[PATCH v1] pinctrl: pinctrl-aspeed-g6: correct the offset of SCU630

[Delphine_CC_Chiu/WYHQ/Wiwynn]

> -----Original Message-----
> From: Delphine CC Chiu <Delphine_CC_Chiu at wiwynn.com>
> Sent: Wednesday, March 13, 2024 10:42 AM
> To: patrick at stwcx.xyz; Andrew Jeffery <andrew at codeconstruct.com.au>; Linus
> Walleij <linus.walleij at linaro.org>; Joel Stanley <joel at jms.id.au>
> Cc: Delphine_CC_Chiu/WYHQ/Wiwynn <Delphine_CC_Chiu at wiwynn.com>;
> linux-aspeed at lists.ozlabs.org; openbmc at lists.ozlabs.org;
> linux-gpio at vger.kernel.org; linux-arm-kernel at lists.infradead.org;
> linux-kernel at vger.kernel.org
> Subject: [PATCH v1] pinctrl: pinctrl-aspeed-g6: correct the offset of SCU630
> 
> Description:
> Correct the offset of "Disable GPIO Internal Pull-Down #4" register that should
> be 630h according to the AST2620 datasheet.
> 
> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu at wiwynn.com>
> ---

Hi,
Please don't review this patch since ASPEED also provided the patch to
fix this issue.
Thanks!