[PATCH linux dev-6.6 5/5] pinctrl: aspeed-g6: Add NCSI pin group config
Potin Lai
potin.lai.pt at gmail.com
Thu Jul 25 03:21:29 AEST 2024
Based on the NCSI pin table (Table 181) in NCSI spec[1], the reference
clock output pin (RMIIXRCLKO) is not needed on the management controller
side.
To optimize pin usage, add new NCSI pin group that excludes RMIIXRCLKO,
reducing the number of required pins.
LINK: [1] https://www.dmtf.org/sites/default/files/standards/documents/DSP0222_1.2.0a.pdf
Reviewed-by: Andrew Jeffery <andrew at codeconstruct.com.au>
Signed-off-by: Potin Lai <potin.lai.pt at gmail.com>
---
drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
index 7938741136a2c..31e4e0b342a00 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
@@ -249,7 +249,9 @@ PIN_DECL_2(E26, GPIOD3, RGMII3RXD3, RMII3RXER);
FUNC_GROUP_DECL(RGMII3, H24, J22, H22, H23, G22, F22, G23, G24, F23, F26, F25,
E26);
-FUNC_GROUP_DECL(RMII3, H24, J22, H22, H23, G23, F23, F26, F25, E26);
+GROUP_DECL(RMII3, H24, J22, H22, H23, G23, F23, F26, F25, E26);
+GROUP_DECL(NCSI3, J22, H22, H23, G23, F23, F26, F25, E26);
+FUNC_DECL_2(RMII3, RMII3, NCSI3);
#define F24 28
SIG_EXPR_LIST_DECL_SESG(F24, NCTS3, NCTS3, SIG_DESC_SET(SCU410, 28));
@@ -355,7 +357,9 @@ FUNC_GROUP_DECL(NRTS4, B24);
FUNC_GROUP_DECL(RGMII4, F24, E23, E24, E25, D26, D24, C25, C26, C24, B26, B25,
B24);
-FUNC_GROUP_DECL(RMII4, F24, E23, E24, E25, C25, C24, B26, B25, B24);
+GROUP_DECL(RMII4, F24, E23, E24, E25, C25, C24, B26, B25, B24);
+GROUP_DECL(NCSI4, E23, E24, E25, C25, C24, B26, B25, B24);
+FUNC_DECL_2(RMII4, RMII4, NCSI4);
#define D22 40
SIG_EXPR_LIST_DECL_SESG(D22, SD1CLK, SD1, SIG_DESC_SET(SCU414, 8));
@@ -1976,6 +1980,8 @@ static const struct aspeed_pin_group aspeed_g6_groups[] = {
ASPEED_PINCTRL_GROUP(MDIO2),
ASPEED_PINCTRL_GROUP(MDIO3),
ASPEED_PINCTRL_GROUP(MDIO4),
+ ASPEED_PINCTRL_GROUP(NCSI3),
+ ASPEED_PINCTRL_GROUP(NCSI4),
ASPEED_PINCTRL_GROUP(NCTS1),
ASPEED_PINCTRL_GROUP(NCTS2),
ASPEED_PINCTRL_GROUP(NCTS3),
--
2.31.1
More information about the openbmc
mailing list