[PATCH v7 3/4] i2c: npcm: use i2c frequency table

[Tyrone Ting]

Hi Andi:

Thank you for your comments.

Andi Shyti <andi.shyti at kernel.org> 於 2024年10月24日 週四 下午6:20寫道：
>
> Hi Tyrone,
>
> ...
>
> > -     /* 100KHz and below: */
> > -     if (bus_freq_hz <= I2C_MAX_STANDARD_MODE_FREQ) {
> > -             sclfrq = src_clk_khz / (bus_freq_khz * 4);
> > -
> > -             if (sclfrq < SCLFRQ_MIN || sclfrq > SCLFRQ_MAX)
> > -                     return -EDOM;
> > -
> > -             if (src_clk_khz >= 40000)
> > -                     hldt = 17;
> > -             else if (src_clk_khz >= 12500)
> > -                     hldt = 15;
> > -             else
> > -                     hldt = 7;
> > -     }
> > -
> > -     /* 400KHz: */
> > -     else if (bus_freq_hz <= I2C_MAX_FAST_MODE_FREQ) {
> > -             sclfrq = 0;
> > +     switch (bus_freq_hz) {
> > +     case I2C_MAX_STANDARD_MODE_FREQ:
> > +             smb_timing = smb_timing_100khz;
> > +             table_size = ARRAY_SIZE(smb_timing_100khz);
> > +             break;
> > +     case I2C_MAX_FAST_MODE_FREQ:
> > +             smb_timing = smb_timing_400khz;
> > +             table_size = ARRAY_SIZE(smb_timing_400khz);
> >               fast_mode = I2CCTL3_400K_MODE;
> > -
> > -             if (src_clk_khz < 7500)
> > -                     /* 400KHZ cannot be supported for core clock < 7.5MHz */
> > -                     return -EDOM;
> > -
> > -             else if (src_clk_khz >= 50000) {
> > -                     k1 = 80;
> > -                     k2 = 48;
> > -                     hldt = 12;
> > -                     dbnct = 7;
> > -             }
> > -
> > -             /* Master or Slave with frequency > 25MHz */
> > -             else if (src_clk_khz > 25000) {
> > -                     hldt = clk_coef(src_clk_khz, 300) + 7;
> > -                     k1 = clk_coef(src_clk_khz, 1600);
> > -                     k2 = clk_coef(src_clk_khz, 900);
> > -             }
> > -     }
> > -
> > -     /* 1MHz: */
> > -     else if (bus_freq_hz <= I2C_MAX_FAST_MODE_PLUS_FREQ) {
> > -             sclfrq = 0;
> > +             break;
> > +     case I2C_MAX_FAST_MODE_PLUS_FREQ:
> > +             smb_timing = smb_timing_1000khz;
> > +             table_size = ARRAY_SIZE(smb_timing_1000khz);
> >               fast_mode = I2CCTL3_400K_MODE;
> > -
> > -             /* 1MHZ cannot be supported for core clock < 24 MHz */
> > -             if (src_clk_khz < 24000)
> > -                     return -EDOM;
> > -
> > -             k1 = clk_coef(src_clk_khz, 620);
> > -             k2 = clk_coef(src_clk_khz, 380);
> > -
> > -             /* Core clk > 40 MHz */
> > -             if (src_clk_khz > 40000) {
> > -                     /*
> > -                      * Set HLDT:
> > -                      * SDA hold time:  (HLDT-7) * T(CLK) >= 120
> > -                      * HLDT = 120/T(CLK) + 7 = 120 * FREQ(CLK) + 7
> > -                      */
> > -                     hldt = clk_coef(src_clk_khz, 120) + 7;
> > -             } else {
> > -                     hldt = 7;
> > -                     dbnct = 2;
> > -             }
> > +             break;
> > +     default:
> > +             return -EINVAL;
>
> There is here a slight change of behaiour which is not mentioned
> in the commit log. Before the user could set a bus_freq_hz which
> had to be <= I2C_MAX_..._MODE_FREQ, while now it has to be
> precisely that.
>
> Do we want to check what the user has set in the DTS?

The driver checks the bus frequency the user sets in the DTS.

Please refer to the links:
1. https://github.com/torvalds/linux/blob/master/drivers/i2c/busses/i2c-npcm7xx.c#L1995
2. https://github.com/torvalds/linux/blob/master/drivers/i2c/busses/i2c-npcm7xx.c#L2002

>
> (Or am I missing something?)
>
> Thanks,
> Andi

Thank you.

Regards,
Tyrone