[PATCH v3 3/3] hwmon: Driver for Nuvoton NCT7363Y
baneric926 at gmail.com
baneric926 at gmail.com
Fri Dec 22 12:33:52 AEDT 2023
From: Ban Feng <kcfeng0 at nuvoton.com>
NCT7363Y is an I2C based hardware monitoring chip from Nuvoton.
Signed-off-by: Ban Feng <kcfeng0 at nuvoton.com>
---
Documentation/hwmon/index.rst | 1 +
Documentation/hwmon/nct7363.rst | 33 ++
MAINTAINERS | 2 +
drivers/hwmon/Kconfig | 11 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/nct7363.c | 515 ++++++++++++++++++++++++++++++++
6 files changed, 563 insertions(+)
create mode 100644 Documentation/hwmon/nct7363.rst
create mode 100644 drivers/hwmon/nct7363.c
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 72f4e6065bae..178d3cae95de 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -161,6 +161,7 @@ Hardware Monitoring Kernel Drivers
mp5023
nct6683
nct6775
+ nct7363
nct7802
nct7904
npcm750-pwm-fan
diff --git a/Documentation/hwmon/nct7363.rst b/Documentation/hwmon/nct7363.rst
new file mode 100644
index 000000000000..89699c95aa4b
--- /dev/null
+++ b/Documentation/hwmon/nct7363.rst
@@ -0,0 +1,33 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver nct7363
+=====================
+
+Supported chip:
+
+ * Nuvoton NCT7363Y
+
+ Prefix: nct7363
+
+ Addresses: I2C 0x20, 0x21, 0x22, 0x23
+
+Author: Ban Feng <kcfeng0 at nuvoton.com>
+
+
+Description
+-----------
+
+The NCT7363Y is a Fan controller which provides up to 16 independent
+FAN input monitors, and up to 16 independent PWM output with SMBus interface.
+
+
+Sysfs entries
+-------------
+
+Currently, the driver supports the following features:
+
+======================= =======================================================
+fanX_input provide current fan rotation value in RPM
+
+pwmX get or set PWM fan control value.
+======================= =======================================================
diff --git a/MAINTAINERS b/MAINTAINERS
index 53cfcc629aa1..e39c4fc01a3b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14842,6 +14842,8 @@ M: Ban Feng <kcfeng0 at nuvoton.com>
L: linux-hwmon at vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/hwmon/nuvoton,nct7363.yaml
+F: Documentation/hwmon/nct7363.rst
+F: drivers/hwmon/nct7363.c
NETDEVSIM
M: Jakub Kicinski <kuba at kernel.org>
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index cf27523eed5a..a0229851fc64 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1605,6 +1605,17 @@ config SENSORS_NCT6775_I2C
This driver can also be built as a module. If so, the module
will be called nct6775-i2c.
+config SENSORS_NCT7363
+ tristate "Nuvoton NCT7363Y"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ If you say yes here you get support for the Nuvoton NCT7363Y,
+ hardware monitoring chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called nct7363.
+
config SENSORS_NCT7802
tristate "Nuvoton NCT7802Y"
depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index e84bd9685b5c..dd794aa06209 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -166,6 +166,7 @@ obj-$(CONFIG_SENSORS_NCT6775_CORE) += nct6775-core.o
nct6775-objs := nct6775-platform.o
obj-$(CONFIG_SENSORS_NCT6775) += nct6775.o
obj-$(CONFIG_SENSORS_NCT6775_I2C) += nct6775-i2c.o
+obj-$(CONFIG_SENSORS_NCT7363) += nct7363.o
obj-$(CONFIG_SENSORS_NCT7802) += nct7802.o
obj-$(CONFIG_SENSORS_NCT7904) += nct7904.o
obj-$(CONFIG_SENSORS_NPCM7XX) += npcm750-pwm-fan.o
diff --git a/drivers/hwmon/nct7363.c b/drivers/hwmon/nct7363.c
new file mode 100644
index 000000000000..1bf6e83afd7f
--- /dev/null
+++ b/drivers/hwmon/nct7363.c
