[External] Running evb-ast2600 image using qemu

Ranbir Singh saini.ranbirs at outlook.com
Tue Mar 14 17:04:18 AEDT 2023


Jian - Using the same command as you mentioned, and after machine has booted and logged in

[cid:9662b8d5-ea0e-4c1a-b14d-bc83fb268f1f]

[cid:fc73dbaa-9da2-45fc-8269-fd80b071ae36]
Also, noted that CurrentBMCState continue to come as NotReady even after 5 min of bootup completed. Is this normal ?

Best Regards,
Ranbir Singh

________________________________
From: Zhang Jian <zhangjian.3032 at bytedance.com>
Sent: 14 March 2023 11:05
To: Ranbir Singh <saini.ranbirs at outlook.com>
Cc: David Bashaw <theactualdbashaw at gmail.com>; openbmc at lists.ozlabs.org <openbmc at lists.ozlabs.org>
Subject: Re: [External] Running evb-ast2600 image using qemu

On Tue, Mar 14, 2023 at 1:28 PM Ranbir Singh <saini.ranbirs at outlook.com> wrote:
>
> Is there anyway to login using the Web UI also when running image on qemu ?
of cause, the command line forwarded the port localhost 1443 to bmc
443, you just need access https://127.0.0.1:1443 in your browser
> ________________________________
> From: openbmc <openbmc-bounces+saini.ranbirs=outlook.com at lists.ozlabs.org> on behalf of Jian Zhang <zhangjian.3032 at bytedance.com>
> Sent: 14 March 2023 09:02
> To: David Bashaw <theactualdbashaw at gmail.com>
> Cc: openbmc at lists.ozlabs.org <openbmc at lists.ozlabs.org>
> Subject: Re: [External] Running evb-ast2600 image using qemu
>
> The command that I used.
> ```
> qemu-system-arm -M ast2600-evb  -nographic -drive file=image-bmc,format=raw,if=mtd -net nic,model=ftgmac100,netdev=netdev1 -netdev user,id=netdev1,hostfwd=:127.0.0.1:3222-:22,hostfwd=:127.0.0.1:1443-:443,hostfwd=udp::1623-:623
> ```
> For your reference.
>
> Jian
> From: "David Bashaw"<theactualdbashaw at gmail.com>
> Date: Tue, Mar 14, 2023, 07:52
> Subject: [External] Running evb-ast2600 image using qemu
> To: <openbmc at lists.ozlabs.org>
> I'm new to openbmc but have read lots fo docs.
> I want to try running an evb-ast2600 image using qemu.
> I ran the following steps:
> .setup evb-ast2600
> bitbake obmc-phosphor-image
>
> The build completes fine.
> I installed qemu-system-arm also.
>
> What command line should I use to invoke qemu?
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20230314/f31c1201/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 39419 bytes
Desc: image.png
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20230314/f31c1201/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 98636 bytes
Desc: image.png
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20230314/f31c1201/attachment-0003.png>


More information about the openbmc mailing list