[PATCH v2] ARM: dts: aspeed: Add IEISystems FP5280G3 BMC machine
George Liu
liuxiwei1013 at gmail.com
Wed Dec 20 20:50:04 AEDT 2023
The IEISystems FP5280G3 is a power platform server with an
AST2600-based BMC.
This dts file provides a basic configuration for its OpenBMC
development.
Signed-off-by: George Liu <liuxiwei at ieisystem.com>
---
v1 -> v2
- Include ibm-power10-quad.dtsi
- Remove redundant blank lines
- Remove nct7362 driver
- Remove bus-timeout-ms & bus-recover-timeout-ms
- Remove reset-mask1
---
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../aspeed/aspeed-bmc-ieisystems-fp5280g3.dts | 966 ++++++++++++++++++
2 files changed, 967 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ieisystems-fp5280g3.dts
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index fb9cc95f1b60..6017ff5b7959 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -36,6 +36,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-ibm-rainier.dtb \
aspeed-bmc-ibm-rainier-1s4u.dtb \
aspeed-bmc-ibm-rainier-4u.dtb \
+ aspeed-bmc-ieisystems-fp5280g3.dtb \
aspeed-bmc-intel-s2600wf.dtb \
aspeed-bmc-inspur-fp5280g2.dtb \
aspeed-bmc-inspur-nf5280m6.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ieisystems-fp5280g3.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ieisystems-fp5280g3.dts
new file mode 100644
index 000000000000..51f0c8903b63
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ieisystems-fp5280g3.dts
@@ -0,0 +1,966 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2023, IEISystems Corporation
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+ model = "FP5280G3 BMC";
+ compatible = "ieisystems,fp5280g3-bmc", "aspeed,ast2600";
+
+ aliases {
+ i2c2001 = &i2c2s0ch1;
+ i2c2002 = &i2c2s0ch2;
+ i2c5000 = &i2c5s0ch0;
+ i2c5001 = &i2c5s0ch1;
+ i2c5002 = &i2c5s0ch2;
+ i2c5003 = &i2c5s0ch3;
+ i2c6000 = &i2c6s0ch0;
+ i2c6001 = &i2c6s0ch1;
+ i2c6002 = &i2c6s0ch2;
+ i2c6003 = &i2c6s0ch3;
+ i2c6004 = &i2c6s0ch4;
+ i2c6005 = &i2c6s0ch5;
+ i2c6100 = &i2c6s1ch0;
+ i2c6101 = &i2c6s1ch1;
+ i2c6200 = &i2c6s2ch0;
+ i2c6201 = &i2c6s2ch1;
+ i2c12000 = &i2c12s0ch0;
+ i2c12001 = &i2c12s0ch1;
+ i2c12002 = &i2c12s0ch2;
+ i2c12003 = &i2c12s0ch3;
+ i2c12100 = &i2c12s1ch0;
+ i2c12101 = &i2c12s1ch1;
+ i2c12102 = &i2c12s1ch2;
+ i2c13000 = &i2c13s0ch0;
+ i2c13001 = &i2c13s0ch1;
+ i2c13002 = &i2c13s0ch2;
+ i2c13003 = &i2c13s0ch3;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200n8 earlycon";
+ };
+
+ memory at 80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ramoops at b3e00000 {
+ compatible = "ramoops";
+ reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+ record-size = <0x8000>;
+ console-size = <0x8000>;
+ ftrace-size = <0x8000>;
+ pmsg-size = <0x8000>;
+ max-reason = <3>; /* KMSG_DUMP_EMERG */
+ };
+
+ /* LPC FW cycle bridge region requires natural alignment */
+ flash_memory: region at b4000000 {
+ no-map;
+ reg = <0xb4000000 0x04000000>; /* 64M */
+ };
+