@@ -0,0 +1,515 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2023 Nuvoton Technology corporation.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/i2c.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define NCT7363_REG_GPIO_0_3 0x20
+#define NCT7363_REG_GPIO_4_7 0x21
+#define NCT7363_REG_GPIO_10_13 0x22
+#define NCT7363_REG_GPIO_14_17 0x23
+#define NCT7363_REG_PWMEN_0_7 0x38
+#define NCT7363_REG_PWMEN_8_15 0x39
+#define NCT7363_REG_FANINEN_0_7 0x41
+#define NCT7363_REG_FANINEN_8_15 0x42
+#define NCT7363_REG_FANINx_HVAL(x) (0x48 + ((x) * 2))
+#define NCT7363_REG_FANINx_LVAL(x) (0x49 + ((x) * 2))
+#define NCT7363_REG_FSCPxDUTY(x) (0x90 + ((x) * 2))
+#define NCT7363_REG_VENDOR_ID 0xFD
+#define NCT7363_REG_CHIP_ID 0xFE
+#define NCT7363_REG_DEVICE_ID 0xFF
+
+#define NUVOTON_ID 0x49
+#define CHIP_ID 0x19
+#define DEVICE_ID 0x88
+
+#define PWM_SEL(x) (BIT(0) << ((x % 4) * 2))
+#define FANIN_SEL(x) (BIT(1) << ((x % 4) * 2))
+#define BIT_CHECK(x) (BIT(0) << x)
+
+#define NCT7363_FANINx_LVAL_MASK GENMASK(4, 0)
+#define NCT7363_FANIN_MASK GENMASK(12, 0)
+
+#define NCT7363_PWM_COUNT 16
+#define NCT7363_FANIN_COUNT 16
+
+#define REFRESH_INTERVAL (2 * HZ)
+
+static inline unsigned long FAN_FROM_REG(u16 val)
+{
+ if ((val >= NCT7363_FANIN_MASK) || (val == 0))
+ return 0;
+
+ return (1350000UL / val);
+}
+
+static const unsigned short normal_i2c[] = {
+ 0x20, 0x21, 0x22, 0x23, I2C_CLIENT_END
+};
+
+enum chips { nct7363 };
+
+static const struct i2c_device_id nct7363_id[] = {
+ { "nct7363", nct7363 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, nct7363_id);
+
+static const struct of_device_id nct7363_of_match[] = {
+ { .compatible = "nuvoton,nct7363", .data = (void *)nct7363 },
+ { },
+};
+MODULE_DEVICE_TABLE(of, nct7363_of_match);
+
+struct nct7363_data {
+ struct regmap *regmap;
+ struct mutex update_lock;
+ bool valid;
+ unsigned long last_updated; /* In jiffies */
+
+ u16 fanin_mask;
+ u16 fan[NCT7363_FANIN_COUNT];
+ u16 pwm_mask;
+ u8 pwm[NCT7363_PWM_COUNT];
+};
+
+static struct nct7363_data *nct7363_update_device(struct device *dev)
+{
+ struct nct7363_data *data = dev_get_drvdata(dev);
+ unsigned int hi, lo, regval;
+ int i, ret = 0;
+
+ mutex_lock(&data->update_lock);
+
+ if (!(time_after(jiffies, data->last_updated + REFRESH_INTERVAL)
+ || !data->valid))
+ goto no_sensor_update;
+
+ for (i = 0; i < ARRAY_SIZE(data->fan); i++) {
+ if (!(data->fanin_mask & BIT_CHECK(i)))
+ continue;
+
+ /*
+ * High-byte register should be read first to latch
+ * synchronous low-byte value
+ */
+ ret = regmap_read(data->regmap,
+ NCT7363_REG_FANINx_HVAL(i), &hi);
+ if (ret)
+ goto error;
+
+ ret = regmap_read(data->regmap,
+ NCT7363_REG_FANINx_LVAL(i), &lo);
+ if (ret)
+ goto error;
+
+ data->fan[i] = (hi << 5) | (lo & NCT7363_FANINx_LVAL_MASK);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(data->pwm); i++) {
+ if (!(data->pwm_mask & BIT_CHECK(i)))
+ continue;
+
+ ret = regmap_read(data->regmap,
+ NCT7363_REG_FSCPxDUTY(i), ®val);
+ if (ret)
+ goto error;
+
+ data->pwm[i] = regval;
+ }
+
+ data->last_updated = jiffies;
+ data->valid = true;
+
+error:
+ if (ret)
+ data = ERR_PTR(ret);
+
+no_sensor_update:
+ mutex_unlock(&data->update_lock);
+
+ return data;
+}
+
+static int nct7363_read_fan(struct device *dev, u32 attr, int channel,
+ long *val)
+{
+ struct nct7363_data *data = nct7363_update_device(dev);
+ u16 cnt, rpm;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ switch (attr) {
+ case hwmon_fan_input:
+ cnt = data->fan[channel] & NCT7363_FANIN_MASK;
+ rpm = FAN_FROM_REG(cnt);
+ *val = (long)rpm;
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static umode_t nct7363_fan_is_visible(const void *_data, u32 attr, int channel)
+{
+ const struct nct7363_data *data = _data;
