Call for testing: spi-mem driver for Aspeed SMC controllers
Tao Ren
rentao.bupt at gmail.com
Thu Mar 3 17:03:40 AEDT 2022
Hi Cedric,
The "No good frequency" warning is gone after updating spi-max-frequency
to 50MHz in aspeed-g4.dtsi (thanks). I don't see any functional failures,
but flashcp ran slower compared to the mtd/spi-nor driver(~200 sec vs.
~145 sec when flashcp 32MB data to flash1).
Below are the new results on ast2400:
root at wedge100-bmc:~# dmesg | grep -i spi
[ 11.501808] spi-nor spi0.0: mx25l25635e (32768 Kbytes)
[ 11.726388] spi-aspeed-smc 1e620000.spi: CE0 read buswidth:2 [0x203c0641]
[ 11.807925] 5 fixed-partitions partitions found on MTD device spi0.0
[ 11.884113] Creating 5 MTD partitions on "spi0.0":
[ 13.036819] spi-nor spi0.1: mx25l25635e (32768 Kbytes)
[ 13.260858] spi-aspeed-smc 1e620000.spi: CE1 read buswidth:2 [0x203c0641]
[ 13.342318] 1 fixed-partitions partitions found on MTD device spi0.1
[ 13.418426] Creating 1 MTD partitions on "spi0.1":
[ 28.239488] SPI driver bmp280 has no spi_device_id for bosch,bmp085
root at wedge100-bmc:~# cat /proc/mtd
dev: size erasesize name
mtd0: 00060000 00010000 "u-boot"
mtd1: 00020000 00010000 "env"
mtd2: 01b80000 00010000 "fit"
mtd3: 00400000 00010000 "data0"
mtd4: 02000000 00010000 "flash0"
mtd5: 02000000 00010000 "flash1"
root at wedge100-bmc:~# dd if=/dev/urandom of=/tmp/dummy.bin bs=32MB count=1
1+0 records in
1+0 records out
root at wedge100-bmc:~# ls -l /tmp/dummy.bin
-rw-r--r-- 1 root root 32000000 Mar 2 14:45 /tmp/dummy.bin
root at wedge100-bmc:~# time flashcp /tmp/dummy.bin /dev/mtd5
real 3m21.837s
user 0m0.557s
sys 3m4.629s
root at wedge100-bmc:~# time md5sum /dev/mtd5
6903a022e1e8f624ed3beb31aa94c528 /dev/mtd5
real 0m6.869s
user 0m2.492s
sys 0m3.738s
root at wedge100-bmc:~# md5sum /tmp/dummy.bin
7205977a323b482f637123e43ab31a18 /tmp/dummy.bin
And below are the logs after appending "dyndbg" boot args:
root at wedge100-bmc:~# dmesg | grep -i spi
[ 0.000000] Kernel command line: console=ttyS2,9600n8 root=/dev/ram rw dyndbg="file drivers/spi/* +p;"
[ 11.594461] spi-aspeed-smc 1e620000.spi: registered master spi0
[ 11.594628] spi-aspeed-smc 1e620000.spi: CE0 default window [ 0x20000000 - 0x21ffffff ] 32MB
[ 11.594709] spi-aspeed-smc 1e620000.spi: CE0 setup done
[ 11.594763] spi spi0.0: setup mode 0, 8 bits/w, 50000000 Hz max --> 0
[ 11.595737] spi-aspeed-smc 1e620000.spi: CE0 read OP 0x9f mode:1.0.0.1 naddr:0x0 ndummies:0x0 len:0x6
[ 11.595950] spi-aspeed-smc 1e620000.spi: CE0 read OP 0x5a mode:1.1.1.1 naddr:0x3 ndummies:0x1 len:0x10
[ 11.596103] spi-aspeed-smc 1e620000.spi: CE0 read OP 0x5a mode:1.1.1.1 naddr:0x3 ndummies:0x1 len:0x8
[ 11.596226] spi-aspeed-smc 1e620000.spi: CE0 read OP 0x5a mode:1.1.1.1 naddr:0x3 ndummies:0x1 len:0x70
[ 11.596513] spi-aspeed-smc 1e620000.spi: CE0 read OP 0x5a mode:1.1.1.1 naddr:0x3 ndummies:0x1 len:0x24
[ 11.596732] spi-nor spi0.0: mx25l25635e (32768 Kbytes)
[ 11.658369] spi-aspeed-smc 1e620000.spi: CE1 new window [ 0x22000000 - 0x23ffffff ] 32MB
[ 11.658457] spi-aspeed-smc 1e620000.spi: calculate timing compensation - AHB freq: 180 MHz
[ 11.664951] spi-aspeed-smc 1e620000.spi: Trying HCLK/5 [203c0d41] ...
