[PATCH v11 4/4] ARM: dts: wpcm450: Switch clocks to clock controller
Jonathan Neuschäfer
j.neuschaefer at gmx.net
Tue Apr 2 01:06:33 AEDT 2024
This change is incompatible with older kernels because it requires the
clock controller driver, but I think that's acceptable because WPCM450
support is generally still in an early phase.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer at gmx.net>
---
It's probably best to delay merging of this patch until after the driver
is merged; I'm including it here for review, and in case someone wants
to set up a shared branch between the clock and devicetree parts.
v11:
- no changes
v10:
- Reintroducing this patch as part of the clock/reset controller series
---
arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi | 22 ++++++++++------------
1 file changed, 10 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
index 9dfdd8f67319d3..7e3ea8b31151b3 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
@@ -2,6 +2,7 @@
// Copyright 2021 Jonathan Neuschäfer
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/nuvoton,wpcm450-clk.h>
/ {
compatible = "nuvoton,wpcm450";
@@ -30,13 +31,6 @@ cpu at 0 {
};
};
- clk24m: clock-24mhz {
- /* 24 MHz dummy clock */
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- #clock-cells = <0>;
- };
-
refclk: clock-48mhz {
/* 48 MHz reference oscillator */
compatible = "fixed-clock";
@@ -70,7 +64,7 @@ serial0: serial at b8000000 {
reg = <0xb8000000 0x20>;
reg-shift = <2>;
interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk24m>;
+ clocks = <&clk WPCM450_CLK_UART0>;
pinctrl-names = "default";
pinctrl-0 = <&bsp_pins>;
status = "disabled";
@@ -81,7 +75,7 @@ serial1: serial at b8000100 {
reg = <0xb8000100 0x20>;
reg-shift = <2>;
interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk24m>;
+ clocks = <&clk WPCM450_CLK_UART1>;
status = "disabled";
};
@@ -89,14 +83,18 @@ timer0: timer at b8001000 {
compatible = "nuvoton,wpcm450-timer";
interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb8001000 0x1c>;
- clocks = <&clk24m>;
+ clocks = <&clk WPCM450_CLK_TIMER0>,
+ <&clk WPCM450_CLK_TIMER1>,
+ <&clk WPCM450_CLK_TIMER2>,
+ <&clk WPCM450_CLK_TIMER3>,
+ <&clk WPCM450_CLK_TIMER4>;
};
watchdog0: watchdog at b800101c {
compatible = "nuvoton,wpcm450-wdt";
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb800101c 0x4>;
- clocks = <&clk24m>;
+ clocks = <&clk WPCM450_CLK_WDT>;
};
aic: interrupt-controller at b8002000 {
@@ -480,7 +478,7 @@ fiu: spi-controller at c8000000 {
#size-cells = <0>;
reg = <0xc8000000 0x1000>, <0xc0000000 0x4000000>;
reg-names = "control", "memory";
- clocks = <&clk 0>;
+ clocks = <&clk WPCM450_CLK_FIU>;
nuvoton,shm = <&shm>;
status = "disabled";
};
--
2.43.0
More information about the openbmc
mailing list