[PATCH v2 2/2] extcon: Add extcon-regulator driver
Zev Weiss
zev at bewilderbeest.net
Fri May 6 09:25:57 AEST 2022
This driver supports power connectors supplied by a regulator, such as
outlets on a power distribution unit (PDU).
Its extcon functionality is currently quite limited, since the
hardware it's initially targeting is very simple and doesn't really
provide anything for the driver to interact with, but it can be
extended as required for hardware that might offer more for it to do
(e.g. a presence-detection mechanism).
Its sole feature is a read/write sysfs attribute allowing userspace to
switch the output on and off by enabling and disabling the supply
regulator.
Signed-off-by: Zev Weiss <zev at bewilderbeest.net>
---
.../ABI/testing/sysfs-driver-extcon-regulator | 8 ++
MAINTAINERS | 8 ++
drivers/extcon/Kconfig | 8 ++
drivers/extcon/Makefile | 1 +
drivers/extcon/extcon-regulator.c | 133 ++++++++++++++++++
5 files changed, 158 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-driver-extcon-regulator
create mode 100644 drivers/extcon/extcon-regulator.c
diff --git a/Documentation/ABI/testing/sysfs-driver-extcon-regulator b/Documentation/ABI/testing/sysfs-driver-extcon-regulator
new file mode 100644
index 000000000000..b2f3141a1c49
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-extcon-regulator
@@ -0,0 +1,8 @@
+What: /sys/bus/platform/drivers/extcon-regulator/*/state
+Date: May 2022
+KernelVersion: 5.18
+Contact: Zev Weiss <zev at bewilderbeest.net>
+Description: When read, provides the current power state of the connector,
+ either "on" or "off". Either string may also be written to
+ set the power state of the connector.
+Users: OpenBMC <openbmc at lists.ozlabs.org>
diff --git a/MAINTAINERS b/MAINTAINERS
index edc96cdb85e8..c30b6cf95ff1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16740,6 +16740,14 @@ F: Documentation/devicetree/bindings/regmap/
F: drivers/base/regmap/
F: include/linux/regmap.h
+REGULATOR EXTCON DRIVER
+M: Zev Weiss <zev at bewilderbeest.net>
+L: openbmc at lists.ozlabs.org
+S: Maintained
+F: Documentation/ABI/testing/sysfs-driver-extcon-regulator
+F: Documentation/devicetree/bindings/connector/regulator-connector.yaml
+F: drivers/extcon/extcon-regulator.c
+
REISERFS FILE SYSTEM
L: reiserfs-devel at vger.kernel.org
S: Supported
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index 0d42e49105dd..19fe76da6c75 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -143,6 +143,14 @@ config EXTCON_QCOM_SPMI_MISC
Say Y here to enable SPMI PMIC based USB cable detection
support on Qualcomm PMICs such as PM8941.
+config EXTCON_REGULATOR
+ tristate "Regulator output extcon support"
+ depends on REGULATOR
+ help
+ Say y here to enable support for regulator-supplied external
+ power output connections, such as the outlets of a power
+ distribution unit (PDU).