+ /* VGA region is dictated by hardware strapping */
+ vga_memory: region at bf000000 {
+ no-map;
+ compatible = "shared-dma-pool";
+ reg = <0xbf000000 0x01000000>; /* 16M */
+ };
+
+ video_engine_memory: jpegbuffer {
+ size = <0x02000000>; /* 32M */
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>,
+ <&adc0 3>, <&adc0 4>, <&adc0 5>, <&adc0 6>,
+ <&adc0 7>, <&adc1 0>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ cpld {
+ label = "cpld";
+ gpios = <&gpio0 ASPEED_GPIO(S, 4) GPIO_ACTIVE_HIGH>;
+ linux,code = <ASPEED_GPIO(S, 4)>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ bmc-heart-beat {
+ gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ bmc-init-ok {
+ gpios = <&gpio0 ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ chassis-power-on {
+ gpios = <&gpio0 ASPEED_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ bmc-bootup {
+ gpios = <&gpio0 ASPEED_GPIO(S, 0) GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ fan-watchdog {
+ label = "fan-watchdog";
+ gpios = <&gpio0 ASPEED_GPIO(E, 0) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+ };
+
+};
+
+&adc0 {
+ status = "okay";
+ aspeed,int-vref-microvolt = <2500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default
+ &pinctrl_adc1_default
+ &pinctrl_adc2_default
+ &pinctrl_adc3_default
+ &pinctrl_adc4_default
+ &pinctrl_adc5_default
+ &pinctrl_adc6_default
+ &pinctrl_adc7_default>;
+};
+
+&adc1 {
+ status = "okay";
+ aspeed,int-vref-microvolt = <2500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc8_default>;
+};
+
+&gpio0 {
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "","","","","","","","",
+ /*C0-C7*/ "","","","","","","","",
+ /*D0-D7*/ "","","","","","","","",
+ /*E0-E7*/ "","","","","","","","",
+ /*F0-F7*/ "","","","","","","","",
+ /*G0-G7*/ "","","","","","","","",
+ /*H0-H7*/ "","","","","","","","",
+ /*I0-I7*/ "","","","","","","","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "","","","","SCM_CPLD_UPDATE_HITLESS","","","",
+ /*O0-O7*/ "","","","","","","","",
+ /*P0-P7*/ "","","","","","","","",
+ /*Q0-Q7*/ "","","","","","FM_PSU1_PRSNT_N","FM_PSU0_PRSNT_N","MB_CPLD_UPDATE_HITLESS",
+ /*R0-R7*/ "","","","checkstop","","","power-chassis-control","power-button",
+ /*S0-S7*/ "","","POSTFINISH","","","FM_BATTERY_SENSE_EN","","",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","","","","power-chassis-good","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","","","","","","","",
+ /*Z0-Z7*/ "","","","","","","","";
+};
+
+&mdio1 {
+ status = "okay";
+
+ ethphy1: ethernet-phy at 0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+};
+
+&mac2 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ phy-handle = <ðphy1>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+ status = "okay";
+
+ phy-mode = "rmii";
+ use-ncsi;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii4_default>;
+};
+
+&emmc_controller {
+ status = "okay";
