[PATCH v3 1/3] ARM: dts: nuvoton: Add new device node

[Medad Young]

OK, I will check it.
thanks for your comment

B.R.
Medad

Jonathan Neuschäfer <j.neuschaefer at gmx.net> 於 2022年3月12日 週六 上午10:31寫道：
>
> >Subject: [PATCH v3 1/3] ARM: dts: nuvoton: Add new device node
>
> To make it more obvious what this patch is about, I suggest something like:
>
> [PATCH v3 1/3] ARM: dts: nuvoton: Add memory controller node
>
>
> This arguably makes the next line in the commit message redundant,
> but there is other useful information that can be added there, if you
> like, such as how the kernel is going to use the memory controller.
>
>
> Best regards,
> Jonathan
>
> On Fri, Mar 11, 2022 at 09:42:43AM +0800, Medad CChien wrote:
> >  Add NPCM memory controller device node
> >
> > Signed-off-by: Medad CChien <ctcchien at nuvoton.com>
> > ---
> >  arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi | 7 +++++++
> >  1 file changed, 7 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
> > index 3696980a3da1..ba542b26941e 100644
> > --- a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
> > +++ b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
> > @@ -106,6 +106,13 @@
> >               interrupt-parent = <&gic>;
> >               ranges;
> >
> > +             mc: memory-controller at f0824000 {
> > +                     compatible = "nuvoton,npcm750-memory-controller";
> > +                     reg = <0x0 0xf0824000 0x0 0x1000>;
> > +                     interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> > +                     status = "disabled";
> > +             };
> > +
> >               rstc: rstc at f0801000 {
> >                       compatible = "nuvoton,npcm750-reset";
> >                       reg = <0xf0801000 0x70>;
> > --
> > 2.17.1
> >