[PATCH v2 0/1] i2c: npcm: Add clock toggle recovery

[Mukesh Kumar Savaliya]

On 3/25/2025 2:28 AM, mohammed.0.elbadry at gmail.com wrote:
> From: Tali Perry <tali.perry1 at gmail.com>
> 
> Hi,
> 
> During init of the bus, the module checks that the bus is idle.
> If one of the lines are stuck try to toggle them first.
> 
As such there is one file change and single patch. You may go ahead 
without cover-letter. Just my thought.
> Fixes: 76487532f797 (i2c: npcm: Add slave enable/disable function)
> Signed-off-by: Tali Perry <tali.perry1 at gmail.com>
> Signed-off-by: Mohammed Elbadry <mohammed.0.elbadry at gmail.com>
> ---
> 
> Tali Perry (1):
>    i2c: npcm: Add clock toggle recovery
> 
>   drivers/i2c/busses/i2c-npcm7xx.c | 12 ++++++++----
>   1 file changed, 8 insertions(+), 4 deletions(-)
>