[PATCH v1 1/3] dts: add Nuvoton sgpio feature

[Krzysztof Kozlowski]

On 11/03/2022 07:09, jimliu2 wrote:
> add Nuvoton sgpio feature
> 
> Signed-off-by: jimliu2 <JJLIU0 at nuvoton.com>
> ---
>  arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi | 30 +++++++++++++++++++
>  1 file changed, 30 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
> index 3696980a3da1..58f4b463c745 100644
> --- a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
> +++ b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
> @@ -329,6 +329,36 @@
>  				status = "disabled";
>  			};
>  
> +			sgpio1: sgpio at 101000 {

Generic node name.

> +				clocks = <&clk NPCM7XX_CLK_APB3>;
> +				compatible = "nuvoton,npcm750-sgpio";
> +				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> +				gpio-controller;
> +				#gpio-cells = <2>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&iox1_pins>;
> +				bus-frequency = <16000000>;
> +				nin_gpios = <64>;
> +				nout_gpios = <64>;
> +				reg = <0x101000 0x200>;

In each node first goes compatible, then reg.

Best regards,
Krzysztof