[PATCH v1 2/2] arm64: dts: nuvoton: npcm845-evb: Add peripheral nodes
Tomer Maimon
tmaimon77 at gmail.com
Thu Jul 17 23:53:36 AEST 2025
Enable peripheral support for the Nuvoton NPCM845 Evaluation Board by
adding device nodes for Ethernet controllers, MMC controller, SPI
controllers, USB device controllers, random number generator, ADC,
PWM-FAN controller, I2C controllers, and PECI interface.
Include MDIO nodes for Ethernet PHYs, reserved memory for TIP, and
aliases for device access.
This patch enhances functionality for NPCM845-EVB platform.
Signed-off-by: Tomer Maimon <tmaimon77 at gmail.com>
---
.../boot/dts/nuvoton/nuvoton-npcm845-evb.dts | 445 ++++++++++++++++++
1 file changed, 445 insertions(+)
diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
index 2638ee1c3846..46d5bd1c2129 100644
--- a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
+++ b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
@@ -10,6 +10,42 @@ / {
aliases {
serial0 = &serial0;
+ ethernet1 = &gmac1;
+ ethernet2 = &gmac2;
+ ethernet3 = &gmac3;
+ mdio-gpio0 = &mdio0;
+ mdio-gpio1 = &mdio1;
+ fiu0 = &fiu0;
+ fiu1 = &fiu3;
+ fiu2 = &fiux;
+ fiu3 = &fiu1;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
+ i2c9 = &i2c9;
+ i2c10 = &i2c10;
+ i2c11 = &i2c11;
+ i2c12 = &i2c12;
+ i2c13 = &i2c13;
+ i2c14 = &i2c14;
+ i2c15 = &i2c15;
+ i2c16 = &i2c16;
+ i2c17 = &i2c17;
+ i2c18 = &i2c18;
+ i2c19 = &i2c19;
+ i2c20 = &i2c20;
+ i2c21 = &i2c21;
+ i2c22 = &i2c22;
+ i2c23 = &i2c23;
+ i2c24 = &i2c24;
+ i2c25 = &i2c25;
+ i2c26 = &i2c26;
};
chosen {
@@ -25,12 +61,421 @@ refclk: refclk-25mhz {
clock-frequency = <25000000>;
#clock-cells = <0>;
};
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ tip_reserved: tip at 0 {
+ reg = <0x0 0x0 0x0 0x6200000>;
+ };
+ };
+
+ mdio0: mdio at 0 {
+ compatible = "virtual,mdio-gpio";
+ gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>,
+ <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy at 1 {
+ };
+ };
+
+ mdio1: mdio at 1 {
+ compatible = "virtual,mdio-gpio";
+ gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>,
+ <&gpio2 28 GPIO_ACTIVE_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy1: ethernet-phy at 1 {
+ };
+ };
+};
+
+&gmac1 {
+ phy-mode = "rgmii-id";
+ snps,eee-force-disable;
+ status = "okay";
+};
+
+&gmac2 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&r1_pins
+ &r1oen_pins>;
+ phy-handle = <&phy0>;
+ status = "okay";
+};
+
+&gmac3 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&r2_pins
+ &r2oen_pins>;
+ phy-handle = <&phy1>;
+ status = "okay";
};
&serial0 {
status = "okay";
};
+&fiu0 {
+ status = "okay";
+ spi-nor at 0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-rx-bus-width = <1>;
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ partitions at 80000000 {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bbuboot1 at 0 {
+ label = "bb-uboot-1";
+ reg = <0x0000000 0x80000>;
+ read-only;
+ };
+ bbuboot2 at 80000 {
+ label = "bb-uboot-2";
+ reg = <0x0080000 0x80000>;
+ read-only;
+ };
+ envparam at 100000 {
+ label = "env-param";
+ reg = <0x0100000 0x40000>;
+ read-only;
+ };
+ spare at 140000 {
+ label = "spare";
+ reg = <0x0140000 0xC0000>;
+ };
+ kernel at 200000 {
+ label = "kernel";
+ reg = <0x0200000 0x400000>;
+ };
+ rootfs at 600000 {
+ label = "rootfs";
+ reg = <0x0600000 0x700000>;
+ };
+ spare1 at D00000 {
+ label = "spare1";
+ reg = <0x0D00000 0x200000>;
+ };
+ spare2 at F00000 {
+ label = "spare2";
+ reg = <0x0F00000 0x200000>;
+ };
+ spare3 at 1100000 {
+ label = "spare3";
+ reg = <0x1100000 0x200000>;