+};
+
+&pinctrl_emmc_default {
+ bias-disable;
+};
+
+&emmc {
+ status = "okay";
+ clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+#include "ibm-power10-quad.dtsi"
+&fsim0 {
+ cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+};
+
+&i2c1 {
+ status = "okay";
+ tmp112 at 48{
+ compatible = "ti,tmp112";
+ reg = <0x48>;
+ label = "Sys_Outlet_Temp";
+ };
+
+ eeprom at 50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+ tmp112 at 40{
+ compatible = "ti,tmp112";
+ reg = <0x48>;
+ label = "Inlet_Temp";
+ };
+
+ pca9548 at 70{
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ i2c2s0ch1: i2c at 1{
+ reg = <1>;
+ tmp112 at 49{
+ compatible = "ti,tmp112";
+ reg = <0x49>;
+ label = "PSU_Inlet0_Temp";
+ };
+ tmp112 at 4a{
+ compatible = "ti,tmp112";
+ reg = <0x4a>;
+ label = "PSU_Inlet1_Temp";
+ };
+ };
+ i2c2s0ch2: i2c at 2{
+ reg = <2>;
+ tmp112 at 49{
+ compatible = "ti,tmp112";
+ reg = <0x49>;
+ label = "L_OCP_ZONE_Temp";
+ };
+ tmp112 at 4a{
+ compatible = "ti,tmp112";
+ reg = <0x4a>;
+ label = "R_OCP_ZONE_Temp";
+ };
+ };
+ };
+
+ pca0:pca9555 at 20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "OCP0_CABLE_PRSNT_N", "OCP0_BIF2_N",
+ "OCP0_BIF1_N", "OCP0_BIF0_N",
+ "OCP0_CARD_PRSNTB3_ISO_N", "OCP0_CARD_PRSNTB2_ISO_N",
+ "OCP0_CARD_PRSNTB1_ISO_N", "OCP0_CARD_PRSNTB0_ISO_N",
+ "PE_MCIO0_BP_ID0_Q_N", "PE_MCIO0_BP_ID1_Q_N",
+ "PE_MCIO1_BP_ID0_Q_N", "PE_MCIO1_BP_ID1_Q_N",
+ "PE_MCIO2_BP_ID0_Q_N", "PE_MCIO2_BP_ID1_Q_N",
+ "RISER0_PRSNT_N", "REAR_HDD_PRSNT_N";
+ };
+ pca1:pca9555 at 21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "OCP1_CABLE_PRSNT_N", "OCP1_BIF2_N",
+ "OCP1_BIF1_N", "OCP1_BIF0_N",
+ "OCP1_CARD_PRSNTB3_ISO_N", "OCP1_CARD_PRSNTB2_ISO_N",
+ "OCP1_CARD_PRSNTB1_ISO_N", "OCP1_CARD_PRSNTB0_ISO_N",
+ "PE_MCIO3_BP_ID0_Q_N", "PE_MCIO3_BP_ID1_Q_N",
+ "PE_MCIO4_BP_ID0_Q_N", "PE_MCIO4_BP_ID1_Q_N",
+ "PE_MCIO5_BP_ID0_Q_N", "PE_MCIO5_BP_ID1_Q_N",
+ "RISER2_PRSNT_N", "RISER1_PRSNT_N";
+ };
+ pca2:pca9555 at 22 {
+ compatible = "nxp,pca9555";
+ reg = <0x22>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "RISER2_BOARD_ID1_N", "RISER2_BOARD_ID0_N",
+ "RISER1_BOARD_ID2_N", "RISER1_BOARD_ID1_N",
+ "RISER1_BOARD_ID0_N", "RISER0_BOARD_ID2_N",
+ "RISER0_BOARD_ID1_N", "RISER0_BOARD_ID0_N",
+ "PE_MCIO6_BP_ID0_Q_N", "PE_MCIO6_BP_ID1_Q_N",
+ "PE_MCIO7_BP_ID0_Q_N", "PE_MCIO7_BP_ID1_Q_N",
+ "PE_MCIO8_BP_ID0_Q_N", "PE_MCIO8_BP_ID1_Q_N",
+ "PE_MCIO9_BP_ID0_Q_N", "PE_MCIO9_BP_ID0_Q_N";
+ };
+ pca3:pca9555 at 23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "", "",
+ "", "",
+ "", "",
+ "", "RISER2_BOARD_ID2_N",
+ "PE_MCIO10_BP_ID0_Q_N", "PE_MCIO10_BP_ID1_Q_N",
+ "PE_MCIO7_BP_ID11_Q_N", "PE_MCIO11_BP_ID1_Q_N",
+ "PE_MCIO12_BP_ID0_Q_N", "PE_MCIO12_BP_ID1_Q_N",
+ "PE_MCIO13_BP_ID0_Q_N", "PE_MCIO13_BP_ID0_Q_N";
+ };
+};
+
+&i2c3 {
+ status = "okay";
+ pca9548 at 70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ };
+};
+
+&i2c5 {
+ status = "okay";
