[PATCH v5 0/6] Nuvoton WPCM450 clock and reset driver

[Daniel Lezcano]

On 22/11/2022 02:40, Joel Stanley wrote:
> On Fri, 4 Nov 2022 at 16:21, Jonathan Neuschäfer <j.neuschaefer at gmx.net> wrote:
>>
>> This series adds support for the clock and reset controller in the Nuvoton
>> WPCM450 SoC. This means that the clock rates for peripherals will be calculated
>> automatically based on the clock tree as it was preconfigured by the bootloader.
>> The 24 MHz dummy clock, that is currently in the devicetree, is no longer needed.
>> Somewhat unfortunately, this also means that there is a breaking change once
>> the devicetree starts relying on the clock driver, but I find it acceptable in
>> this case, because WPCM450 is still at a somewhat early stage.
> 
> Reviewed-by: Joel Stanley <joel at jms.id.au>
> 
>>
>>
>> Upstreaming plan (although other suggestions are welcome):
>>
>> Once reviewed,
>>
>> - The ARM/dts changes should go through Joel Stanley's bmc tree
> 
> I've picked up the standalone patch ("Add clock controller node").
> 
>> - The clocksource/timer changes should probably go via Daniel Lezcano and TIP

I picked the timer change along with the binding