[ 11.692905] spi-aspeed-smc 1e620000.spi: * [00080000] 0 HCLK delay, 4ns DI delay : PASS
[ 11.720911] spi-aspeed-smc 1e620000.spi: * [00000000] 0 HCLK delay, 0ns DI delay : PASS
[ 11.749067] spi-aspeed-smc 1e620000.spi: * [00090000] 1 HCLK delay, 4ns DI delay : PASS
[ 11.749155] spi-aspeed-smc 1e620000.spi: * -> good is pass 1 [0x00000000]
[ 11.749209] spi-aspeed-smc 1e620000.spi: Trying HCLK/4 [203c0641] ...
[ 11.773556] spi-aspeed-smc 1e620000.spi: * [00008000] 0 HCLK delay, 4ns DI delay : PASS
[ 11.797835] spi-aspeed-smc 1e620000.spi: * [00000000] 0 HCLK delay, 0ns DI delay : PASS
[ 11.822419] spi-aspeed-smc 1e620000.spi: * [00009000] 1 HCLK delay, 4ns DI delay : PASS
[ 11.822505] spi-aspeed-smc 1e620000.spi: * -> good is pass 1 [0x00000000]
[ 11.822558] spi-aspeed-smc 1e620000.spi: Found good read timings at HCLK/4
[ 11.822607] spi-aspeed-smc 1e620000.spi: CE0 read buswidth:2 [0x203c0641]
[ 11.904076] 5 fixed-partitions partitions found on MTD device spi0.0
[ 11.980270] Creating 5 MTD partitions on "spi0.0":
[ 13.151908] spi-aspeed-smc 1e620000.spi: registered child spi0.0
[ 13.152074] spi-aspeed-smc 1e620000.spi: CE1 default window [ 0x22000000 - 0x23ffffff ] 32MB
[ 13.152151] spi-aspeed-smc 1e620000.spi: CE1 setup done
[ 13.152201] spi spi0.1: setup mode 0, 8 bits/w, 50000000 Hz max --> 0
[ 13.153185] spi-aspeed-smc 1e620000.spi: CE1 read OP 0x9f mode:1.0.0.1 naddr:0x0 ndummies:0x0 len:0x6
[ 13.153399] spi-aspeed-smc 1e620000.spi: CE1 read OP 0x5a mode:1.1.1.1 naddr:0x3 ndummies:0x1 len:0x10
[ 13.153552] spi-aspeed-smc 1e620000.spi: CE1 read OP 0x5a mode:1.1.1.1 naddr:0x3 ndummies:0x1 len:0x8
[ 13.153674] spi-aspeed-smc 1e620000.spi: CE1 read OP 0x5a mode:1.1.1.1 naddr:0x3 ndummies:0x1 len:0x70
[ 13.153961] spi-aspeed-smc 1e620000.spi: CE1 read OP 0x5a mode:1.1.1.1 naddr:0x3 ndummies:0x1 len:0x24
[ 13.154180] spi-nor spi0.1: mx25l25635e (32768 Kbytes)
[ 13.215872] spi-aspeed-smc 1e620000.spi: CE2 new window [ 0x24000000 - 0x25ffffff ] 32MB
[ 13.215962] spi-aspeed-smc 1e620000.spi: calculate timing compensation - AHB freq: 180 MHz
[ 13.222431] spi-aspeed-smc 1e620000.spi: Trying HCLK/5 [203c0d41] ...
[ 13.250258] spi-aspeed-smc 1e620000.spi: * [00000000] 0 HCLK delay, 4ns DI delay : PASS
[ 13.278256] spi-aspeed-smc 1e620000.spi: * [00000000] 0 HCLK delay, 0ns DI delay : PASS
[ 13.306252] spi-aspeed-smc 1e620000.spi: * [00000000] 1 HCLK delay, 4ns DI delay : PASS
[ 13.306337] spi-aspeed-smc 1e620000.spi: * -> good is pass 1 [0x00000000]
[ 13.306392] spi-aspeed-smc 1e620000.spi: Trying HCLK/4 [203c0641] ...
