaking naming? Please follow writing bindings carefully.
> 
> Will update 
> $id: "http://devicetree.org/schemas/i2c/aspeed,ast2600-i2c.yaml#"
>>
>>> new file mode 100644
>>> index 000000000000..6ddcec5decdc
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/i2c/ast2600-i2c.yaml
>>> @@ -0,0 +1,66 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/i2c/ast2600-i2c.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: ASPEED I2C on the AST26XX SoCs
>>> +
>>> +maintainers:
>>> +  - Ryan Chen <ryan_chen at aspeedtech.com>
>>> +
>>> +allOf:
>>> +  - $ref: /schemas/i2c/i2c-controller.yaml#
>>> +
>>> +properties:
>>> +  compatible:
>>> +    enum:
>>> +      - aspeed,ast2600-i2c-bus
>>> +
>>> +  reg:
>>> +    minItems: 1
>>
>> Why?
> 
> Will update as following.
> 
> reg:
>   minItems: 1
>   maxItems: 2


No. You changed nothing. Instead explain why this is flexible.

See writing bindings.


...


>>> +  bus-frequency:
>>> +    minimum: 500
>>> +    maximum: 4000000
>>> +    default: 100000
>>> +    description: frequency of the bus clock in Hz defaults to 100 kHz when
>> not
>>> +      specified
>>
>> Don't repeat constraints in free form text.
> 
> Will update
> clock-frequency:
>     description: Desired I2C bus frequency in Hz
>     default: 100000

Heh? You are making random set of changes like did not really read the
feedback. I not to repeat something. What is repeated? Constraints.
Where are the repeated "in free form text". What did you do? Dropped
constraints.

I don't know what to say.

Best regards,
Krzysztof