[PATCH v2 1/2] pinctrl: aspeed-g6: Add NCSI pin group config

Paul Menzel pmenzel at molgen.mpg.de
Thu Jun 20 16:08:23 AEST 2024


Dear Potin,


Thank you for your patch.

Am 20.06.24 um 03:25 schrieb Potin Lai:
> In the NCSI pin table, the reference clock output pin (RMIIXRCLKO) is not
> needed on the management controller side.

Please add a reference to the source for this statement.

> To optimize pin usage, add new NCSI pin groupis that excludes RMIIXRCLKO,

groupis? Do you mean group?

> reducing the number of required pins.
> 
> Signed-off-by: Potin Lai <potin.lai.pt at gmail.com>
> ---
>   drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 10 ++++++++--
>   1 file changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
> index 7938741136a2c..31e4e0b342a00 100644
> --- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
> +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
> @@ -249,7 +249,9 @@ PIN_DECL_2(E26, GPIOD3, RGMII3RXD3, RMII3RXER);
>   
>   FUNC_GROUP_DECL(RGMII3, H24, J22, H22, H23, G22, F22, G23, G24, F23, F26, F25,
>   		E26);
> -FUNC_GROUP_DECL(RMII3, H24, J22, H22, H23, G23, F23, F26, F25, E26);
> +GROUP_DECL(RMII3, H24, J22, H22, H23, G23, F23, F26, F25, E26);
> +GROUP_DECL(NCSI3, J22, H22, H23, G23, F23, F26, F25, E26);
> +FUNC_DECL_2(RMII3, RMII3, NCSI3);
>   
>   #define F24 28
>   SIG_EXPR_LIST_DECL_SESG(F24, NCTS3, NCTS3, SIG_DESC_SET(SCU410, 28));
> @@ -355,7 +357,9 @@ FUNC_GROUP_DECL(NRTS4, B24);
>   
>   FUNC_GROUP_DECL(RGMII4, F24, E23, E24, E25, D26, D24, C25, C26, C24, B26, B25,
>   		B24);
> -FUNC_GROUP_DECL(RMII4, F24, E23, E24, E25, C25, C24, B26, B25, B24);
> +GROUP_DECL(RMII4, F24, E23, E24, E25, C25, C24, B26, B25, B24);
> +GROUP_DECL(NCSI4, E23, E24, E25, C25, C24, B26, B25, B24);
> +FUNC_DECL_2(RMII4, RMII4, NCSI4);
>   
>   #define D22 40
>   SIG_EXPR_LIST_DECL_SESG(D22, SD1CLK, SD1, SIG_DESC_SET(SCU414, 8));
> @@ -1976,6 +1980,8 @@ static const struct aspeed_pin_group aspeed_g6_groups[] = {
>   	ASPEED_PINCTRL_GROUP(MDIO2),
>   	ASPEED_PINCTRL_GROUP(MDIO3),
>   	ASPEED_PINCTRL_GROUP(MDIO4),
> +	ASPEED_PINCTRL_GROUP(NCSI3),
> +	ASPEED_PINCTRL_GROUP(NCSI4),
>   	ASPEED_PINCTRL_GROUP(NCTS1),
>   	ASPEED_PINCTRL_GROUP(NCTS2),
>   	ASPEED_PINCTRL_GROUP(NCTS3),


Kind regards,

Paul


More information about the openbmc mailing list