[PATCH v2 2/3] spi: wpcm-fiu: Add driver for Nuvoton WPCM450 Flash Interface Unit (FIU)

[Mark Brown]

On Fri, Nov 25, 2022 at 05:33:31PM +0100, Jonathan Neuschäfer wrote:

> As to connecting non-memory chips: There is also a second, completely
> different SPI controller in this SoC, which is used on some boards (in
> factory configuration) to drive a little status LCD. I think it would be
> easiest to use that one for custom hardware extensions.

That's never stopped hardware engineers.  Perhaps it's simpler for
pinmuxing, layout or other reasons in a given design.

> > If the driver were implementing regular SPI operations and advertising
> > a maximum transfer length this should just work without having to jump
> > through hoops.  The core can split transfers up into sections that fit
> > within the controller limits transparently.

> As far as I'm aware, the controller is not capable of performing a pure
> read transfer, because the command byte (a byte that is written, in
> half-duplex) is always included at the start. I think this limitation
> would break your idea.

> IOW, the hoops aren't nice, but I think they're necessary.

Ah, I see.  That is very limiting.  I'm very surprised that the
6 byte thing works at all TBH.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20221125/626c9c6f/attachment.sig>