[ 13.330735] spi-aspeed-smc 1e620000.spi: * [00000000] 0 HCLK delay, 4ns DI delay : PASS
[ 13.355007] spi-aspeed-smc 1e620000.spi: * [00000000] 0 HCLK delay, 0ns DI delay : PASS
[ 13.379274] spi-aspeed-smc 1e620000.spi: * [00000000] 1 HCLK delay, 4ns DI delay : PASS
[ 13.379362] spi-aspeed-smc 1e620000.spi: * -> good is pass 1 [0x00000000]
[ 13.379416] spi-aspeed-smc 1e620000.spi: Found good read timings at HCLK/4
[ 13.379465] spi-aspeed-smc 1e620000.spi: CE1 read buswidth:2 [0x203c0641]
[ 13.460934] 1 fixed-partitions partitions found on MTD device spi0.1
[ 13.537042] Creating 1 MTD partitions on "spi0.1":
[ 14.145255] spi-aspeed-smc 1e620000.spi: registered child spi0.1
[ 28.287508] SPI driver bmp280 has no spi_device_id for bosch,bmp085
[ 116.047752] spi-aspeed-smc 1e620000.spi: CE0 write OP 0x6 mode:1.0.0.0 naddr:0x0 ndummies:0x0 len:0x0
[ 116.047894] spi-aspeed-smc 1e620000.spi: CE0 write OP 0x12 mode:1.1.0.1 naddr:0x4 ndummies:0x0 len:0x44
[ 116.048011] spi-aspeed-smc 1e620000.spi: CE0 read OP 0x5 mode:1.0.0.1 naddr:0x0 ndummies:0x0 len:0x1
[ 116.048109] spi-aspeed-smc 1e620000.spi: CE0 read OP 0x5 mode:1.0.0.1 naddr:0x0 ndummies:0x0 len:0x1
[ 116.048260] spi-aspeed-smc 1e620000.spi: CE0 write OP 0x6 mode:1.0.0.0 naddr:0x0 ndummies:0x0 len:0x0
[ 116.048363] spi-aspeed-smc 1e620000.spi: CE0 write OP 0x12 mode:1.1.0.1 naddr:0x4 ndummies:0x0 len:0xc
[ 116.048461] spi-aspeed-smc 1e620000.spi: CE0 read OP 0x5 mode:1.0.0.1 naddr:0x0 ndummies:0x0 len:0x1
[ 116.049421] spi-aspeed-smc 1e620000.spi: CE0 write OP 0x6 mode:1.0.0.0 naddr:0x0 ndummies:0x0 len:0x0
[ 116.049559] spi-aspeed-smc 1e620000.spi: CE0 write OP 0x12 mode:1.1.0.1 naddr:0x4 ndummies:0x0 len:0x44
[ 116.049676] spi-aspeed-smc 1e620000.spi: CE0 read OP 0x5 mode:1.0.0.1 naddr:0x0 ndummies:0x0 len:0x1
[ 116.049773] spi-aspeed-smc 1e620000.spi: CE0 read OP 0x5 mode:1.0.0.1 naddr:0x0 ndummies:0x0 len:0x1
[ 116.049872] spi-aspeed-smc 1e620000.spi: CE0 write OP 0x6 mode:1.0.0.0 naddr:0x0 ndummies:0x0 len:0x0
[ 116.049969] spi-aspeed-smc 1e620000.spi: CE0 write OP 0x12 mode:1.1.0.1 naddr:0x4 ndummies:0x0 len:0x39
[ 116.050070] spi-aspeed-smc 1e620000.spi: CE0 read OP 0x5 mode:1.0.0.1 naddr:0x0 ndummies:0x0 len:0x1
[ 116.050159] spi-aspeed-smc 1e620000.spi: CE0 read OP 0x5 mode:1.0.0.1 naddr:0x0 ndummies:0x0 len:0x1
[ 116.050307] spi-aspeed-smc 1e620000.spi: CE0 write OP 0x6 mode:1.0.0.0 naddr:0x0 ndummies:0x0 len:0x0
[ 116.050416] spi-aspeed-smc 1e620000.spi: CE0 write OP 0x12 mode:1.1.0.1 naddr:0x4 ndummies:0x0 len:0xc
[ 116.050513] spi-aspeed-smc 1e620000.spi: CE0 read OP 0x5 mode:1.0.0.1 naddr:0x0 ndummies:0x0 len:0x1
Cheers,
Tao
On Wed, Mar 02, 2022 at 07:23:15AM +0100, Cédric Le Goater wrote:
> Hello Tao,
>
> On 3/2/22 07:05, Tao Ren wrote:
> > Hi Cedric,
> >
> > I tested v2 on wedge100 (ast2400) and cmm (ast2500). I don't see any
> > functional failures except below warning on ast2400.