+
config EXTCON_RT8973A
tristate "Richtek RT8973A EXTCON support"
depends on I2C
diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile
index 1b390d934ca9..1a1c32d4b23e 100644
--- a/drivers/extcon/Makefile
+++ b/drivers/extcon/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_EXTCON_MAX8997) += extcon-max8997.o
obj-$(CONFIG_EXTCON_PALMAS) += extcon-palmas.o
obj-$(CONFIG_EXTCON_PTN5150) += extcon-ptn5150.o
obj-$(CONFIG_EXTCON_QCOM_SPMI_MISC) += extcon-qcom-spmi-misc.o
+obj-$(CONFIG_EXTCON_REGULATOR) += extcon-regulator.o
obj-$(CONFIG_EXTCON_RT8973A) += extcon-rt8973a.o
obj-$(CONFIG_EXTCON_SM5502) += extcon-sm5502.o
obj-$(CONFIG_EXTCON_USB_GPIO) += extcon-usb-gpio.o
diff --git a/drivers/extcon/extcon-regulator.c b/drivers/extcon/extcon-regulator.c
new file mode 100644
index 000000000000..eec1bb3f4c09
--- /dev/null
+++ b/drivers/extcon/extcon-regulator.c
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * extcon-regulator: extcon driver for regulator-supplied external power
+ * output connectors
+ *
+ * Copyright (C) 2022 Zev Weiss <zev at bewilderbeest.net>
+ */
+
+#include <linux/extcon-provider.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+struct regulator_extcon_data {
+ struct extcon_dev *edev;
+ struct regulator *reg;
+ struct mutex lock;
+ unsigned int extcon_id;
+};
+
+static ssize_t state_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct regulator_extcon_data *data = dev_get_drvdata(dev);
+ int status = regulator_is_enabled(data->reg);
+
+ if (status < 0)
+ return status;
+
+ return sysfs_emit(buf, "%s\n", status ? "on" : "off");
+}
+
+static ssize_t state_store(struct device *dev, struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ int status, wantstate;
+ struct regulator_extcon_data *data = dev_get_drvdata(dev);
+ struct regulator *reg = data->reg;
+
+ if (sysfs_streq(buf, "on"))
+ wantstate = 1;
+ else if (sysfs_streq(buf, "off"))
+ wantstate = 0;
+ else
+ return -EINVAL;
+
+ mutex_lock(&data->lock);
+
+ status = regulator_is_enabled(reg);
+
+ /*
+ * We need to ensure our enable/disable calls don't get imbalanced, so
+ * bail if we can't determine the current state.
+ */
+ if (status < 0)
+ goto out;
+
+ /* Nothing further needed if we're already in the desired state */
+ if (!!status == wantstate) {
+ status = 0;
+ goto out;
+ }
+
+ if (wantstate)
+ status = regulator_enable(reg);
+ else
+ status = regulator_disable(reg);
+
+out:
+ mutex_unlock(&data->lock);
+
+ return status ? : count;
+}
+
+static DEVICE_ATTR_RW(state);
+
+static struct attribute *regulator_extcon_attrs[] = {
+ &dev_attr_state.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(regulator_extcon);
+
+static int regulator_extcon_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct regulator_extcon_data *data;
+ struct device *dev = &pdev->dev;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->reg = devm_regulator_get_exclusive(&pdev->dev, "vout");
+ if (IS_ERR(data->reg))
+ return PTR_ERR(data->reg);
+
+ mutex_init(&data->lock);
+
+ /* No cables currently supported */
+ data->extcon_id = EXTCON_NONE;
+
+ data->edev = devm_extcon_dev_allocate(dev, &data->extcon_id);
+ if (IS_ERR(data->edev))
+ return PTR_ERR(data->edev);
+
+ ret = devm_extcon_dev_register(dev, data->edev);
+ if (ret < 0)
+ return ret;
+
+ platform_set_drvdata(pdev, data);
+
+ return 0;
+}
+
+static const struct of_device_id regulator_extcon_of_match_table[] = {
+ { .compatible = "regulator-connector" },
+ { },
+};
+
+static struct platform_driver regulator_extcon_driver = {
+ .driver = {
+ .name = "extcon-regulator",
+ .of_match_table = of_match_ptr(regulator_extcon_of_match_table),
+ .dev_groups = regulator_extcon_groups,
+ },
+ .probe = regulator_extcon_probe,
+};
+module_platform_driver(regulator_extcon_driver);
+
+MODULE_AUTHOR("Zev Weiss <zev at bewilderbeest.net>");
+MODULE_DESCRIPTION("Regulator extcon driver");
+MODULE_LICENSE("GPL");
--
2.36.0
More information about the openbmc
mailing list