[PATCH v2 1/5] arm: dts: Add node for NPCM Video Capture/Encode Engine

[Paul Menzel]

Dear Marvin,


Thank you for the patch.

Am 13.05.22 um 05:34 schrieb Marvin Lin:
> Add node for Video Capture/Differentiation Engine (VCD) and Encoding
> Compression Engine (ECE) present on Nuvoton NPCM SoCs.

Could you please add the datasheet name and revision to the commit message?

What board did you test this on?

> Signed-off-by: Marvin Lin <kflin at nuvoton.com>

As you sent this from your Google Mail account, that address is going to 
be used in the author field. Is your Nuvoton address configured for git?

     git config user.email

Then I would have thought, that that address is also in the files 
generated by `git format-patch`.


Kind regards,

Paul


> ---
>   arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi | 19 +++++++++++++++++++
>   1 file changed, 19 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
> index 3696980a3da1..0d2df74974bf 100644
> --- a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
> +++ b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
> @@ -178,6 +178,19 @@
>   			status = "disabled";
>   		};
>   
> +		video: video at f0810000 {
> +			compatible = "nuvoton,npcm750-video";
> +			reg = <0xf0810000 0x10000>, <0xf0820000 0x2000>;
> +			reg-names = "vcd", "ece";
> +			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
> +			resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_VCD>,
> +				 <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_ECE>;
> +			reset-names = "vcd", "ece";
> +			nuvoton,syscon-gcr = <&gcr>;
> +			nuvoton,syscon-gfxi = <&gfxi>;
> +			status = "disabled";
> +		};
> +
>   		apb {
>   			#address-cells = <1>;
>   			#size-cells = <1>;
> @@ -553,6 +566,12 @@
>   				pinctrl-0 = <&smb15_pins>;
>   				status = "disabled";
>   			};
> +
> +			gfxi: gfxi at e000 {
> +				compatible = "nuvoton,npcm750-gfxi", "syscon",
> +					     "simple-mfd";
> +				reg = <0xe000 0x100>;
> +			};
>   		};
>   	};
>