[PATCH v5 1/3] gpio: nuvoton: Add Nuvoton NPCM sgpio driver

[Paul Menzel]

Dear Jim,


Am 24.07.23 um 05:04 schrieb Jim Liu:

> sorry for reply late.

No problem. Thank you for your reply. Some minor comments below.

> First, thanks for your review.
> 
> the description is as below:
> 
> The SGPIO module can be programmed to support from zero (none) to
> eight external output ports ,

No space before the comma.

> each with eight output pins (for a total of 64 output pins). The
> output ports must be serial-to-parallel devices (such as the HC595 or
> a faster equivalent).
> 
> The SGPIO can be programmed to accept from zero to eight external
> input ports (IXPp), each with eight input pins, supporting a total of
> 64 input pins. The input ports must be parallel-to-serial devices
> (such as the HC165 or a faster equivalent).
> 
> you can add hc595 and hc165 ic to get the serial data from BMC and
> send serial data to BMC.
> This driver can expand  extra gpio pins up to 64 input and 64 output.

One space before “extra”. Maybe:

hc595 and c165 ic allow to transmit serial data from and to the BMC. 
This driver can expand extra GPIO pins up to 64 inputs and 64 outputs.

> i will use jim.t90615 at gmail.com this mail to upstream this driver not
> company mail.

If this is paid work, using your company email address should be 
preferred in my opinion.

> The driver needs to fix the length of the variables, because the reg
> size is one byte.

One byte would also fit into `unsigned int`, wouldn’t it?

> I will follow your suggestion to modify and upstream again. If you
> have any questions please let me know.

If you could use Mozilla Thunderbird to reply easily in interleaved 
style, that would great.

Otherwise, I am looking forward to the next revision.


Kind regards,

Paul