OpenBMC Linux 6.6

[Tomer Maimon]

Hi Joel,

Thanks for supporting kernel 6.6

Could you add the following NPCM drivers to kernel 6.6.
   support Nuvoton NPCM Video Capture/Encode Engine
   Add Nuvoton NPCM SGPIO feature
   MMC: add NPCM SDHCI driver support
   hwmon: npcm: add Arbel NPCM8XX support
   usb: ChipIdea: add Nuvoton NPCM UDC support

On Wed, 6 Dec 2023 at 09:01, Joel Stanley <joel at jms.id.au> wrote:
>
> Hot on the heels of the last bump, here is the latest kernel base for
> the aspeed machines.
>
>   https://gerrit.openbmc.org/c/openbmc/openbmc/+/67772
>
> If you're able to test, please comment on gerrit and give the change a +1.
>
> There was a config regression due to CONFIG_EMBEDDED going away, which
> is fixed separately here:
>
>   https://gerrit.openbmc.org/c/openbmc/openbmc/+/68117
>
> Commit message for the bump follows:
>
> There are 56 patches in the tree, with 36 of those patches not
> yet queued for merging in v6.7.
>
> v6.6 is an LTS kernel as decreed by the kernel.org maintainers. The
> OpenBMC kernel maintainers encourage everyone to ship the latest kernel
> as it has the most code review and upstream code.
>
> Andrew Jeffery (6):
>       dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
>       pmbus (max31785): Add support for devicetree configuration
>       pmbus (core): One-shot retries for failure to set page
>       pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
>       ARM: dts: aspeed: witherspoon: Update max31785 node
>       ipmi: kcs_bmc: Add a "raw" character device interface
>
> Cédric Le Goater (1):
>       /dev/mem: add a devmem kernel parameter to activate the device
>
> Eddie James (19):
>       dt-bindings: soc: Add Aspeed XDMA Engine
>       soc: aspeed: Add XDMA Engine Driver
>       soc: aspeed: xdma: Add user interface
>       soc: aspeed: xdma: Add reset ioctl
>       soc: aspeed: xdma: Add trace events
>       i2c: core: Add mux root adapter operations
>       iio: si7020: Lock root adapter to wait for reset
>       eeprom: ee1004: Enable devices on multiple busses
>       dt-bindings: trivial-devices: Add Atmel AT30TSE004A serial eeprom
>       eeprom: ee1004: Add OF matching support
>       leds: pca955x: Refactor with helper functions and renaming
>       leds: pca955x: Use pointers to driver data rather than I2C client
>       leds: pca955x: Optimize probe led selection
>       leds: pca955x: Add HW blink support
>       leds: Ensure hardware blinking turns off when requested
>       ARM: dts: aspeed: Rainier: Add fan controller properties
>       ARM: dts: aspeed: Everest: Add fan controller properties
>       ARM: dts: aspeed: Bonnell: Add fan controller properties
>       ARM: dts: aspeed: Rainier 4U: Delete fan dual-tach properties
>
> Jae Hyun Yoo (1):
>       clk: ast2600: enable BCLK for PCI/PCIe bus always
>
> Joel Stanley (7):
>       net: ftgmac100: Ensure tx descriptor updates are visible
>       ARM: aspeed: Add debugfs directory
>       ARM: soc: aspeed: Add secure boot controller support
>       dt-bindings: trivial-devices: Remove Infineon SLB9673 TPM
>       ARM: dts: nuvoton: npmc750-evb: Add default console
>       tpm: tis-i2c: Add more compatible strings
>       leds: pca955x: Revert "Remove the unused function pca95xx_num_led_regs()"
>
> Johannes Holland (1):
>       dt-bindings: tpm: Add schema for TIS I2C devices
>
> Potin Lai (1):
>       mtd: spi-nor: winbond: Add support for w25q01jvq
>
> Change-Id: I8b756421a7da84c0070e2ad4ac84a93984703457
> Signed-off-by: Joel Stanley <joel at jms.id.au>

Thanks,

Tomer