>
> Thanks for the tests
>
> > Is it something we should worry about?
> >
> > > spi-aspeed-smc 1e620000.spi: No good frequency, using dumb slow
>
>
> This means that the training failed for all HCLK settings. We never had
> an AST2400 board with a second device on the FMC controller but we noticed
> that any freq setting above 50MHz was unstable.
>
> Also, aspeed-g4.dtsi does not have any "spi-max-frequency" for flash at 1.
> This needs an update.
>
> > The v2 patch series (10 patches) were applied to linux stable 5.15.25,
> > and below are the outputs on wedge100 (ast2400):
> >
> > root at wedge100-bmc:~# dmesg | grep -i spi
> > [ 11.479736] spi-nor spi0.0: mx25l25635e (32768 Kbytes)
> > [ 11.704313] spi-aspeed-smc 1e620000.spi: CE0 read buswidth:2 [0x203c0641]
> > [ 11.785842] 5 fixed-partitions partitions found on MTD device spi0.0
> > [ 11.862033] Creating 5 MTD partitions on "spi0.0":
> > [ 13.039009] spi-nor spi0.1: mx25l25635e (32768 Kbytes)
> > [ 13.107056] spi-aspeed-smc 1e620000.spi: No good frequency, using dumb slow
> > [ 13.190551] spi-aspeed-smc 1e620000.spi: CE1 read buswidth:2 [0x203c0041]
> > [ 13.271959] 1 fixed-partitions partitions found on MTD device spi0.1
> > [ 13.348097] Creating 1 MTD partitions on "spi0.1":
>
> Curious. The device seems alive and very slow.
>
> Could you please add "dyndbg="file drivers/spi/* +p;" to the bootargs
> and reboot ?
>
>
> > [ 28.169886] SPI driver bmp280 has no spi_device_id for bosch,bmp085
> > root at wedge100-bmc:/tmp# cat /proc/mtd
> > dev: size erasesize name
> > mtd0: 00060000 00010000 "u-boot"
> > mtd1: 00020000 00010000 "env"
> > mtd2: 01b80000 00010000 "fit"
> > mtd3: 00400000 00010000 "data0"
> > mtd4: 02000000 00010000 "flash0"
> > mtd5: 02000000 00010000 "flash1"
> > root at wedge100-bmc:/tmp# ls -l flash-wedge100
> > -rw-r--r-- 1 root root 22867574 Mar 1 20:49 flash-wedge100
> > root at wedge100-bmc:/tmp# time flashcp flash-wedge100 /dev/mtd4
> >
> > real 2m22.860s
> > user 0m0.478s
> > sys 2m10.647s
> > root at wedge100-bmc:/tmp# ls -l flash-wedge100.v2021.13.1
> > -rw-r--r-- 1 root root 19743390 Mar 1 10:10 flash-wedge100.v2021.13.1
> > root at wedge100-bmc:/tmp# time flashcp flash-wedge100.v2021.13.1 /dev/mtd5
> >
> > real 2m23.144s
> > user 0m0.409s
> > sys 2m10.526s
>
> Since spi0.1 seems to be really slow, could you run
>
> time mdsum /dev/mtd5
>
> and compare with flash-wedge100.v2021.13.1 ? But please update
> "spi-max-frequency" in the DT first.
>
> Thanks,
>
> C.
