[PATCH v2 2/3] arm: dts: nuvoton: npcm7xx: add sgpio node

[Jim Liu]

Add the SGPIO controller to the NPCM750 devicetree

Signed-off-by: Jim Liu <JJLIU0 at nuvoton.com>
---
Changes for v2:
   - modify dts node 
---
 arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi | 30 +++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
index c7b5ef15b716..9cac60734b57 100644
--- a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
+++ b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
@@ -330,6 +330,36 @@
 				status = "disabled";
 			};
 
+			sgpio1: sgpio at 101000 {
+				compatible = "nuvoton,npcm750-sgpio";
+				reg = <0x101000 0x200>;
+				clocks = <&clk NPCM7XX_CLK_APB3>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				bus-frequency = <16000000>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&iox1_pins>;
+				nin_gpios = <64>;
+				nout_gpios = <64>;
+				status = "disabled";
+			};
+
+			sgpio2: sgpio at 102000 {
+				compatible = "nuvoton,npcm750-sgpio";
+				reg = <0x102000 0x200>;
+				clocks = <&clk NPCM7XX_CLK_APB3>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				bus-frequency = <16000000>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&iox2_pins>;
+				nin_gpios = <64>;
+				nout_gpios = <64>;
+				status = "disabled";
+			};
+
 			pwm_fan: pwm-fan-controller at 103000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-- 
2.17.1