[PATCH v1 2/2] net: stmmac: Add NPCM support

[Russell King (Oracle)]

On Tue, Nov 21, 2023 at 05:17:33PM +0200, Tomer Maimon wrote:
> Add Nuvoton NPCM BMC SoCs support to STMMAC dwmac driver.
> 
> And modify MAINTAINERS to add a new F: entry for this driver.
> 
> Signed-off-by: Tomer Maimon <tmaimon77 at gmail.com>

A few comments on this...

> +#define IND_AC_BA_REG		0x1FE
> +#define SR_MII_CTRL		0x3E0000
> +
> +#define PCS_SR_MII_CTRL_REG	0x0
> +#define PCS_SPEED_SELECT6	BIT(6)
> +#define PCS_AN_ENABLE		BIT(12)
> +#define PCS_SPEED_SELECT13	BIT(13)
> +#define PCS_RST			BIT(15)

include/uapi/linux/mii.h:

#define BMCR_SPEED1000          0x0040  /* MSB of Speed (1000)         */
#define BMCR_ANENABLE           0x1000  /* Enable auto negotiation     */
#define BMCR_SPEED100           0x2000  /* Select 100Mbps              */
#define BMCR_RESET              0x8000  /* Reset to default state      */

Look familiar? Maybe use the standard definitions for a standardised
register?

> +void npcm_dwmac_pcs_init(struct npcm_dwmac *dwmac, struct device *dev,
> +			 struct plat_stmmacenet_data *plat_dat)
> +{
> +	u16 val;
> +
> +	iowrite16((u16)(SR_MII_CTRL >> 9), dwmac->reg + IND_AC_BA_REG);
> +	val = ioread16(dwmac->reg + PCS_SR_MII_CTRL_REG);
> +	val |= PCS_RST;
> +	iowrite16(val, dwmac->reg + PCS_SR_MII_CTRL_REG);
> +
> +	while (val & PCS_RST)
> +		val = ioread16(dwmac->reg + PCS_SR_MII_CTRL_REG);

What if the PCS never clears its reset bit? Maybe use
read_poll_timeout() ?

> +
> +	val &= ~(PCS_AN_ENABLE);
> +	iowrite16(val, dwmac->reg + PCS_SR_MII_CTRL_REG);
> +}

Also, maybe it's time to require new stmmac platform support to start
making use of the phylink PCS support rather than continuing to code its
own?

I notice, however, that you always disable inband signalling - please
explain why. Also, what protocol does the PCS use when communicating
with the PHY?

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!