[PATCH v15 2/3] i2c: aspeed: support AST2600 i2c new register mode driver

[Philipp Zabel]

On Mo, 2024-10-07 at 11:52 +0800, Ryan Chen wrote:
> Add i2c new register mode driver to support AST2600 i2c
> new register mode. AST2600 i2c controller have legacy and
> new register mode. The new register mode have global register
> support 4 base clock for scl clock selection, and new clock
> divider mode. The new register mode have separate register
> set to control i2c controller and target. This patch is for i2c
> controller mode driver.
> 
> Signed-off-by: Ryan Chen <ryan_chen at aspeedtech.com>
> ---
>  drivers/i2c/busses/Kconfig       |   11 +
>  drivers/i2c/busses/Makefile      |    1 +
>  drivers/i2c/busses/i2c-ast2600.c | 1032 ++++++++++++++++++++++++++++++
>  3 files changed, 1044 insertions(+)
>  create mode 100644 drivers/i2c/busses/i2c-ast2600.c
> 
[...]
> diff --git a/drivers/i2c/busses/i2c-ast2600.c b/drivers/i2c/busses/i2c-ast2600.c
> new file mode 100644
> index 000000000000..17ba0ee77c27
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-ast2600.c
> @@ -0,0 +1,1032 @@
[...]
> +static int ast2600_i2c_probe(struct platform_device *pdev)
> +{
[...]
> +	i2c_bus->rst = devm_reset_control_get_shared(dev, NULL);
> +	if (IS_ERR(i2c_bus->rst))
> +		return dev_err_probe(dev, PTR_ERR(i2c_bus->rst), "Missing reset ctrl\n");
> +
> +	reset_control_deassert(i2c_bus->rst);

The shared reset should be asserted again in ast2600_i2c_remove().

regards
Philipp