[SPAM] [PATCH 1/1] mtd: spi-nor: aspeed: set the decoding size to at least 2MB for AST2600

[Potin Lai (賴柏廷)]

Cédric Le Goater 於 2022/3/8 上午 02:28 寫道:
> On 3/7/22 08:57, Cédric Le Goater wrote:
>>
>>> I tested with spi-mem v3 patch, it looks same issue appeared. (spi-model=mx25l800)
>>>
>>>
>>> [    0.541050] spi-nor spi1.0: mx25l8005 (1024 Kbytes)
>>> aspeed_smc_flash_set_segment CS0 segreg=0x0 [ 0x30000000 - 0x30000000 ]
>>> aspeed_smc_flash_set_segment CS1 segreg=0x7f00010 [ 0x30100000 - 0x38000000 ]
>>> [    0.541976] spi-aspeed-smc 1e630000.spi: Calibration area too uniform, using low speed
>>> [    0.542267] spi-aspeed-smc 1e630000.spi: CE0 read buswidth:1 [0x000b0041]
>>>
>>> I think the model mx25l1606e you tested is 2MB flash.
>>
>> Indeed. Thanks for the test of v3. We should send a followup patch
>> for this 2MB restriction on the minimum size of the flash when the
>> patchset is merged or I will if a v4 is asked for.
>
> Here is an updated version for the spi-mem driver :
>
>   https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Flegoater%2Flinux%2Fcommit%2F418126725d11863b7b51b70ff507d1da6db192c3&data=04%7C01%7CPotin.Lai%40quantatw.com%7Cde46d26422ae4f2dbd1708da0068575f%7C179b032707fc4973ac738de7313561b2%7C1%7C0%7C637822745417263929%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=D594iU1%2BDbDcvC%2BPP1yUWSLhGxlCGfGC4qWXh0QJoH4%3D&reserved=0
> Thanks,
>
> C.


Thanks for taking this patch into spi-mem driver, the tested log as below.

[    1.945705] spi-nor spi1.0: mx25l8005 (1024 Kbytes)
[    1.945926] spi-aspeed-smc 1e630000.spi: CE0 window resized to 2MB (AST2600 Decoding)
aspeed_smc_flash_set_segment CS0 segreg=0x100000 [ 0x30000000 - 0x30200000 ]
aspeed_smc_flash_set_segment CS1 segreg=0x7f00020 [ 0x30200000 - 0x38000000 ]
[    1.953083] spi-aspeed-smc 1e630000.spi: Calibration area too uniform, using low speed
[    1.953409] spi-aspeed-smc 1e630000.spi: CE0 read buswidth:1 [0x000b0041]


By the way, there is a small error when compiling kernel, it needs forward declare for both ast2600_spi_data & ast2600_fmc_data.

Also, I saw you add ast2600_fmc_data for resize checking as well, should I add it in aspeed-smc.c and resend the patch?

Thanks,
Potin