[PATCH linux dev-6.1 v3 0/1] Add i2c-mux and eeprom devices for Meta Yosemite 4

Delphine CC Chiu Delphine_CC_Chiu at wiwynn.com
Fri Sep 22 15:44:34 AEST 2023


Changelog:
 v3 - Enable adc 15, tpm, wdt2
    - Change spi-tx/rx-bus-width to duo mode
    - Add device mp5023, pmbus for Flex power module
    - Change ina230 to ina233, pca9846 to pca9546
    - Set adc128d818 and max31790 config
    - Add jtag1 and gpio0 config
    - Separate binding dosument to corresponding driver patches
 v2 - Add devicetree config for ina233 and max31790
    - Add binding documents for ina233 and max31790
 v1 - Add gpio and eeprom devices
	  - Add spi-gpio config for tpmdev
	  - Remove temperature-sensor 11-004a and 11-004b
	  - Change power-sensor ina230 to ina233
	  - Revise adc128d818 config for adc mode
	  - Add vendor prefix for max31790 and remove redundant config

Delphine CC Chiu (1):
  ARM: dts: aspeed: yosemite4: Add i2c-mux/eeprom devices

 .../dts/aspeed-bmc-facebook-yosemite4.dts     | 895 ++++++++++++++++--
 1 file changed, 842 insertions(+), 53 deletions(-)

-- 
2.25.1



More information about the openbmc mailing list