+
+ switch (attr) {
+ case hwmon_fan_input:
+ if (data->fanin_mask & BIT_CHECK(channel))
+ return 0444;
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int nct7363_read_pwm(struct device *dev, u32 attr, int channel,
+ long *val)
+{
+ struct nct7363_data *data = nct7363_update_device(dev);
+ u16 ret;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ switch (attr) {
+ case hwmon_pwm_input:
+ ret = data->pwm[channel];
+ *val = (long)ret;
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int nct7363_write_pwm(struct device *dev, u32 attr, int channel,
+ long val)
+{
+ struct nct7363_data *data = nct7363_update_device(dev);
+ int ret;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ switch (attr) {
+ case hwmon_pwm_input:
+ if (val < 0 || val > 255)
+ return -EINVAL;
+ mutex_lock(&data->update_lock);
+ ret = regmap_write(data->regmap,
+ NCT7363_REG_FSCPxDUTY(channel), val);
+ if (ret == 0)
+ data->pwm[channel] = val;
+ mutex_unlock(&data->update_lock);
+ return ret;
+
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static umode_t nct7363_pwm_is_visible(const void *_data, u32 attr, int channel)
+{
+ const struct nct7363_data *data = _data;
+
+ switch (attr) {
+ case hwmon_pwm_input:
+ if (data->pwm_mask & BIT_CHECK(channel))
+ return 0644;
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int nct7363_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ switch (type) {
+ case hwmon_fan:
+ return nct7363_read_fan(dev, attr, channel, val);
+ case hwmon_pwm:
+ return nct7363_read_pwm(dev, attr, channel, val);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int nct7363_write(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long val)
+{
+ switch (type) {
+ case hwmon_pwm:
+ return nct7363_write_pwm(dev, attr, channel, val);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static umode_t nct7363_is_visible(const void *data,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ switch (type) {
+ case hwmon_fan:
+ return nct7363_fan_is_visible(data, attr, channel);
+ case hwmon_pwm:
+ return nct7363_pwm_is_visible(data, attr, channel);
+ default:
+ return 0;
+ }
+}
+
+static const struct hwmon_channel_info *nct7363_info[] = {
+ HWMON_CHANNEL_INFO(fan,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT),
+ HWMON_CHANNEL_INFO(pwm,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT),
+ NULL
+};
+
+static const struct hwmon_ops nct7363_hwmon_ops = {
+ .is_visible = nct7363_is_visible,
+ .read = nct7363_read,
+ .write = nct7363_write,
+};
+
+static const struct hwmon_chip_info nct7363_chip_info = {
+ .ops = &nct7363_hwmon_ops,
+ .info = nct7363_info,
+};
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int nct7363_detect(struct i2c_client *client,
+ struct i2c_board_info *info)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ int vendor, chip, device;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -ENODEV;
+
+ vendor = i2c_smbus_read_byte_data(client, NCT7363_REG_VENDOR_ID);
+ if (vendor != NUVOTON_ID)
+ return -ENODEV;
+
+ chip = i2c_smbus_read_byte_data(client, NCT7363_REG_CHIP_ID);
+ if (chip != CHIP_ID)
+ return -ENODEV;
+
+ device = i2c_smbus_read_byte_data(client, NCT7363_REG_DEVICE_ID);
+ if (device != DEVICE_ID)
+ return -ENODEV;
+
+ strscpy(info->type, "nct7363", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int nct7363_init_chip(struct nct7363_data *data)
+{
+ u8 i, gpio0_3 = 0, gpio4_7 = 0, gpio10_13 = 0, gpio14_17 = 0;
+ int ret;
+
+ for (i = 0; i < NCT7363_PWM_COUNT; i++) {
+ if (i < 4) {
+ if (data->pwm_mask & BIT_CHECK(i))
+ gpio0_3 |= PWM_SEL(i);
+ if (data->fanin_mask & BIT_CHECK(i))
+ gpio10_13 |= FANIN_SEL(i);
