[PATCH] i2c: aspeed: Update the stop sw state when the bus recovry occurs

Tommy Huang tommy_huang at aspeedtech.com
Thu May 30 17:06:56 AEST 2024


When the i2c bus recovey occurs, driver will send i2c stop command
in the scl low condition. In this case the sw state will still keep
original situation. Under multi-master usage, i2c bus recovery will
be called when i2c transfer timeout occurs. Update the stop command
calling with aspeed_i2c_do_stop function to update master_state.

Fixes: f327c686d3ba ("i2c: aspeed: added driver for Aspeed I2C")

Signed-off-by: Tommy Huang <tommy_huang at aspeedtech.com>
---
 drivers/i2c/busses/i2c-aspeed.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index ce8c4846b7fa..32f8b0c1c174 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -169,6 +169,7 @@ struct aspeed_i2c_bus {
 };
 
 static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus);
+static void aspeed_i2c_do_stop(struct aspeed_i2c_bus *bus);
 
 static int aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus)
 {
@@ -187,7 +188,7 @@ static int aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus)
 			command);
 
 		reinit_completion(&bus->cmd_complete);
-		writel(ASPEED_I2CD_M_STOP_CMD, bus->base + ASPEED_I2C_CMD_REG);
+		aspeed_i2c_do_stop(bus);
 		spin_unlock_irqrestore(&bus->lock, flags);
 
 		time_left = wait_for_completion_timeout(
-- 
2.25.1



More information about the openbmc mailing list