+ };
+ spare4 at 1300000 {
+ label = "spare4";
+ reg = <0x1300000 0x0>;
+ };
+ };
+ };
+};
+
+&fiu1 {
+ status = "okay";
+ spi-nor at 0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-rx-bus-width = <2>;
+ spi-tx-bus-width = <2>;
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ partitions at A0000000 {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ system1 at 0 {
+ label = "spi1-system1";
+ reg = <0x0 0x0>;
+ };
+ };
+ };
+};
+
+&fiu3 {
+ pinctrl-0 = <&spi3_pins>, <&spi3quad_pins>;
+ status = "okay";
+ spi-nor at 0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-rx-bus-width = <1>;
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ partitions at A0000000 {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ system1 at 0 {
+ label = "spi3-system1";
+ reg = <0x0 0x0>;
+ };
+ };
+ };
+};
+
+&fiux {
+ spix-mode;
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&udc0 {
+ status = "okay";
+};
+
+&udc1 {
+ status = "okay";
+};
+
+&udc2 {
+ status = "okay";
+};
+
+&udc3 {
+ status = "okay";
+};
+
+&udc4 {
+ status = "okay";
+};
+
+&udc5 {
+ status = "okay";
+};
+
+&udc6 {
+ status = "okay";
+};
+
+&udc7 {
+ status = "okay";
+};
+
+&mc {
+ status = "okay";
+};
+
+&peci {
+ status = "okay";
+};
+
+&rng {
+ status = "okay";
+};
+
+&adc {
+ #io-channel-cells = <1>;
+ status = "okay";
+};
+
&watchdog1 {
status = "okay";
};
+
+&pwm_fan {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pins &pwm1_pins
+ &pwm2_pins &pwm3_pins
+ &pwm4_pins &pwm5_pins
+ &pwm6_pins &pwm7_pins
+ &fanin0_pins &fanin1_pins
+ &fanin2_pins &fanin3_pins
+ &fanin4_pins &fanin5_pins
+ &fanin6_pins &fanin7_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fan at 0 {
+ reg = <0x00>;
+ fan-tach-ch = /bits/ 8 <0x00 0x01>;
+ cooling-levels = <127 255>;
+ };
+ fan at 1 {
+ reg = <0x01>;
+ fan-tach-ch = /bits/ 8 <0x02 0x03>;
+ cooling-levels = /bits/ 8 <127 255>;
+ };
+ fan at 2 {
+ reg = <0x02>;
+ fan-tach-ch = /bits/ 8 <0x04 0x05>;
+ cooling-levels = /bits/ 8 <127 255>;
+ };
+ fan at 3 {
+ reg = <0x03>;
+ fan-tach-ch = /bits/ 8 <0x06 0x07>;
+ cooling-levels = /bits/ 8 <127 255>;
+ };
+ fan at 4 {
+ reg = <0x04>;
+ fan-tach-ch = /bits/ 8 <0x08 0x09>;
+ cooling-levels = /bits/ 8 <127 255>;
+ };
+ fan at 5 {
+ reg = <0x05>;
+ fan-tach-ch = /bits/ 8 <0x0A 0x0B>;
+ cooling-levels = /bits/ 8 <127 255>;
+ };
+ fan at 6 {
+ reg = <0x06>;
+ fan-tach-ch = /bits/ 8 <0x0C 0x0D>;
+ cooling-levels = /bits/ 8 <127 255>;
+ };
+ fan at 7 {
+ reg = <0x07>;
+ fan-tach-ch = /bits/ 8 <0x0E 0x0F>;
+ cooling-levels = /bits/ 8 <127 255>;
+ };
+};
+
+&pspi {
+ cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+ status = "okay";
+ Flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <1000000>;
+ partition at 0 {
+ label = "spi1_spare0";
+ reg = <0x0 0x0>;
+ };
+ };
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ eeprom at 50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ tmp100 at 48 {
+ compatible = "tmp100";
+ reg = <0x48>;
+ status = "okay";
+ };
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&i2c14 {
+ status = "okay";
+};
+
+&i2c15 {
+ status = "okay";
+};
+
+&i2c16 {
+ status = "okay";
+};
+
+&i2c17 {
+ status = "okay";
+};
+
+&i2c18 {
+ status = "okay";
+};
+
+&i2c19 {
+ status = "okay";
+};
+
+&i2c20 {
+ status = "okay";
+};
+
+&i2c21 {
+ status = "okay";
+};
+
+&i2c22 {
+ status = "okay";
+};
+
+&i2c23 {
+ status = "okay";
+};
+
+&i2c24 {
+ status = "okay";
+};
+
+&i2c25 {
+ status = "okay";
+};
+
+&i2c26 {
+ status = "okay";
+};
--
2.34.1
More information about the openbmc
mailing list