New User added ,not able to access through LAN with ipmitool lanplus command

[Radhai Ezhil Murugan]

Hi,
I have added new user with administator privilege and ipmi =on
D  Name             Callin  Link Auth  IPMI Msg   Channel Priv Limit
1   root             false   true       true       ADMINISTRATOR
2   operator1        true    true       true       ADMINISTRATOR
3                    true    false      false      NO ACCESS
4                    true    false      false      NO ACCESS
5                    true    false      false      NO ACCESS
6                    true    false      false      NO ACCESS
7                    true    false      false      NO ACCESS
8                    true    false      false      NO ACCESS
9                    true    false      false      NO ACCESS
10                   true    false      false      NO ACCESS
11                   true    false      false      NO ACCESS
12                   true    false      false      NO ACCESS
13                   true    false      false      NO ACCESS
14                   true    false      false      NO ACCESS
15                   true    false      false      NO ACCESS

and acess level for both root user and LAN user are same

radhai at radhai-ThinkPad-T495:~$ ipmitool -C 17 -H 192.168.1.211 -I lanplus -U root -P 0penBmc  channel getaccess 1 2
Maximum User IDs     : 15
Enabled User IDs     : 2

User ID              : 2
User Name            : operator1
Fixed Name           : No
Access Available     : call-in / callback
Link Authentication  : enabled
IPMI Messaging       : enabled
Privilege Level      : ADMINISTRATOR
Enable Status        : enabled
radhai at radhai-ThinkPad-T495:~$ ipmitool -C 17 -H 192.168.1.211 -I lanplus -U root -P 0penBmc  channel getaccess 1 1
Maximum User IDs     : 15
Enabled User IDs     : 2

User ID              : 1
User Name            : root
Fixed Name           : No
Access Available     : callback
Link Authentication  : enabled
IPMI Messaging       : enabled
Privilege Level      : ADMINISTRATOR
Enable Status        : enabled

but new user not able to establish connection with ipmitool lanplus command

radhai at radhai-ThinkPad-T495:~$ ipmitool -C 17 -H 192.168.1.211 -I lanplus -U operator1 -P password1234 power status
Error: Unable to establish IPMI v2 / RMCP+ session


I need establish LAN access for new user

Please advise

Thank you ,
Radhai
::DISCLAIMER::
________________________________
The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects.
________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20231220/eb8c9ac6/attachment-0001.htm>