[PATCH 0/6] Update the device tree for Ampere's BMC platform

[Rob Herring (Arm)]

On Thu, 01 Aug 2024 09:12:10 +0000, Chanh Nguyen wrote:
> Updates the device tree to support some features on Ampere's
> Mt.Mitchell BMC and Ampere's Mt.Jade BMC.
> 
> Chanh Nguyen (6):
>   ARM: dts: aspeed: mtjade, mtmitchell: Add OCP temperature sensors
>   ARM: dts: aspeed: mtmitchell: Add I2C temperature sensor alias ports
>   ARM: dts: aspeed: mtmitchell: Add I2C Riser card alias ports
>   ARM: dts: aspeed: mtmitchell: Enable i2c10 and i2c15
>   ARM: dts: aspeed: mtmitchell: Add LEDs
>   ARM: dts: aspeed: mtmitchell: Add I2C FAN controllers
> 
>  .../dts/aspeed/aspeed-bmc-ampere-mtjade.dts   |  16 ++
>  .../aspeed/aspeed-bmc-ampere-mtmitchell.dts   | 152 ++++++++++++++++++
>  2 files changed, 168 insertions(+)
> 
> --
> 2.43.0
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y aspeed/aspeed-bmc-ampere-mtjade.dtb aspeed/aspeed-bmc-ampere-mtmitchell.dtb' for 20240801091217.1408809-1-chanh at os.amperecomputing.com:

arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dtb: /ahb/apb/bus at 1e78a000/i2c at 480/fan-controller0 at 20: failed to match any schema with compatible: ['maxim,max31790']
arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dtb: /ahb/apb/bus at 1e78a000/i2c at 480/fan-controller1 at 2f: failed to match any schema with compatible: ['maxim,max31790']