[PATCH u-boot v2019.04-aspeed-openbmc v3 2/3] arm/mach-aspeed: Add support for CONFIG_DRAM_UART_TO_UART1

[Patrick Rudolph]

Update the Kconfig and allow a board to use CONFIG_DRAM_UART_TO_UART1.
The platform code already uses this Kconfig symbol, but it always
evaluated to false.
This is required on IBM/Genesis3 as it uses RDX1/TDX1 as debug uart.

Signed-off-by: Patrick Rudolph <patrick.rudolph at 9elements.com>
Reviewed-by: Joel Stanley <joel at jms.id.au>
---
 arch/arm/mach-aspeed/ast2500/Kconfig | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/mach-aspeed/ast2500/Kconfig b/arch/arm/mach-aspeed/ast2500/Kconfig
index 4f992f442d..e7ff00cdba 100644
--- a/arch/arm/mach-aspeed/ast2500/Kconfig
+++ b/arch/arm/mach-aspeed/ast2500/Kconfig
@@ -17,6 +17,12 @@ config TARGET_EVB_AST2500
 	  20 pin JTAG, pinouts for 14 I2Cs, 3 SPIs and eSPI, 8 PWMs.
 endchoice
 
+config DRAM_UART_TO_UART1
+	bool
+	prompt "Route debug UART to UART1"
+	help
+	  Route debug UART to TXD1/RXD1 pins.
+
 source "board/aspeed/evb_ast2500/Kconfig"
 
 endif
-- 
2.35.3