+ pca9546 at 70{
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ i2c5s0ch0: i2c at 0 {
+ reg = <0>;
+ status = "okay";
+ cpu0vdda at 60 {
+ compatible = "infineon,xdpe132g5c";
+ reg = <0x60>;
+ };
+ cpu0vddb at 61 {
+ compatible = "infineon,xdpe132g5c";
+ reg = <0x61>;
+ };
+ cpu0vdn at 72 {
+ compatible = "infineon,ir35221";
+ reg = <0x72>;
+ };
+ cpu0vio at 73 {
+ compatible = "infineon,ir35221";
+ reg = <0x73>;
+ };
+ cpu0vpci at 74 {
+ compatible = "infineon,ir35221";
+ reg = <0x74>;
+ };
+ };
+ i2c5s0ch1: i2c at 1{
+ reg = <1>;
+ status = "okay";
+ cpu1vddc at 60 {
+ compatible = "infineon,xdpe132g5c";
+ reg = <0x60>;
+ };
+ cpu1vddd at 61 {
+ compatible = "infineon,xdpe132g5c";
+ reg = <0x61>;
+ };
+ cpu1vdn at 72 {
+ compatible = "infineon,ir35221";
+ reg = <0x72>;
+ };
+ cpu1vio at 73 {
+ compatible = "infineon,ir35221";
+ reg = <0x73>;
+ };
+ cpu1vpci at 74 {
+ compatible = "infineon,ir35221";
+ reg = <0x74>;
+ };
+ };
+ i2c5s0ch2: i2c at 2{
+ reg = <2>;
+ status = "okay";
+ pxe1610 at 6c {
+ compatible = "infineon,pxe1610";
+ reg = <0x6c>;
+ };
+ rdimm at 74 {
+ compatible = "infineon,pxe1610";
+ reg = <0x74>;
+ };
+ mdimm at 54 {
+ compatible = "infineon,pxe1610";
+ reg = <0x5A>;
+ };
+ ldimm at 44 {
+ compatible = "infineon,pxe1610";
+ reg = <0x5C>;
+ };
+ };
+ i2c5s0ch3: i2c at 3{
+ reg = <3>;
+ };
+ };
+};
+
+&i2c6 {
+ /* SMB_TEMPSENSOR_STBY_LVC3_R */
+ multi-master;
+ status = "okay";
+
+ i2c-switch at 70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c6s0ch0: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ eeprom at 50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+
+ tmp1413 at 4c {
+ compatible = "microchip,emc1413";
+ reg = <0x4c>;
+ };
+ };
+ i2c6s0ch1: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ eeprom at 50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+
+ tmp1413 at 4c {
+ compatible = "microchip,emc1413";
+ reg = <0x4c>;
+ };
+ };
+ i2c6s0ch2: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ eeprom at 50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+
+ tmp1413 at 4c {
+ compatible = "microchip,emc1413";
+ reg = <0x4c>;
+ };
+ };
+ i2c6s0ch3: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ eeprom at 50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+
+ tmp1413 at 4c {
+ compatible = "microchip,emc1413";
+ reg = <0x4c>;
+ };
+
+ pca9548 at 71 {
+ compatible = "nxp,pca9548";
+ reg = <0x71>;
+ i2c-mux-idle-disconnect;
+
+ i2c6s1ch0: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c6s1ch1: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+ };
+ i2c6s0ch4: i2c at 4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ eeprom at 50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+
+ tmp1413 at 4c {
+ compatible = "microchip,emc1413";
+ reg = <0x4c>;
+ };
+
+ pca9548 at 71 {
+ compatible = "nxp,pca9548";
+ reg = <0x71>;
+ i2c-mux-idle-disconnect;
+
