[PATCH] i2c: aspeed: Consider i2c reset for muti-master case

[Andi Shyti]

Hi Tommy,

On Tue, Oct 22, 2024 at 02:42:08AM +0000, Tommy Huang wrote:
> Hi Andrew,
> 
> 	Thanks for your comments.
> 	I want to fix the situation when our controller is set as target mode and reading / writing by other i2c host.
> 	However, this host is stopped by any other reason (DC on/off..etc).
> 	It will cause the controller is stuck in this situation.
> 	But I find it might not have clear hints to identify this situation is normal or abnormal.
> 	So, this patch should not be applied into mainstream.

Please, avoid top posting, I don't understand which part of the
original message you are trying to comment on.

Second thing, please, before sending a patch, always always
always make sure that checkpatch.pl reports '0' errors and '0'
warnings, except for few sporadic cases.

Andi