[PATCH linux dev-6.5 2/4] ARM: dts: aspeed: Everest: Add fan controller properties

[Eddie James]

Add the necessary Max chip specific fan properties.

Signed-off-by: Eddie James <eajames at linux.ibm.com>
Signed-off-by: Joel Stanley <joel at jms.id.au>
---
 .../dts/aspeed/aspeed-bmc-ibm-everest.dts     | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
index 1f59ab28d29b..fdb3ccaf0cb5 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
@@ -2042,24 +2042,52 @@ fan at 0 {
 					compatible = "pmbus-fan";
 					reg = <0>;
 					tach-pulses = <2>;
+					maxim,fan-rotor-input = "tach";
+					maxim,fan-pwm-freq = <25000>;
+					maxim,fan-dual-tach;
+					maxim,fan-no-watchdog;
+					maxim,fan-no-fault-ramp;
+					maxim,fan-ramp = <2>;
+					maxim,fan-fault-pin-mon;
 				};
 
 				fan at 1 {
 					compatible = "pmbus-fan";
 					reg = <1>;
 					tach-pulses = <2>;
+					maxim,fan-rotor-input = "tach";
+					maxim,fan-pwm-freq = <25000>;
+					maxim,fan-dual-tach;
+					maxim,fan-no-watchdog;
+					maxim,fan-no-fault-ramp;
+					maxim,fan-ramp = <2>;
+					maxim,fan-fault-pin-mon;
 				};
 
 				fan at 2 {
 					compatible = "pmbus-fan";
 					reg = <2>;
 					tach-pulses = <2>;
+					maxim,fan-rotor-input = "tach";
+					maxim,fan-pwm-freq = <25000>;
+					maxim,fan-dual-tach;
+					maxim,fan-no-watchdog;
+					maxim,fan-no-fault-ramp;
+					maxim,fan-ramp = <2>;
+					maxim,fan-fault-pin-mon;
 				};
 
 				fan at 3 {
 					compatible = "pmbus-fan";
 					reg = <3>;
 					tach-pulses = <2>;
+					maxim,fan-rotor-input = "tach";
+					maxim,fan-pwm-freq = <25000>;
+					maxim,fan-dual-tach;
+					maxim,fan-no-watchdog;
+					maxim,fan-no-fault-ramp;
+					maxim,fan-ramp = <2>;
+					maxim,fan-fault-pin-mon;
 				};
 			};
 
-- 
2.39.3