+ i2c6s2ch0: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c6s2ch1: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+ };
+ i2c6s0ch5: i2c at 5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+
+ eeprom at 50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+
+ tmp1413 at 4c {
+ compatible = "microchip,emc1413";
+ reg = <0x4c>;
+ };
+ };
+ };
+};
+
+&i2c7 {
+ status = "okay";
+ adc128d818 at 1d{
+ compatible = "ti,adc128d818";
+ reg = <0x1d>;
+ ti,mode = /bits/ 8 <0x01>;
+ };
+
+ adc128d818 at 1e{
+ compatible = "ti,adc128d818";
+ reg = <0x1e>;
+ ti,mode = /bits/ 8 <0x01>;
+ };
+
+ adc128d818 at 1f{
+ compatible = "ti,adc128d818";
+ reg = <0x1f>;
+ ti,mode = /bits/ 8 <0x01>;
+ };
+
+ adc128d818 at 2d{
+ compatible = "ti,adc128d818";
+ reg = <0x2d>;
+ ti,mode = /bits/ 8 <0x01>;
+ };
+
+ adc128d818 at 2e{
+ compatible = "ti,adc128d818";
+ reg = <0x2e>;
+ ti,mode = /bits/ 8 <0x01>;
+ };
+
+ adc128d818 at 2f{
+ compatible = "ti,adc128d818";
+ reg = <0x2f>;
+ ti,mode = /bits/ 8 <0x01>;
+ };
+
+ adc128d818 at 35{
+ compatible = "ti,adc128d818";
+ reg = <0x35>;
+ ti,mode = /bits/ 8 <0x01>;
+ };
+
+ adc128d818 at 36{
+ compatible = "ti,adc128d818";
+ reg = <0x36>;
+ ti,mode = /bits/ 8 <0x01>;
+ };
+
+ adc128d818 at 37{
+ compatible = "ti,adc128d818";
+ reg = <0x37>;
+ ti,mode = /bits/ 8 <0x01>;
+ };
+};
+
+&i2c8 {
+ status = "okay";
+
+ pca9555 at 24{
+ compatible = "nxp,pca9555";
+ reg = <0x24>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "FAN_PRSNT5_D_N", "FAN_PRSNT4_D_N",
+ "FAN_PRSNT3_D_N", "FAN_PRSNT2_D_N",
+ "FAN_PRSNT1_D_N", "FAN_PRSNT0_D_N",
+ "", "",
+ "", "", "", "",
+ "", "", "", "";
+ };
+
+ eeprom at 51 {
+ compatible = "atmel,24c256";
+ reg = <0x51>;
+ };
+
+};
+
+&i2c9 {
+ status = "okay";
+
+ eeprom at 50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+
+ eeprom at 51 {
+ compatible = "atmel,24c256";
+ reg = <0x51>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+ pca9555 at 20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "DIMM0_FAULT", "DIMM3_FAULT",
+ "DIMM2_FAULT", "DIMM1_FAULT",
+ "DIMM4_FAULT", "DIMM5_FAULT",
+ "DIMM6_FAULT", "DIMM7_FAULT",
+ "DIMM8_FAULT", "DIMM11_FAULT",
+ "DIMM10_FAULT", "DIMM9_FAULT",
+ "DIMM12_FAULT", "DIMM13_FAULT",
+ "DIMM14_FAULT", "DIMM15_FAULT";
+ };
+
+ pca9555 at 22 {
+ compatible = "nxp,pca9555";
+ reg = <0x22>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "", "", "", "", "OCP0_PRSNT_N", "", "", "",
+ "", "", "", "", "", "", "", "";
+ };
+
+ pca9555 at 23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "", "", "", "", "OCP1_PRSNT_N", "", "", "",
+ "", "", "", "", "", "", "", "";
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ eeprom at 51 {
+ compatible = "atmel,24c256";
+ reg = <0x51>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+ pca9546 at 70{
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+ i2c12s0ch0: i2c at 0{
+ reg = <0>;
+ tmp112 at 48{
+ compatible = "ti,tmp112";
