[PATCH linux dev-6.6 07/17] ARM: dts: aspeed: minerva: Define the LEDs node name

[Yang Chen]

From: Yang Chen <yang.chen at quantatw.com>

Define the LEDs node name.

Signed-off-by: Yang Chen <yang.chen at quantatw.com>
---
 .../aspeed/aspeed-bmc-facebook-minerva.dts    | 28 +++++++++++++++++--
 1 file changed, 26 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
index bc323bfbe514..dfea0025e6ce 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
@@ -44,11 +44,35 @@ iio-hwmon {
 	leds {
 		compatible = "gpio-leds";
 
-		led-fan-fault {
-			label = "led-fan-fault";
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "power_blue";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			label = "fan_status_led";
 			gpios = <&leds_gpio 9 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
+
+		led-4 {
+			label = "fan_fault_led_n";
+			gpios = <&leds_gpio 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
 	};
 };
 
-- 
2.34.1