>
> >
> > And here are the outpus on cmm (ast2500):
> >
> > root at cmm001-oob:~# dmesg | grep -i spi
> > [ 15.172879] spi-nor spi0.0: mx25l25635e (32768 Kbytes)
> > [ 15.361516] spi-aspeed-smc 1e620000.spi: CE0 read buswidth:2 [0x203c0641]
> > [ 15.442978] 5 fixed-partitions partitions found on MTD device spi0.0
> > [ 15.519145] Creating 5 MTD partitions on "spi0.0":
> > [ 15.883123] spi-nor spi0.1: mx25l25635e (32768 Kbytes)
> > [ 16.071286] spi-aspeed-smc 1e620000.spi: CE1 read buswidth:2 [0x203c0641]
> > [ 16.152711] 1 fixed-partitions partitions found on MTD device spi0.1
> > [ 16.228830] Creating 1 MTD partitions on "spi0.1":
> > [ 63.831721] SPI driver bmp280 has no spi_device_id for bosch,bmp085
> > root at cmm001-oob:/tmp# cat /proc/mtd
> > dev: size erasesize name
> > mtd0: 00060000 00001000 "u-boot"
> > mtd1: 00020000 00001000 "env"
> > mtd2: 01b80000 00001000 "fit"
> > mtd3: 00400000 00001000 "data0"
> > mtd4: 02000000 00001000 "flash0"
> > mtd5: 02000000 00001000 "flash1"
> > root at cmm001-oob:/tmp# ls -l /tmp/flash-cmm
> > -rw-r--r-- 1 root root 23772278 Mar 1 21:04 /tmp/flash-cmm
> > root at cmm001-oob:/tmp# time flashcp /tmp/flash-cmm /dev/mtd4
> > real 3m37.154s
> > user 0m0.260s
> > sys 3m31.700s
> > root at cmm001-oob:/tmp# ls -l /tmp/flash-cmm.v2021.48.0
> > -rw-r--r-- 1 root root 23723958 Mar 1 21:07 /tmp/flash-cmm.v2021.48.0
> > root at cmm001-oob:/tmp# time flashcp flash-cmm.v2021.48.0 /dev/mtd5
> >
> > real 3m33.843s
> > user 0m0.458s
> > sys 3m28.216s
> >
> >
> > Cheers,
> >
> > Tao
> >
> > On Sun, Feb 27, 2022 at 07:53:37PM +0100, Cédric Le Goater wrote:
> > > On 2/25/22 06:29, Joel Stanley wrote:
> > > > Cedric has authored a new drive for the SPI NOR devices on the ASPEED
> > > > SoCs. It supports 2400, 2500 and 2600. It is written using the spi-mem
> > > > subsystem, which should mean it can go upstream.
> > > >
> > > > This is great news, as our current driver is half upstream, half in
> > > > the openbmc tree, due to some issues getting it merged as part of the
> > > > spi-nor subsystem.
> > > >
> > > > It would be great to have testing. I've created a commit that patches
> > > > in support to whatever kernel tree you're using. Hopefully this makes
> > > > it easier to test atop your internal branches:
> > > >
> > > > https://gerrit.openbmc-project.xyz/c/openbmc/openbmc/+/51551
> > > >
> > > > Cherry pick this commit into your tree, and see how it goes, and report back.
> > > >
> > > > I plan to switch the openbmc tree to this driver when we next rebase
> > > > the kernel. We could also backport it to dev-5.15 as an option.
> > > >
> > > > You can direct testing results to this thread, or reply directly to
> > > > the upstream thread:
> > > >
> > > > https://lore.kernel.org/all/20220214094231.3753686-1-clg@kaod.org/
> > >
> > > or grab the v2 from :
> > >
> > > https://github.com/legoater/linux/tree/openbmc-5.15
> > >
> > > I have addressed the comments on driver bind/unbind.
> > >
> > > Thanks,
> > >
> > > C.
> > >
> > > >
> > > > Cheers,
> > > >
> > > > Joel
> > > >
> > > > ---------- Forwarded message ---------
> > > > From: Cédric Le Goater <clg at kaod.org>
> > > > Date: Mon, 14 Feb 2022 at 09:42
> > > > Subject: [PATCH 00/10] spi: spi-mem: Add driver for Aspeed SMC controllers
> > > > To: <linux-spi at vger.kernel.org>, <linux-mtd at lists.infradead.org>
> > > > Cc: Mark Brown <broonie at kernel.org>, Tudor Ambarus
> > > > <tudor.ambarus at microchip.com>, Pratyush Yadav <p.yadav at ti.com>, Miquel
> > > > Raynal <miquel.raynal at bootlin.com>, Richard Weinberger
> > > > <richard at nod.at>, Vignesh Raghavendra <vigneshr at ti.com>,
> > > > <linux-aspeed at lists.ozlabs.org>, Joel Stanley <joel at jms.id.au>, Andrew
> > > > Jeffery <andrew at aj.id.au>, Chin-Ting Kuo
> > > > <chin-ting_kuo at aspeedtech.com>, <devicetree at vger.kernel.org>, Rob
> > > > Herring <robh+dt at kernel.org>, <linux-arm-kernel at lists.infradead.org>,
> > > > <linux-kernel at vger.kernel.org>, Cédric Le Goater <clg at kaod.org>
> > > >
> > > >
> > > > Hi,
> > > >
> > > > This series adds a new SPI driver using the spi-mem interface for the
> > > > Aspeed static memory controllers of the AST2600, AST2500 and AST2400
> > > > SoCs.