+ reg = <0x48>;
+ label = "PCIE_INLET_0";
+ };
+
+ eeprom at 50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+
+ pca9555 at 24 {
+ compatible = "nxp,pca9555";
+ reg = <0x24>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "RISER0_BOARD_ID7", "RISER0_BOARD_ID6",
+ "RISER0_BOARD_ID5", "RISER0_BOARD_ID4",
+ "RISER0_BOARD_ID3", "RISER0_BOARD_ID2",
+ "RISER0_BOARD_ID1", "RISER0_BOARD_ID0",
+ "RISER0_SLOT2_PRSNT", "RISER0_SLOT1_PRSNT_X8",
+ "RISER0_SLOT0_PRSNT_X8", "RISER0_SLOT1_PRSNT_X16",
+ "RISER0_SLOT0_PRSNT_X16", "", "", "";
+ };
+ };
+ i2c12s0ch1: i2c at 1{
+ reg = <1>;
+ };
+ i2c12s0ch2: i2c at 2{
+ reg = <2>;
+ };
+ i2c12s0ch3: i2c at 3{
+ reg = <3>;
+ };
+ };
+
+ pca9546 at 71{
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ i2c-mux-idle-disconnect;
+ i2c12s1ch0: i2c at 0{
+ reg = <0>;
+ tmp112 at 48{
+ compatible = "ti,tmp112";
+ reg = <0x48>;
+ label = "PCIE_INLET_2";
+ };
+
+ eeprom at 50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+
+ pca9555 at 24 {
+ compatible = "nxp,pca9555";
+ reg = <0x24>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "RISER2_BOARD_ID0", "RISER2_BOARD_ID1",
+ "RISER2_BOARD_ID2", "RISER2_BOARD_ID3",
+ "RISER2_BOARD_ID4", "RISER2_BOARD_ID5",
+ "RISER2_BOARD_ID6", "RISER2_BOARD_ID7",
+ "RISER2_SLOT0_PRSNT", "RISER2_SLOT1_PRSNT",
+ "", "", "", "", "", "";
+ };
+ };
+ i2c12s1ch1: i2c at 1{
+ reg = <1>;
+ };
+ i2c12s1ch2: i2c at 2{
+ reg = <2>;
+ };
+ };
+};
+
+&i2c13 {
+ status = "okay";
+ pca9546 at 70{
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+ i2c13s0ch0: i2c at 0{
+ reg = <0>;
+ tmp112 at 48{
+ compatible = "ti,tmp112";
+ reg = <0x48>;
+ label = "PCIE_INLET_1";
+ };
+
+ eeprom at 50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+
+ pca9555 at 24 {
+ compatible = "nxp,pca9555";
+ reg = <0x24>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names =
+ "RISER1_BOARD_ID7", "RISER1_BOARD_ID6",
+ "RISER1_BOARD_ID5", "RISER1_BOARD_ID4",
+ "RISER1_BOARD_ID3", "RISER1_BOARD_ID2",
+ "RISER1_BOARD_ID1", "RISER1_BOARD_ID0",
+ "RISER1_SLOT2_PRSNT", "RISER1_SLOT1_PRSNT_X8",
+ "RISER1_SLOT0_PRSNT_X8", "RISER1_SLOT1_PRSNT_X16",
+ "RISER1_SLOT0_PRSNT_X16", "", "", "";
+ };
+ };
+ i2c13s0ch1: i2c at 1{
+ reg = <1>;
+ };
+ i2c13s0ch2: i2c at 2{
+ reg = <2>;
+ };
+ i2c13s0ch3: i2c at 3{
+ reg = <3>;
+ };
+ };
+};
+
+&i2c14 {
+ status = "okay";
+};
+
+&i2c15 {
+ status = "okay";
+};
+
+&ibt {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&vuart1 {
+ status = "okay";
+};
+
+&vuart2 {
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+};
+
+&wdt1 {
+ status = "okay";
+};
+
+&kcs2 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca2>;
+ aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&vhub {
+ status = "okay";
+};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
+
+&gfx {
+ status = "okay";
+ memory-region = <&gfx_memory>;
+};
--
2.34.1
More information about the openbmc
mailing list