+ } else if (i < 8) {
+ if (data->pwm_mask & BIT_CHECK(i))
+ gpio4_7 |= PWM_SEL(i);
+ if (data->fanin_mask & BIT_CHECK(i))
+ gpio14_17 |= FANIN_SEL(i);
+ } else if (i < 12) {
+ if (data->pwm_mask & BIT_CHECK(i))
+ gpio10_13 |= PWM_SEL(i);
+ if (data->fanin_mask & BIT_CHECK(i))
+ gpio0_3 |= FANIN_SEL(i);
+ } else {
+ if (data->pwm_mask & BIT_CHECK(i))
+ gpio14_17 |= PWM_SEL(i);
+ if (data->fanin_mask & BIT_CHECK(i))
+ gpio4_7 |= FANIN_SEL(i);
+ }
+ }
+
+ /* Pin Function Configuration */
+ ret = regmap_write(data->regmap, NCT7363_REG_GPIO_0_3, gpio0_3);
+ if (ret < 0)
+ return ret;
+ ret = regmap_write(data->regmap, NCT7363_REG_GPIO_4_7, gpio4_7);
+ if (ret < 0)
+ return ret;
+ ret = regmap_write(data->regmap, NCT7363_REG_GPIO_10_13, gpio10_13);
+ if (ret < 0)
+ return ret;
+ ret = regmap_write(data->regmap, NCT7363_REG_GPIO_14_17, gpio14_17);
+ if (ret < 0)
+ return ret;
+
+ /* PWM and FANIN Monitoring Enable */
+ ret = regmap_write(data->regmap, NCT7363_REG_PWMEN_0_7,
+ data->pwm_mask & 0xff);
+ if (ret < 0)
+ return ret;
+ ret = regmap_write(data->regmap, NCT7363_REG_PWMEN_8_15,
+ (data->pwm_mask >> 8) & 0xff);
+ if (ret < 0)
+ return ret;
+ ret = regmap_write(data->regmap, NCT7363_REG_FANINEN_0_7,
+ data->fanin_mask & 0xff);
+ if (ret < 0)
+ return ret;
+ ret = regmap_write(data->regmap, NCT7363_REG_FANINEN_8_15,
+ (data->fanin_mask >> 8) & 0xff);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int nct7363_present_pwm_fanin(struct device *dev,
+ struct device_node *child,
+ struct nct7363_data *data)
+{
+ struct of_phandle_args args;
+ int ret, fanin_cnt;
+ u8 *fanin_ch;
+ u8 ch, index;
+
+ ret = of_parse_phandle_with_args(child, "pwms", "#pwm-cells",
+ 0, &args);
+ if (ret)
+ return ret;
+
+ data->pwm_mask |= BIT(args.args[0]);
+
+ fanin_cnt = of_property_count_u8_elems(child, "tach-ch");
+ if (fanin_cnt < 1)
+ return -EINVAL;
+
+ fanin_ch = devm_kcalloc(dev, fanin_cnt, sizeof(*fanin_ch), GFP_KERNEL);
+ if (!fanin_ch)
+ return -ENOMEM;
+
+ ret = of_property_read_u8_array(child, "tach-ch", fanin_ch, fanin_cnt);
+ if (ret)
+ return ret;
+
+ for (ch = 0; ch < fanin_cnt; ch++) {
+ index = fanin_ch[ch];
+ data->fanin_mask |= BIT(index);
+ }
+
+ return 0;
+}
+
+static const struct regmap_config nct7363_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static int nct7363_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct device_node *child;
+ struct nct7363_data *data;
+ struct device *hwmon_dev;
+ int ret;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->regmap = devm_regmap_init_i2c(client, &nct7363_regmap_config);
+ if (IS_ERR(data->regmap))
+ return PTR_ERR(data->regmap);
+
+ mutex_init(&data->update_lock);
+
+ for_each_child_of_node(dev->of_node, child) {
+ ret = nct7363_present_pwm_fanin(dev, child, data);
+ if (ret) {
+ of_node_put(child);
+ return ret;
+ }
+ }
+
+ /* Initialize the chip */
+ ret = nct7363_init_chip(data);
+ if (ret)
+ return ret;
+
+ hwmon_dev =
+ devm_hwmon_device_register_with_info(dev, client->name, data,
+ &nct7363_chip_info, NULL);
+ return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static struct i2c_driver nct7363_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "nct7363",
+ .of_match_table = nct7363_of_match,
+ },
+ .probe = nct7363_probe,
+ .id_table = nct7363_id,
+ .detect = nct7363_detect,
+ .address_list = normal_i2c,
+};
+
+module_i2c_driver(nct7363_driver);
+
+MODULE_AUTHOR("CW Ho <cwho at nuvoton.com>");
+MODULE_AUTHOR("Ban Feng <kcfeng0 at nuvoton.com>");
+MODULE_DESCRIPTION("NCT7363 Hardware Monitoring Driver");
+MODULE_LICENSE("GPL");
--
2.34.1
More information about the openbmc
mailing list