> > > >
> > > > * AST2600 Firmware SPI Memory Controller (FMC)
> > > > * AST2600 SPI Flash Controller (SPI1 and SPI2)
> > > > * AST2500 Firmware SPI Memory Controller (FMC)
> > > > * AST2500 SPI Flash Controller (SPI1 and SPI2)
> > > > * AST2400 New Static Memory Controller (also referred as FMC)
> > > > * AST2400 SPI Flash Controller (SPI)
> > > >
> > > > It is based on the current OpenBMC kernel driver [1], using directly
> > > > the MTD SPI-NOR interface and on a patchset [2] previously proposed
> > > > adding support for the AST2600 only. This driver takes a slightly
> > > > different approach to cover all 6 controllers.
> > > >
> > > > It does not make use of the controller register disabling Address and
> > > > Data byte lanes because is not available on the AST2400 SoC. We could
> > > > introduce a specific handler for new features available on recent SoCs
> > > > if needed. As there is not much difference on performance, the driver
> > > > chooses the common denominator: "User mode" which has been heavily
> > > > tested in [1]. "User mode" is also used as a fall back method when
> > > > flash device mapping window is too small.
> > > >
> > > > Problems to address with spi-mem were the configuration of the mapping
> > > > windows and the calibration of the read timings. The driver handles
> > > > them in the direct mapping handler when some knowledge on the size of
> > > > the flash device is know. It is not perfect but not incorrect either.
> > > > The algorithm is one from [1] because it doesn't require the DMA
> > > > registers which are not available on all controllers.
> > > >
> > > > Direct mapping for writes is not supported (yet). I have seen some
> > > > corruption with writes and I preferred to use the safer and proven
> > > > method of the initial driver [1]. We can improve that later.
> > > >
> > > > The driver supports Quad SPI RX transfers on the AST2600 SoC but it
> > > > didn't have the expected results. Therefore it is not activated yet.
> > > > This needs more tests.
> > > >
> > > > The series does not remove the current Aspeed SMC driver but prepares
> > > > ground for its removal by changing its CONFIG option. This last step
> > > > can be addressed as a followup when the new driver using the spi-mem
> > > > interface has been sufficiently exposed.
> > > >
> > > > Tested on:
> > > >
> > > > * OpenPOWER Palmetto (AST2400)
> > > > * Evaluation board (AST2500)
> > > > * OpenPOWER Witherspoon (AST2500)
> > > > * Evaluation board (AST2600 A0)
> > > > * Rainier board (AST2600)
> > > >
> > > > [1] https://github.com/openbmc/linux/blob/dev-5.15/drivers/mtd/spi-nor/controllers/aspeed-smc.c
> > > > [2] https://patchwork.ozlabs.org/project/linux-aspeed/list/?series=212394
> > > >
> > > > Thanks,
> > > >
> > > > C.
> > > >
> > > > Cédric Le Goater (10):
> > > > mtd: spi-nor: aspeed: Rename Kconfig option
> > > > dt-bindings: spi: Add Aspeed SMC controllers device tree binding
> > > > spi: spi-mem: Add driver for Aspeed SMC controllers
> > > > spi: aspeed: Add support for direct mapping
> > > > spi: aspeed: Adjust direct mapping to device size
> > > > spi: aspeed: Workaround AST2500 limitations
> > > > spi: aspeed: Add support for the AST2400 SPI controller
> > > > spi: aspeed: Calibrate read timings
> > > > ARM: dts: aspeed: Enable Dual SPI RX transfers
> > > > spi: aspeed: Activate new spi-mem driver
> > > >
> > > > drivers/spi/spi-aspeed-smc.c | 1241 +++++++++++++++++
> > > > .../bindings/spi/aspeed,ast2600-fmc.yaml | 92 ++
> > > > arch/arm/boot/dts/aspeed-g4.dtsi | 6 +
> > > > arch/arm/boot/dts/aspeed-g5.dtsi | 7 +
> > > > arch/arm/boot/dts/aspeed-g6.dtsi | 8 +
> > > > drivers/mtd/spi-nor/controllers/Kconfig | 4 +-
> > > > drivers/mtd/spi-nor/controllers/Makefile | 2 +-
> > > > drivers/spi/Kconfig | 11 +
> > > > drivers/spi/Makefile | 1 +
> > > > 9 files changed, 1369 insertions(+), 3 deletions(-)
> > > > create mode 100644 drivers/spi/spi-aspeed-smc.c
> > > > create mode 100644
> > > > Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
> > > >
> > > > --
> > > > 2.34.1
> > >
>
More information about the openbmc
mailing list