[PATCH 1/1] ARM:dts:aspeed: Initial device tree for AMD Onyx Platform

[Andrew Jeffery]

On Tue, 2024-01-09 at 21:35 -0600, Supreeth Venkatesh wrote:
> This patch adds initial device tree and makefile updates for
> AMD Onyx platform.
> 
> AMD Onyx platform is an AMD customer reference board with an Aspeed
> ast2600 BMC manufactured by AMD.
> It describes I2c devices, Fans, Kcs devices, Uarts, Mac, LEDs, etc.
> present on AMD Onyx platform.
> 
> Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh at amd.com>
> ---
>  arch/arm/boot/dts/aspeed/Makefile             |  1 +
>  .../boot/dts/aspeed/aspeed-bmc-amd-onyx.dts   | 98 +++++++++++++++++++
>  2 files changed, 99 insertions(+)
>  create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-amd-onyx.dts
> 
> diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
> index fb9cc95f1b60..2b27d377aae2 100644
> --- a/arch/arm/boot/dts/aspeed/Makefile
> +++ b/arch/arm/boot/dts/aspeed/Makefile
> @@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
>  	aspeed-ast2600-evb.dtb \
>  	aspeed-bmc-amd-daytonax.dtb \
>  	aspeed-bmc-amd-ethanolx.dtb \
> +	aspeed-bmc-amd-onyx.dtb \
>  	aspeed-bmc-ampere-mtjade.dtb \
>  	aspeed-bmc-ampere-mtmitchell.dtb \
>  	aspeed-bmc-arm-stardragon4800-rep2.dtb \
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-onyx.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-onyx.dts
> new file mode 100644
> index 000000000000..a7056cd29553
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-onyx.dts
> @@ -0,0 +1,98 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +// Copyright (c) 2021 - 2024 AMD Inc.
> +// Author: Supreeth Venkatesh <supreeth.venkatesh at amd.com>
> +
> +/dts-v1/;
> +
> +#include "aspeed-g6.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +
> +/ {
> +       model = "AMD Onyx BMC";
> +       compatible = "amd,onyx-bmc", "aspeed,ast2600";
> +
> +       aliases {
> +               serial0 = &uart1;
> +               serial4 = &uart5;
> +      };
> +
> +       chosen {
> +               stdout-path = &uart5;
> +               bootargs = "console=ttyS4,115200 earlyprintk vmalloc=512MB";

Why `vmalloc=512MB`? Can you add a comment explaining the need for
that?

That said, setting bootargs in the devicetree is generally discouraged.

> +       };
> +
> +       memory at 80000000 {
> +               device_type = "memory";
> +               reg = <0x80000000 0x80000000>;
> +       };
> +
> +};
> +
> +&mdio0 {
> +       status = "okay";
> +
> +       ethphy0: ethernet-phy at 0 {
> +               compatible = "ethernet-phy-ieee802.3-c22";
> +               reg = <0>;
> +       };
> +};
> +
> +&mac3 {
> +       status = "okay";
> +       phy-mode = "rgmii";
> +       phy-handle = <&ethphy0>;
> +
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_rgmii4_default>;
> +};
> +
> +
> +
> +&fmc {
> +       status = "okay";
> +       flash at 0 {
> +               compatible = "jedec,spi-nor";
> +               status = "okay";
> +               #include "openbmc-flash-layout-128.dtsi"
> +       };
> +};
> +
> +//Host Console
> +&uart1 {
> +       status = "okay";
> +};

How are you managing the host console? Enabling UART1 for that on the
BMC piques my interest :)

Apologies for the delay in reviewing.

Andrew